ACI-530-13

VIP专免

Carl 2024-09-22 71 6.31MB 388 页 20星币

侵权投诉

Provided by : www.spic.ir

Building Code Requirements

and

Specification for

Masonry Structures

Containing

Building Code Requirements for Masonry Structures

(TMS 402-13/ACI 530-13/ASCE 5-13)

Specification for Masonry Structures

(TMS 602-13/ACI 530.1-13/ASCE 6-13)

and Companion Commentaries

Developed by the Masonry Standards Joint Committee (MSJC)

Advancing the knowledge of masonry

The Masonry Society

105 South Sunset Street, Suite Q

Longmont, CO 80501

www.masonrysociety.org

American Concrete Institute

P.O. Box 9094

Farmington Hills, MI 48333

www.concrete.org

Structural Engineering Institute

of the

American Society of Civil Engineers

1801 Alexander Bell Drive

Reston, VA 20191

www.seinstitute.org

Provided by IHS

Licensee=University of Texas Revised Sub Account/5620001114

Not for Resale, 09/30/2014 04:29:00 MDT

No reproduction or networking permitted without license from IHS

--`,`,,,,`,````````,`,,`````,-`-`,,`,,`,`,,`---

Provided by : www.spic.ir

ABSTRACT

Building Code Requirements and Specification for Masonry Structures contains two standards and their commentaries:

Building Code Requirements for Masonry Structures (TMS 402-13/ACI 530-13/ASCE 5-13) and Specification for

Masonry Structures (TMS 602-13/ACI 530.1-13/ASCE 6-13). These standards are produced through the joint efforts of The

Masonry Society (TMS), the American Concrete Institute (ACI), and the Structural Engineering Institute of the American

Society of Civil Engineers (SEI/ASCE) through the Masonry Standards Joint Committee (MSJC). The Code covers the

design and construction of masonry structures while the Specification is concerned with minimum construction

requirements for masonry in structures. Some of the topics covered in the Code are: definitions, contract documents; quality

assurance; materials; placement of embedded items; analysis and design; strength and serviceability; flexural and axial

loads; shear; details and development of reinforcement; walls; columns; pilasters; beams and lintels; seismic design

requirements; glass unit masonry; veneers; and autoclaved aerated concrete masonry. An empirical design method and a

prescriptive method applicable to buildings meeting specific location and construction criteria are also included. The

Specification covers subjects such as quality assurance requirements for materials; the placing, bonding and anchoring of

masonry; and the placement of grout and of reinforcement. This Specification is meant to be modified and referenced in the

Project Manual. The Code is written as a legal document and the Specification as a master specification required by the Code.

The commentaries present background details, committee considerations, and research data used to develop the Code and

Specification. The Commentaries are not mandatory and are for information of the user only.

The Masonry Standards Joint Committee, which is sponsored by The Masonry Society, the American Concrete Institute, and

the Structural Engineering Institute of the American Society of Civil Engineers, is responsible for these standards and strives

to avoid ambiguities, omissions, and errors in these documents. In spite of these efforts, the users of these documents

occasionally find information or requirements that may be subject to more than one interpretation or may be incomplete or

incorrect. Users who have suggestions for the improvement of these documents are requested to contact TMS.

These documents are intended for the use of individuals who are competent to evaluate the significance and limitations of

its content and recommendations and who will accept responsibility for the application of the material it contains.

Individuals who use this publication in any way assume all risk and accept total responsibility for the application and use of

this information.

All information in this publication is provided “as is” without warranty of any kind, either express or implied, including

but not limited to, the implied warranties of merchantability, fitness for a particular purpose or non-infringement.

The sponsoring organizations, TMS, ACI, and SEI/ASCE, and their members disclaim liability for damages of any kind,

including any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost

profits, which may result from the use of this publication.

It is the responsibility of the user of this document to establish health and safety practices appropriate to the specific

circumstances involved with its use. The sponsoring organizations do not make any representations with regard to health

and safety issues and the use of this document. The user must determine the applicability of all regulatory limitations before

applying the document and must comply with all applicable laws and regulations, including but not limited to, United States

Occupational Safety and Health Administration (OSHA) health and safety standards.

Engineering Institute of the American Society of Civil Engineers, Reston, VA. Watch http://

www.masonrysociety.org/2013MSJC/Errata.htm for possible additional errata.

mechanical, electronic, film, or other distribution and storage media, without the written consent of TMS.

Adopted as standards of the American Concrete Institute (September 13, 2013), the Structural Engineering Institute of the

American Society of Civil Engineers (September 4, 2013), and The Masonry Society (August 27, 2013) to supersede the

2011 edition in accordance with each organization's standardization procedures. These standards were originally adopted

by the American Concrete Institute in November, 1988, the American Society of Civil Engineers in August, 1989, and The

Masonry Society in July, 1992.

ISBN 978-1-929081-43-1

ISBN 1-929081-43-X

Produced in the United States of America

Provided by IHS

Licensee=University of Texas Revised Sub Account/5620001114

Not for Resale, 09/30/2014 04:29:00 MDT

No reproduction or networking permitted without license from IHS

--`,`,,,,`,````````,`,,`````,-`-`,,`,,`,`,,`---

Provided by : www.spic.ir

About the MSJC and its Sponsors

Masonry Standards Joint Committee

The Masonry Standards Joint Committee (MSJC) is, as its name suggests, a joint committee sponsored by The

Masonry Society (TMS), the American Concrete Institute (ACI), and the Structural Engineering Institute of the

American Society of Civil Engineers (SEI/ASCE). Its mission is to develop and maintain design and

construction standards for masonry for reference by or incorporation into model building codes regulating

masonry construction. In practice, the MSJC is responsible for the maintenance of the Building Code

Requirements for Masonry Structures (TMS 402/ACI 530/ASCE 5), Specification for Masonry Structures (TMS

602/ACI 530.1/ASCE 6) and their companion Commentaries. Committee membership is open to all qualified

individuals, within the constraints of balance requirements, balloting schedules and particular needs for

technical expertise. Committee meetings are open to the public.

Committee Activities include:

1. Evaluate and ballot proposed changes to existing standards of the committee.

2. Develop and ballot new standards for masonry.

3. Resolve Negative votes from ballot items.

4. Provide interpretation of existing standards of the Committee.

5. Identify areas of needed research.

6. Sponsor educational seminars and symposia.

7. Monitor international standards.

Additional details of the Committee, its work, and its meeting schedule are posted at www.masonrysociety.org

and can be obtained from The Masonry Society. A roster of the Committee Members during the 2013 Revision

Cycle is shown on the following page.

Advancing the knowledge of masonry

The Masonry Society (TMS) was founded in 1977 as a not-for-profit professional, technical, and educational

association dedicated to the advancement of knowledge on masonry. Today TMS is an international gathering of

people interested in the art and science of masonry, and its members include design engineers, architects, builders,

researchers, educators, building officials, material suppliers, manufacturers, and others who want to contribute to and

benefit from the global pool of knowledge on masonry.

TMS gathers and disseminates technical information through its committees, publications, codes and standards,

newsletter, refereed journal, educational programs, workshops, scholarships, disaster investigation team, and

conferences. The work of TMS is conducted by individual TMS members and through the volunteer committees

composed of both members and non-members. The Masonry Society serves as the lead Society for the support

of the MSJC, and as such, meetings of the committee are held at TMS meetings and activities of the Committee

are managed by TMS.

For more information about TMS, contact The Masonry Society, 105 South Sunset Street, Suite Q, Longmont,

Colorado, 80501-6172 U.S.A; Phone: 303-939-9700; Fax:303-541-9215; E-mail: info@masonrysociety.org;

Website: www.masonrysociety.org

Provided by IHS

Licensee=University of Texas Revised Sub Account/5620001114

Not for Resale, 09/30/2014 04:29:00 MDT

No reproduction or networking permitted without license from IHS

--`,`,,,,`,````````,`,,`````,-`-`,,`,,`,`,,`---

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

ACI-530-13 是由美国混凝土协会（ACI）与美国砌体标准联合委员会（MSJC）共同发布的砌体结构设计及施工规范，全称为《砌体结构建筑规范要求及配筋砌体结构规范》。该标准代替了上一版本 ACI 530-11，主要针对砖、混凝土砌块、石材等砌体材料的承载力设计、构造要求、施工质量控制及抗震性能评估。文档适用于建筑师、结构工程师、施工承包商及项目审核人员，尤其在北美地区被广泛采用为建筑法规的参考依据。其内容涵盖了无筋与配筋砌体墙、柱、梁及基础的设计方法、材料强度取值、连接节点构造、抗风与抗震设

展开>> 收起<<

ACI-530-13.pdf

共388页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

ACI-530-13

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: