AMPP NACE SP0192-2023 Monitoring Corrosion in Oil and Gas Production with Iron Counts 利用铁计数法监测油气生产中的腐蚀情况

VIP专免

潇湘夜雨 2024-09-22 50 526.87KB 16 页 20星币

侵权投诉

NACE SP0192-2023

Revised June 15, 2023

Monitoring Corrosion in Oil and Gas

Production with Iron Counts

reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording,

or otherwise) without the prior written permission of AMPP.

Provided by Accuris under license with NACE

No reproduction or networking permitted without license from Accuris

NACE SP0192-2023

Monitoring Corrosion in Oil and Gas

Production with Iron Counts

This AMPP standard represents a consensus of those individual members who have reviewed this docu-

ment, its scope, and provisions. Its acceptance does not in any respect preclude anyone, whether he or

she has adopted the standard or not, from manufacturing, marketing, purchasing, or using products, pro-

cesses, or procedures not in conformance with this standard. Nothing contained in this AMPP standard is

to be construed as granting any right, by implication or otherwise, to manufacture, sell, or use in connection

with any method, apparatus, or product covered by Letters Patent, or as indemnifying or protecting anyone

against liability for infringement of Letters Patent. This standard represents minimum requirements and

should in no way be interpreted as a restriction on the use of better procedures or materials. Neither is this

standard intended to apply in all cases relating to the subject. Unpredictable circumstances may negate the

usefulness of this standard in specic instances. AMPP assumes no responsibility for the interpretation or

use of this standard by other parties and accepts responsibility for only those ofcial AMPP interpretations

issued by AMPP in accordance with its governing procedures and policies which preclude the issuance of

interpretations by individual volunteers.

Users of this AMPP standard are responsible for reviewing appropriate health, safety, environmental, and

regulatory documents and for determining their applicability in relation to this standard prior to its use. This

AMPP standard may not necessarily address all potential health and safety problems, or environmental haz-

ards associated with the use of materials, equipment, and/or operations detailed or referred to within this

standard. Users of this AMPP standard are also responsible for establishing appropriate health, safety, and

environmental protection practices, in consultation with appropriate regulatory authorities, if necessary, to

achieve compliance with any existing applicable regulatory requirements prior to the use of this standard.

CAUTIONARY NOTICE: AMPP standards are subject to periodic review and may be revised or withdrawn

at any time in accordance with AMPP technical committee procedures. AMPP requires that action be taken

to reafrm, revise, or withdraw this standard no later than ve years from the date of initial publication and

subsequently from the date of each reafrmation or revision. The user is cautioned to obtain the latest

edition. Purchasers of AMPP standards may receive current information on all standards and other AMPP/

NACE/SSPC publications by contacting AMPP Customer Support, 15835 Park Ten Place, Houston, Texas

77084-5145 (Tel: +1-281-228-6200, email: customersupport@ampp.org).

Document History

2023-06-15: Revised by AMPP Standards Committee (SC) 20, Internal Corrosion Management

2012-03-10: Revised by NACE Task Group (TG) 373, “Monitoring Corrosion in Oil and Gas Production with Iron

Counts”

January 1998: Revised by NACE Unit Committee T-1D, “Corrosion Monitoring and Control of Corrosion Environments

in Petroleum Production Operations”

January 1992: Approved as RP0195 by NACE TG T-1C-7, a component of Unit Committee T-1C, “Detection of Corro-

sion in Oileld Equipment”

AMPP values your input. To provide feedback on this standard, please contact: standards@ampp.org

Provided by Accuris under license with NACE

No reproduction or networking permitted without license from Accuris

NACE SP0192-2023

Monitoring Corrosion in Oil and Gas

Production with Iron Counts

Foreword, Scope, Rationale ............................................................................................................................................4

Referenced Standards and Other Consensus Documents .............................................................................................4

Section 1 General .....................................................................................................................................................5

Section 2 Denitions .................................................................................................................................................6

Section 3 Sampling ...................................................................................................................................................6

Section 4 Analysis .....................................................................................................................................................9

Section 5 Interpretation ...........................................................................................................................................10

Other Referenced Documents .......................................................................................................................................15

Appendix A Safety Considerations When Handling H2S (Nonmandatory) .................................................................16

Figures

Figure 1 Typical Water Sampling Ports ...................................................................................................................8

Figure 2 Nomograph Showing Amount of Iron Lost Per Day in a Water Distribution System ...............................12

Figure 3 Graphical Presentation of Iron Production Rate vs. Time Plus Pertinent Operating Information ............14

Provided by Accuris under license with NACE

No reproduction or networking permitted without license from Accuris

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

This document provides the SEO-optimized content for the standard specification titled "AMPP NACE SP0192-2023 Monitoring Corrosion in Oil and Gas Production with Iron Counts," which details the methodology for using iron counts to monitor internal co

展开>> 收起<<

AMPP NACE SP0192-2023 Monitoring Corrosion in Oil and Gas Production with Iron Counts 利用铁计数法监测油气生产中的腐蚀情况.pdf

共16页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

AMPP NACE SP0192-2023 Monitoring Corrosion in Oil and Gas Production with Iron Counts 利用铁计数法监测油气生产中的腐蚀情况

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: