ACI 318-19(22)与ACI 318-19之间的变化

VIP免费

史蒂文 2024-11-26 121 245.39KB 13 页 18星币

侵权投诉



1



Changes Between ACI 318-19 and ACI 318-19(22)

ACI Committee 318 voted to reapprove ACI 318-19. As part of the reapproval process, the

references in both the Code (listed in Chapter 3) and Commentary (listed after the Appendices)

were reviewed and updated as appropriate. The reapproved document is designated ACI 318-

19(22). Reapproval of a document does not allow technical changes. Therefore, any reference

updates that would have resulted in a technical change were delayed until the next planned Code

revision in 2025. Except for changes to the references, ACI 318-19 and ACI 318-19(22) contain

identical requirements.

The following lists show the references that were updated. Where a minor editorial change was

required in the text, those changes are included at the end of this list.

If you own a copy of ACI 318-19, we suggest that you retain a copy of this file with your copy

of ACI 318-19. If you are planning to purchase a new copy of ACI 318, we suggest that you

purchase ACI 318-19(22) which includes the changes shown below.

In ACI 318-19(22), these changes are not marked in any way. The change bars in the text reflect

the changes between ACI 318-14 and ACI 318-19. Therefore, if you wish to identify the

changes in your copy of ACI 318-19(22), we suggest that you retain a copy of this file with your

copy of ACI 318-19(22).

318-19

Chapter 3 – Code Referenced Standards:

Document Designation and Title

318-19 (Reapproved 2022)

Chapter 3 – Code Referenced Standards:

Document Designation and Title

ACI 301-16—Specifications for Structural Concrete ACI 301-1620—Specifications for Structural

Concrete Construction

ACI 332-14—Requirements for Residential Concrete

Construction an

Commentar

ACI 332-1420—Code Requirements for Residential

Concrete Construction and Commentar

ACI 355.4-11—Qualification of Post-Installed

Adhesive Anchors in Concrete and Commentary

ACI 355.4-1119—Qualification of Post-Installed

Adhesive Anchors in Concrete and Commentary

ACI 369.1-17—Standard Requirements for Seismic

Evaluation and Retrofit of Existing Concrete

Buildings (ACI 369.1-17) and Commentary

ACI 369.1-17—Standard Requirements for Seismic

Evaluation and Retrofit of Existing Concrete

Buildings (ACI 369.1-17) and Commentary

ACI 374.1-05—Acceptance Criteria for Moment

Frames Based on Structural Testing and

Commentary

ACI 374.1-05(19)—Acceptance Criteria for

Moment Frames Based on Structural Testing and

Commentary

ACI 550.5-18—Code Requirements for the Design

of Precast Concrete Diaphragms for Earthquake

Motions (ACI 550.5-18) and Commentary (ACI

550.5R-18)

ACI 550.5-18—Code Requirements for the Design

of Precast Concrete Diaphragms for Earthquake

Motions (ACI 550.5-18) and Commentary (ACI

550.5R-18)

ACI ITG-5.1-07—Acceptance Criteria for Special

Unbonded Post-Tensioned Precast Structural Walls

Based on Validation Testing and Commentary

ITG-5.1-07—Acceptance Criteria for Special Unbonded

Post-Tensioned Precast Structural Walls Based on

Validation Testing and Commentary



2



ACI 550.6-19—Acceptance Criteria for Special

Unbonded Post-Tensioned Precast Structural Walls

Based on Validation Testing and Commentary

ACI ITG-5.2-09—Requirements for Design of a Special

Unbonded Post-Tensioned Precast Shear Wall

Satisfying ACI ITG-5.1 (ACI 5.2-09) and Commentary

ITG-5.2-09—Requirements for Design of a Special

Unbonded Post-Tensioned Precast Shear Wall

Satisfying ACI ITG-5.1 (ACI 5.2-09) and Commentary

ACI 550.7-19—Requirements for Design of a

Special Unbonded Post-Tensioned Precast Shear

Wall Satisfying ACI 550.6 and Commentary

ASTM A184/A184M-17—Standard Specification for

Welded Deformed Steel Bar Mats for Concrete

Reinforcement

ASTM A184/A184M-1719—Standard Specification for

Welded Deformed Steel Bar Mats for Concrete

Reinforcement

ASTM A307-14ε1—Standard Specification for Carbon

Steel Bolts, Studs, and Threaded Rod 60 000 PSI

Tensile Strength

ASTM A307-14ε121—Standard Specification for

Carbon Steel Bolts, Studs, and Threaded Rod 60 000

PSI Tensile Strength

ASTM A370-18—Standard Test Methods and

Definitions for Mechanical Testing of Steel Products

ASTM A370-1821—Standard Test Methods and

Definitions for Mechanical Testing of Steel Products

Title correction:

ASTM A421/A421M-15—Standard Speciﬁcation

for Stress-Relieved Steel Wire for Prestressed

Concrete

Title correction:

ASTM A421/A421M-15—Standard Speciﬁcation

for Stress-Relieved Steel Wire for Prestressed

Concrete

Title correction:

ASTM A722/A722M-18—Standard Specification for

Uncoated High-Strength Steel Bars for Prestressed ing

Concrete

Title correction:

ASTM A722/A722M-18—Standard Specification

for Uncoated High-Strength Steel Bars for

Prestressed ing Concrete

ASTM A767/A767M-16—Standard Specification for

Zinc-Coated (Galvanized) Steel Bars for Concrete

Reinforcement

ASTM A767/A767M-1619—Standard Specification for

Zinc-Coated (Galvanized) Steel Bars for Concrete

Reinforcement

ASTM A775/A775M-17—Standard Specification for

Epoxy-Coated Steel Reinforcing Bars

ASTM A775/A775M-1719—Standard Specification for

Epoxy-Coated Steel Reinforcing Bars

ASTM A884/A884M-14—Standard Specification for

Epoxy-Coated Steel Wire and Welded Wire

Reinforcement

ASTM A884/A884M-1419ε1—Standard Specification

for Epoxy-Coated Steel Wire and Welded Wire

Reinforcement

ASTM A934/A934M-16—Standard Specification for

Epoxy-Coated Prefabricated Steel Reinforcing Bars

ASTM A934/A934M-1619—Standard Specification for

Epoxy-Coated Prefabricated Steel Reinforcing Bars

ASTM A955/A955M-18b—Standard Specification for

Deformed and Plain Stainless Steel Bars for Concrete

Reinforcement

ASTM A955/A955M-18b20a—Standard Specification

for Deformed and Plain Stainless Steel Bars for

Concrete Reinforcement

ASTM A1035/A1035M-16b—Standard Specification

for Deformed and Plain, Low-Carbon, Chromium, Steel

Bars for Concrete Reinforcement

ASTM A1035/A1035M-16b20—Standard Specification

for Deformed and Plain, Low-Carbon, Chromium, Steel

Bars for Concrete Reinforcement

ASTM C31/C31M-19—Standard Practice for Making

and Curing Concrete Test Specimens in the Field

ASTM C31/C31M-1921a—Standard Practice for

Making and Curing Concrete Test Specimens in the

Field

ASTM C39/C39M-18—Standard Test Method for

Compressive Strength of Cylindrical Concrete

Specimens

ASTM C39/C39M-1821—Standard Test Method for

Compressive Strength of Cylindrical Concrete

Specimens



3



ASTM C42/C42M-18a—Standard Test Method for

Obtaining and Testing Drilled Cores and Sawed Beams

of Concrete

ASTM C42/C42M-18a20—Standard Test Method for

Obtaining and Testing Drilled Cores and Sawed Beams

of Concrete

ASTM C94/C94M-18—Standard Specification for

Ready-Mixed Concrete

ASTM C94/C94M-1821b—Standard Specification for

Ready-Mixed Concrete

ASTM C150/C150M-19a—Standard Specification for

Portland Cement

ASTM C150/C150M-19a21—Standard Specification

for Portland Cement

ASTM C192/C192M-18—Standard Practice for Making

and Curing Concrete Test Specimens in the Laboratory

ASTM C192/C192M-1819—Standard Practice for

Making and Curing Concrete Test Specimens in the

Laboratory

ASTM C469/C469M-14—Standard Test Method for

Static Modulus of Elasticity and Poisson’s Ratio of

Concrete in Compression

ASTM C469/C469M-14 ε1—Standard Test Method for

Static Modulus of Elasticity and Poisson’s Ratio of

Concrete in Compression

ASTM C494/C494M-17—Standard Specification for

Chemical Admixtures for Concrete

ASTM C494/C494M-1719—Standard Specification for

Chemical Admixtures for Concrete

ASTM C567/C567M-14—Standard Test Method for

Determining Density of Structural Lightweight Concrete

ASTM C567/C567M-1419—Standard Test Method for

Determining Density of Structural Lightweight Concrete

ASTM C595/C595M-19—Standard Specification for

Blended Hydraulic Cements

ASTM C595/C595M-1921—Standard Specification for

Blended Hydraulic Cements

Title correction:

ASTM C1140/C1140M-11—Standard Practice for

Preparing and Testing Specimens from Shotcrete Test

Panels

ASTM C1140/C1140M-11(2019)—Standard Practice

for Preparing and Testing Specimens from Shotcrete

Test Panels

Title correction:

ASTM C1141/C1141M-15—Standard Specification for

Admixtures for Shotcrete

No Change

ASTM C1157/C1157M-17—Standard Performance

Specification for Hydraulic Cement

ASTM C1157/C1157M-1720a—Standard Performance

Specification for Hydraulic Cement

ASTM C1218/C1218M-17—Standard Test Method for

Water-Soluble Chloride in Mortar and Concrete

ASTM C1218/C1218M-1720—Standard Test Method

for Water-Soluble Chloride in Mortar and Concrete

ASTM C1240-15—Standard Specification for Silica

Fume Used in Cementitious Mixtures

ASTM C1240-1520—Standard Specification for Silica

Fume Used in Cementitious Mixtures

ASTM C1580-15—Standard Test Method for Water-

Soluble Sulfate in Soil

ASTM C1580-1520—Standard Test Method for Water-

Soluble Sulfate in Soil

Title correction:

ASTM C1604/C1604M-05(2012)—Standard Test

Method for Obtaining and Testing Drilled Cores of

Shotcrete

ASTM C1604/C1604M-05(20122019)—Standard Test

Method for Obtaining and Testing Drilled Cores of

Shotcrete

ASTM C1609/C1609M-12—Standard Test Method for

Flexural Performance of Fiber-Reinforced Concrete

(Using Beam With Third-Point Loading)

ASTM C1609/C1609M-1219a—Standard Test Method

for Flexural Performance of Fiber-Reinforced Concrete

(Using Beam With Third-Point Loading)

AWS D1.1/D1.1M:2015—Structural Welding Code –

Steel

AWS D1.1/D1.1M:20152020—Structural Welding

Code – Steel

Title correction: No Change

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

本文详细解析了ACI 318-19(22)与ACI 318-19之间的关键变化，重点涵盖结构混凝土设计规范在2022年补充修订中的更新内容，包括抗震设计要求的强化、材料性能参数的调整、以及施工与验收条款的改进。通过对比新旧版本的主要差异，帮助工程师、设计师及施工人员快速掌握最新规范的核心变动，确保项目设计与施工符合当前国际标准，提升结构安全性与合规性。

展开>> 收起<<

ACI 318-19(22)与ACI 318-19之间的变化.pdf

共13页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

ACI 318-19(22)与ACI 318-19之间的变化

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: