IPC JPCA 6801-2000

VIP专免

Carl 2024-09-01 24 441.96KB 41 页 22星币

侵权投诉

IPC/JPCA

6801

Terms and Deﬁnitions,

Test Methods, and Design

Examples for Build-Up/High

Density Interconnect (HDI)

Printed Wiring Boards

ASSOCIATION CONNECTING

ELECTRONICS INDUSTRIES

2215 Sanders Road, Northbrook, IL 60062-6135

Tel. 847.509.9700 Fax 847.509.9798

www.ipc.org

IPC/JPCA-6801

January 2000 A joint standard developed by IPC and JPCA

The Principles of

Standardization In May 1995 the IPC’s Technical Activities Executive Committee adopted Principles of

Standardization as a guiding principle of IPC’s standardization efforts.

Standards Should:

• Show relationship to Design for Manufacturability

(DFM) and Design for the Environment (DFE)

• Minimize time to market

• Contain simple (simpliﬁed) language

• Just include spec information

• Focus on end product performance

• Include a feedback system on use and

problems for future improvement

Standards Should Not:

• Inhibit innovation

• Increase time-to-market

• Keep people out

• Increase cycle time

• Tell you how to make something

• Contain anything that cannot

be defended with data

Notice IPC Standards and Publications are designed to serve the public interest through eliminating

misunderstandings between manufacturers and purchasers, facilitating interchangeability and

improvement of products, and assisting the purchaser in selecting and obtaining with minimum

delay the proper product for his particular need. Existence of such Standards and Publications

shall not in any respect preclude any member or nonmember of IPC from manufacturing or sell-

ing products not conforming to such Standards and Publication, nor shall the existence of such

Standards and Publications preclude their voluntary use by those other than IPC members,

whether the standard is to be used either domestically or internationally.

Recommended Standards and Publications are adopted by IPC without regard to whether their

adoption may involve patents on articles, materials, or processes. By such action, IPC does

not assume any liability to any patent owner, nor do they assume any obligation whatever to

parties adopting the Recommended Standard or Publication. Users are also wholly responsible

for protecting themselves against all claims of liabilities for patent infringement.

IPC Position

Statement on

Specification

Revision Change

It is the position of IPC’s Technical Activities Executive Committee (TAEC) that the use and

implementation of IPC publications is voluntary and is part of a relationship entered into by

customer and supplier. When an IPC standard/guideline is updated and a new revision is pub-

lished, it is the opinion of the TAEC that the use of the new revision as part of an existing

relationship is not automatic unless required by the contract. The TAEC recommends the use

of the lastest revision. Adopted October 6. 1998

Why is there

a charge for

this standard?

Your purchase of this document contributes to the ongoing development of new and updated

industry standards. Standards allow manufacturers, customers, and suppliers to understand one

another better. Standards allow manufacturers greater efficiencies when they can set up their

processes to meet industry standards, allowing them to offer their customers lower costs.

IPC spends hundreds of thousands of dollars annually to support IPC’s volunteers in the

standards development process. There are many rounds of drafts sent out for review and

the committees spend hundreds of hours in review and development. IPC’s staff attends and

participates in committee activities, typesets and circulates document drafts, and follows all

necessary procedures to qualify for ANSI approval.

IPC’s membership dues have been kept low in order to allow as many companies as possible

to participate. Therefore, the standards revenue is necessary to complement dues revenue. The

price schedule offers a 50% discount to IPC members. If your company buys IPC standards,

why not take advantage of this and the many other beneﬁts of IPC membership as well? For

more information on membership in IPC, please visit www.ipc.org or call 847/790-5372.

Thank you for your continued support.

Any

copying, scanning or other reproduction of these materials without the prior written consent of the copyright holder is strictly prohibited and

constitutes infringement under the Copyright Law of the United States.

IPC/JPCA-6801

Terms and Definitions,

Test Methods, and Design

Examples for Build-Up

Printed Wiring Boards

Developed by the HDI Committee of the Japan Printed Circuit

Association (JPCA) and adopted by the HDI Committee (D-40)

of IPC

Users of this standard are encouraged to participate in the

development of future revisions.

Contact:

IPC

2215 Sanders Road

Northbrook, Illinois

60062-6135

Tel 847 509.9700

Fax 847 509.9798

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

IPC JPCA 6801-2000 是国际电子工业连接协会（IPC）与日本电子电路工业协会（JPCA）联合制定的一项关于印制板（PCB）与印制板组件（PCBA）可接受性标准的重要规范性文件。该标准发布于2000年，旨在统一评估电子组装过程中各类缺陷的判定依据，包括焊接质量、清洁度、机械损伤及材料完整性等方面。它为电子制造企业、质量检测机构以及供应链管理提供了明确的技术基准，有助于减少生产过程中的分歧与返工率，提升产品一致性与可靠性。此版本作为早期经典的IPC JPCA系列标准之一，至今仍在部分

展开>> 收起<<

IPC JPCA 6801-2000.pdf

共41页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

IPC JPCA 6801-2000

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: