AISC 360-05 Specification for Structural Steel Buildings 美国钢结构规范

VIP专免

史蒂文 2024-10-22 66 6.14MB 518 页 18星币

侵权投诉

P1: GIG

GRBT055-FM AISC-Sample (LRFD) June 20, 2005 12:16 Char Count= 0

Specification

for Structural Steel Buildings

March 9, 2005

Supersedes the Load and Resistance Factor Design Specification for Structural Steel

Buildings dated December 27, 1999, the Specification for Structural Steel Buldings—

Allowable Stress Design and Plastic Design dated June 1, 1989, including Supplement

No. 1, the Specification for Allowable Stress Design of Single-Angle Members

dated June 1, 1989, the Load and Resistance Factor Design Specification for Single-

Angle Members dated November 10, 2000, and the Load and Resistance Factor

Design Specification for the Design of Steel Hollow Structural Sections

dated November 10, 2000, and all previous versions of these specifications.

Approved by the AISC Committee on Specifications and issued by the

AISC Board of Directors

AMERICAN INSTITUTE OF STEEL CONSTRUCTION, INC.

One East Wacker Drive, Suite 700

Chicago, Illinois 60601-1802

ANSI/AISC 360-05

An American National Standard

P1: GIG

GRBT055-FM AISC-Sample (LRFD) June 20, 2005 12:16 Char Count= 0

2005

American Institute of Steel Construction, Inc.

must not be reproduced in any form without the

written permission of the publisher.

The information presented in this publication has been prepared in accordance with

recognized engineering principles and is for general information only. While it is

believed to be accurate, this information should not be used or relied upon for any

speciﬁc application without competent professional examination and veriﬁcation

of its accuracy, suitability, and applicability by a licensed professional engineer, de-

signer, or architect. The publication of the material contained herein is not intended

as a representation or warranty on the part of the American Institute of Steel Con-

struction or of any other person named herein, that this information is suitable for

any general or particular use or of freedom from infringement of any patent or

patents. Anyone making use of this information assumes all liability arising from

such use.

Caution must be exercised when relying upon other speciﬁcations and codes de-

veloped by other bodies and incorporated by reference herein since such material

may be modiﬁed or amended from time to time subsequent to the printing of this

edition. The Institute bears no responsibility for such material other than to refer

to it and incorporate it by reference at the time of the initial publication of this

edition.

Printed in the United States of America

Speciﬁcation for Structural Steel Buildings, March 9, 2005

AMERICAN INSTITUTE OF STEEL CONSTRUCTION, INC.

P1: GIG

GRBT055-FM AISC-Sample (LRFD) June 20, 2005 12:16 Char Count= 0

DEDICATION

Professor Lynn S. Beedle

This edition of the AISC Speciﬁcation is dedicated to the memory of Dr. Lynn S. Beedle,

University Distinguished Professor at Lehigh University. Dr. Beedle served as a faculty

member at Lehigh University for 41 years and won a very large number of professional

and educational awards, including the 1973 T.R. Higgins Award and the 2003 Geerhard

Haaijer Award from AISC. He was a major contributor to several editions of the AISC

Speciﬁcation and a long-time member of the AISC Committee on Speciﬁcations. He was

instrumental in the development of plastic design methodologies and its implementation

into the AISC Speciﬁcation. He was Director of the Structural Stability Research Council

for 25 years, and in that role fostered understanding of various stability problems and

helped develop rational design provisions, many of which were adopted in the AISC

Speciﬁcations. In 1969, he founded the Council on Tall Buildings and Urban Habitat

and succeeded in bringing together the disciplines of architecture, structural engineer-

ing, construction, environment, sociology and politics, which underlie every major tall

building project. He was actively involved in this effort until his death in late 2003 at the

age of 85. His contributions to the design and construction of steel buildings will long

be remembered by AISC, the steel industry and the structural engineering profession

worldwide.

Foramore complete discussion of Dr. Beedle’s life and accomplishments, see Catalyst for

Skyscraper Revolution: Lynn S. Beedle—A Legend in his Lifetime by Mir Ali, published

by the Council on Tall Buildings and Urban Habitat (2004).

iii

Speciﬁcation for Structural Steel Buildings, March 9, 2005

AMERICAN INSTITUTE OF STEEL CONSTRUCTION, INC.

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #钢 #结构 #结构规范

摘要：

AISC 360-05 Specification for Structural Steel Buildings 是由美国钢结构学会（AISC）发布的权威钢结构设计规范，专注于建筑钢结构的设计、制造与安装标准。该规范涵盖极限状态设计（LRFD）和容许应力设计（ASD）两大方法，适用于各类建筑钢结构系统，包括框架、桁架、连接节点及抗震设计等。AISC 360-05 成为许多国际工程项目的参考基准，尤其在美国及全球钢结构设计行业中具有广泛认可度。明确的设计准则、材料要求、构件承载能力计算及结构稳定性

展开>> 收起<<

AISC 360-05 Specification for Structural Steel Buildings 美国钢结构规范.pdf

共518页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

AISC 360-05 Specification for Structural Steel Buildings 美国钢结构规范

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: