ANSI AHRI Standard 110-2024 (SI I-P)

VIP专免

逍遥书生 2024-11-26 32 444.47KB 19 页 18星币

侵权投诉

ANSI/AHRI Standard 110-2024 (SI/I-P)

Air-conditioning, Heating and

Refrigerating Equipment

Nameplate Voltages

ICS Code: 29.020

Note:

This standard supersedes AHRI Standard 110-2016.

AHRI CERTIFICATION PROGRAM DISCLAIMER

AHRI Standards are developed independently of AHRI Certification activities and can have scopes that include products that

are not part of the AHRI Certification Program. The scope of the applicable AHRI Certification Program can be found on

AHRI’s website.

IMPORTANT

SAFETY DISCLAIMER

AHRI does not set safety standards and does not certify or guarantee the safety of any products,

components or systems designed, tested, rated, installed or operated in accordance with this

standard/guideline. It is strongly recommended that products be designed, constructed, assembled,

installed and operated in accordance with nationally recognized safety standards and code requirements

appropriate for products covered by this standard/guideline.

AHRI uses its best efforts to develop standards/guidelines employing state-of-the-art and accepted

industry practices. AHRI does not certify or guarantee that any tests conducted under its

standards/guidelines will be non-hazardous or free from risk.

Registered United States Patent and Trademark Office

Printed in USA.

Intent

This standard is intended for the guidance of the industry, including manufacturers, engineers, installers, contractors, and users.

Review and Amendment

This standard is subject to review and amendment as technology advances.

2024 Edition

This edition of AHRI Standard 110, Air-conditioning, Heating, and Refrigerating Equipment Nameplate Voltages, was

prepared by the Electrical Standards Technical Committee (STC). The standard was approved by the Multi-sector Standards

Subcommittee (SSC) on 19 February 2024. This standard was approved as an American National Standard (ANS) on 21 March

2024.

Origin and Development of AHRI Standard 110

The initial publication was ARI Standard 110-1990, Air-Conditioning and Refrigerating Equipment Nameplate Voltages.

Subsequent revisions were:

ARI Standard 110-1997, Air-Conditioning and Refrigerating Equipment Nameplate Voltages

ANSI/AHRI Standard 110-2002, Air-Conditioning, Heating and Refrigerating Equipment Nameplate Voltages

ANSI/AHRI Standard 110-2012, Air-Conditioning, Heating and Refrigerating Equipment Nameplate Voltages

AHRI Standard 110-2016, Air-Conditioning, Heating and Refrigerating Equipment Nameplate Voltages

Summary of Changes

ANSI/AHRI Standard 110-2024 (SI/I-P) contains the following update(s) to the previous edition:

• Update references to current versions

• Reaffirm that the standard remains applicable in 50 hertz countries

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

ANSI AHRI Standard 110-2024 (SI I-P) 是空调、供暖和制冷学会（AHRI）发布的最新版离心式冷水机组性能测试与评级标准。该标准为采用水冷冷凝器和电力驱动、容量在100吨及以上的离心式冷水机组，规定了统一的性能测试方法、额定工况条件以及能效评定要求。2024版同时包含国际单位制（SI）和英制（I-P）两种单位体系，确保在全球范围内的适用性与可比性。标准涵盖了满负荷性能、部分负荷性能、综合部分负荷性能系数（IPLV）及非标准工况下的性能修正计算，并明确了测试所需的仪

展开>> 收起<<

ANSI AHRI Standard 110-2024 (SI I-P).pdf

共19页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

ANSI AHRI Standard 110-2024 (SI I-P)

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: