JIS Z3198-2-2003

VIP免费
老杨树 2024-12-30 14 439.06KB 9 页 14星币
侵权投诉
J
IS
JAPANESE
I
NDUSTRIAL
STANDARD
Translated and Published
by
Japanese Standards Association
Test
methods
for
lead-free
solders-
Part
2
:
Methods
for
testing
mec hanical
c
haracteristics-tensi
le
test
ICs
25.160.50
Reference
number
:
JIS
2
3198-2
:
2003
(E)
PROTECTED
BY
COPYRIGHT
6s
Copyright Japanese Standards Association
Provided by IHS under license with JSA
Licensee=Hong Kong Polytechnic Univ/9976803100
Not for Resale, 08/01/2009 04:29:21 MDT
No reproduction or networking permitted without license from IHS
--```,`,,`,,,````,,,```,,``,`-`-`,,`,,`,`,,`---
　
Z
3198-2
:
2003
Foreword
This translation has been made based on the original Japanese Industrial Standard
established by the Minister of Economy, Trade and Industry through deliberations
at
the
Japanese Industrial Standards Committee according to the proposal of establishing a
Japanese Industrial Standard from The Japan Welding Engineering Society
(JWES),
with
a draft
of
Industrial Standard based on the provision of Article
12
Clause
1
of
the Industrial
Standardization Law.
Soldering is called HANDAZUKE (Japanese), a technique to be used for mounting
electronic and electrical machinery and apparatus, communication equipment and the like
and its use field is wide and expectation for high reliability of the connection
is
large.
Though there are standards inside and outside Japan as well as International Standards
like
IEC
or
ISO,
this Standard uses results of "standardization of test methods and the
like necessary for solder connection corresponding to the reduction
of
an environmental
load" based on the research and development by contract of New Energy and Industrial
Technology Development Organization.
This Standard concerns the methods for testing mechanical characteristics (tensile
test)
of
lead-free solders which are environmentally friendly and
is
positioned
as
a standard
for considering environment.
Attention is drawn to the possibility that some parts of this Standard may conflict with
a patent right, application for
a
patent after opening to the public, utility model right
or
application for registration of utility model after opening to the public which have technical
properties. The relevant Minister and the Japanese Industrial Standards Committee are
not responsible for identifying the patent right, application for a patent after opening
to
the public, utility model right or application for registration
of
utility model
after
opening
to the public which have the said technical properties.
JIS
Z
3198
includes the following
7
parts with the general title
Test methods
for
lead-
free solders
Part
1
:
Methods for measuring of melting temperature ranges
Part
2
:
Methods for testing
of
mechanical characteristics-tensile test
Part
3
:
Methods
for
spread test
Part
4
:
Methods
for
solderability test by a wetting balance method and a contact angle
Part
5
:
Methods for tensile tests and shear tests on solder joints
Part
6
:
Methods for
45
"pull
test of solder joints
on
QFP lead
Part
7
:
Methods for shear strength
of
solder joints on chip components
method
Date of Establishment:
2003-06-20
Date of Public Notice in Official Gazette:
2003-06-20
Investigated by: Japanese Industrial Standards Committee
Standards Board
Technical Committee on Welding
JIS
Z
3198-2
:
2003,
First
English
edition
published
in
2003-12
Translated and
published
by:
Japanese Standards Association
4-1-24, Akasaka, Minato-ku, Tokyo,
107-8440
JAPAN
In
the event
of
any
doubts
arising as
to
the
contents,
the original
TIS
is
to
be
the
final authority.
O
JSA
2003
All rights reserved. Unless otherwise specified, no part of this publication may
be
reproduced
or
utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
Printed in Japan
PROTECTED
BY
COPYRIGHT
Copyright Japanese Standards Association
Provided by IHS under license with JSA
Licensee=Hong Kong Polytechnic Univ/9976803100
Not for Resale, 08/01/2009 04:29:21 MDT
No reproduction or networking permitted without license from IHS
--```,`,,`,,,````,,,```,,``,`-`-`,,`,,`,`,,`---
摘要：

JIS Z3198-2-2003 是日本工业标准中关于无铅钎料试验方法的第二部分，主要规定了焊接材料在拉伸测试中的具体技术要求和步骤。该标准适用于电子组装行业中无铅钎料的性能评估，特别是对钎焊接头强度和延展性的检测。通过遵循此标准，企业可以确保焊接材料的可靠性，提升产品质量与一致性。文档详细描述了试样制备、测试条件及结果计算方法，为研发、质量控制及工程应用提供权威参考，是电子制造领域确保合规性与工艺优化的重要工具。

展开>> 收起<<
JIS Z3198-2-2003.pdf

共9页,预览4页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：老杨树 分类：国际标准 价格：14星币 属性：9 页 大小：439.06KB 格式：PDF 时间：2024-12-30

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 9
评分 收藏
分享
立即下载 VIP免费下载
客服
关注