AMPP TR21473-2024 In-Situ Coating of Steel Pipelines via Pigging 通过清管对钢质管道进行现场涂层作业

VIP专免

潇湘夜雨 2024-09-22 35 547.48KB 16 页 20星币

侵权投诉

AMPP TR21473-2024

Approved March 5, 2024

In-Situ Coating of Steel Pipelines via

Pigging

reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording,

or otherwise) without the prior written permission of AMPP.

AMPP values your input. To provide feedback on this standard, please contact: standards@ampp.org

AMPP TR21473-2024

In-Situ Coating of Steel Pipelines via

Pigging

This AMPP technical report represents a consensus of those individual members who have reviewed this document,

its scope, and provisions. Its acceptance does not in any respect preclude anyone, whether he or she has adopted the

technical report or not, from manufacturing, marketing purchasing, or using products, processes, or procedures not in

conformance with this technical report. Nothing contained in this AMPP technical report is to be construed as granting

any right, by implication or otherwise, to manufacture, sell, or use in connection with any method, apparatus, or product

covered by Letters Patent, or as indemnifying or protecting anyone against liability for infringement of Letters Patent.

This technical report represents minimum requirements and should in no way be interpreted as a restriction on the use

of better procedures or materials. Neither is this technical report intended to apply in all cases relating to the subject.

Unpredictable circumstances may negate the usefulness of this technical report in specic instances. AMPP assumes

no responsibility for the interpretation or use of this technical report by other parties and accepts responsibility for only

those ofcial AMPP interpretations issued by AMPP in accordance with its governing procedures and policies which

preclude the issuance of interpretations by individual volunteers.

Users of this AMPP technical report are responsible for reviewing appropriate health, safety, environmental, and regula-

tory documents and for determining their applicability in relation to this technical report prior to its use. This AMPP tech-

nical report may not necessarily address all potential health and safety problems, or environmental hazards associated

with the use of materials, equipment, and/or operations detailed or referred to within this technical report. Users of this

AMPP technical report are also responsible for establishing appropriate health, safety, and environmental protection

practices, in consultation with appropriate regulatory authorities, if necessary, to achieve compliance with any existing

applicable regulatory requirements prior to the use of this technical report.

CAUTIONARY NOTICE: AMPP technical reports are subject to periodic review and may be revised or withdrawn at

any time in accordance with AMPP technical committee procedures. AMPP requires that action be taken to reafrm,

revise, or withdraw this technical report no later than ve years from the date of initial publication and subsequently

from the date of each reafrmation or revision. The user is cautioned to obtain the latest edition. Purchasers of AMPP

technical reports may receive current information on all standards and other AMPP/NACE/SSPC publications by con-

tacting AMPP Customer Support, 15835 Park Ten Place, Houston, Texas 77084-5145 (Tel: +1-281-228-6200, email:

customersupport@ampp.org).

Document History:

2024-03-05: Approved by AMPP Standards Committee (SC) 15, Pipelines and Tanks

AMPP TR21473-2024

In-Situ Coating of Steel Pipelines via

Pigging

Foreword, Scope, Rationale ............................................................................................................................................4

Referenced Standards and Other Consensus Documents .............................................................................................4

Section 1 General .....................................................................................................................................................5

Section 2 Summary of the In-situ Coating Methodology ...........................................................................................5

Section 3 Denitions .................................................................................................................................................6

Section 4 Owner-Provided Information .....................................................................................................................7

Section 5 Applicator Qualications............................................................................................................................8

Section 6 Coating Material ........................................................................................................................................8

Section 7 Surface Preparation of Pipe ....................................................................................................................10

Section 8 Coating Procedures ................................................................................................................................12

Section 9 Inspection and Testing ............................................................................................................................12

Section 10 Summary and Conclusions .....................................................................................................................13

Other Referenced Documents .......................................................................................................................................16

Table 1 Coating Properties ....................................................................................................................................9

Figure 1 Example Decision Tree for Pipeline Chemical Cleaning Process in Preparation for Coating .................14

Figure 2 Example Decision Tree for Coating Application ......................................................................................15

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

This document, AMPP TR21473-2024, provides comprehensive technical guidance on the in-situ coating of steel pipelines through pigging operations, addressing key methodologies, material selection, application procedures, and quality control measures.

展开>> 收起<<

AMPP TR21473-2024 In-Situ Coating of Steel Pipelines via Pigging 通过清管对钢质管道进行现场涂层作业.pdf

共16页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

AMPP TR21473-2024 In-Situ Coating of Steel Pipelines via Pigging 通过清管对钢质管道进行现场涂层作业

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: