BS EN ISO 15609-1-2019

VIP免费
阿拉丁 2024-09-17 85 1.35MB 16 页 12星币
侵权投诉
BSI Standards Publication



Part 1: Arc welding
BS EN ISO 15609‑1:2019
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN ISO 15609-1
October 2019
ICS 25.160.10 Supersedes EN ISO 15609-1:2004
English Version
Specification and qualification of welding procedures for
metallic materials - Welding procedure specification - Part
1: Arc welding (ISO 15609-1:2019)
Descriptif et qualification d'un mode opératoire de
soudage pour les matériaux métalliques - Descriptif
d'un mode opératoire de soudage - Partie 1: Soudage à
l'arc (ISO 15609-1:2019)
Anforderung und Qualifizierung von Schweißverfahren
für metallische Werkstoffe - Schweißanweisung - Teil
1: Lichtbogenschweißen (ISO 15609-1:2019)
This European Standard was approved by CEN on 26 August 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN ISO 15609-1:2019 E
National foreword
This British Standard is the UK implementation of
EN ISO 15609‑1:2019. It is identical to ISO 15609‑1:2019. It supersedes
BS EN ISO 15609‑1:2004, which is withdrawn.
The UK participation in its preparation was entrusted to Technical



request to its secretary.


© The British Standards Institution 2019

ISBN 978 0 539 00266 9
ICS 25.160.10
Compliance with a British Standard cannot confer immunity from
legal obligations.


Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN ISO 15609‑1:2019
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN ISO 15609-1
October 2019
ICS 25.160.10 Supersedes EN ISO 15609-1:2004
English Version
Specification and qualification of welding procedures for
metallic materials - Welding procedure specification - Part
1: Arc welding (ISO 15609-1:2019)
Descriptif et qualification d'un mode opératoire de
soudage pour les matériaux métalliques - Descriptif
d'un mode opératoire de soudage - Partie 1: Soudage à
l'arc (ISO 15609-1:2019)
Anforderung und Qualifizierung von Schweißverfahren
für metallische Werkstoffe - Schweißanweisung - Teil
1: Lichtbogenschweißen (ISO 15609-1:2019)
This European Standard was approved by CEN on 26 August 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN ISO 15609-1:2019 E
BS EN ISO 15609‑1:2019

标签： #ISO

摘要：

BS EN ISO 15609-1-2019 是国际标准化组织发布的关于金属材料焊接工艺规程的正式标准规范，全称为“金属材料焊接工艺规程及认可——第1部分：电弧焊”。该标准规定了焊接工艺预规程（WPS）的内容和格式要求，适用于电弧焊、气焊、激光焊等多种焊接方法。它详细列出了焊接工艺规程中应包含的关键参数，如母材类型、填充金属、焊接位置、预热温度、热处理条件以及焊接电流等。该版本取代了旧版标准，进一步统一和细化了工艺规程的编制与评定流程，旨在确保焊接质量的可追溯性和可重复性。对于制造业、工程检测、

展开>> 收起<<
BS EN ISO 15609-1-2019.pdf

共16页,预览4页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：阿拉丁 分类：国际标准 价格：12星币 属性：16 页 大小：1.35MB 格式：PDF 时间：2024-09-17

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 16
评分 收藏
分享
立即下载 VIP免费下载
客服
关注