IPC 1752A-2014

VIP专免

Carl 2024-09-01 28 587.37KB 60 页 20星币

侵权投诉

IPC-1752A

with Amendments 1 and 2

2014 - February

Materials Declaration Management

Supersedes IPC-1752A with Amendment 1

November 2012

A standard developed by IPC

Association Connecting Electronics Industries

The Principles of

Standardization

In May 1995 the IPC’s Technical Activities Executive Committee (TAEC) adopted Principles of

Standardization as a guiding principle of IPC’s standardization efforts.

Standards Should:

• Show relationship to Design for Manufacturability

(DFM) and Design for the Environment (DFE)

• Minimize time to market

• Contain simple (simpliﬁed) language

• Just include spec information

• Focus on end product performance

• Include a feedback system on use and

problems for future improvement

Standards Should Not:

• Inhibit innovation

• Increase time-to-market

• Keep people out

• Increase cycle time

• Tell you how to make something

• Contain anything that cannot

be defended with data

Notice IPC Standards and Publications are designed to serve the public interest through eliminating mis-

understandings between manufacturers and purchasers, facilitating interchangeability and improve-

ment of products, and assisting the purchaser in selecting and obtaining with minimum delay the

proper product for his particular need. Existence of such Standards and Publications shall not in

any respect preclude any member or nonmember of IPC from manufacturing or selling products

not conforming to such Standards and Publication, nor shall the existence of such Standards and

Publications preclude their voluntary use by those other than IPC members, whether the standard

is to be used either domestically or internationally.

Recommended Standards and Publications are adopted by IPC without regard to whether their adop-

tion may involve patents on articles, materials, or processes. By such action, IPC does not assume

any liability to any patent owner, nor do they assume any obligation whatever to parties adopting

the Recommended Standard or Publication. Users are also wholly responsible for protecting them-

selves against all claims of liabilities for patent infringement.

IPC Position

Statement on

Specification

Revision Change

It is the position of IPC’s Technical Activities Executive Committee that the use and implementation

of IPC publications is voluntary and is part of a relationship entered into by customer and supplier.

When an IPC publication is updated and a new revision is published, it is the opinion of the TAEC

that the use of the new revision as part of an existing relationship is not automatic unless required

by the contract. The TAEC recommends the use of the latest revision. Adopted October 6, 1998

Why is there

a charge for

this document?

Your purchase of this document contributes to the ongoing development of new and updated indus-

try standards and publications. Standards allow manufacturers, customers, and suppliers to under-

stand one another better. Standards allow manufacturers greater efficiencies when they can set

up their processes to meet industry standards, allowing them to offer their customers lower costs.

IPC spends hundreds of thousands of dollars annually to support IPC’s volunteers in the standards

and publications development process. There are many rounds of drafts sent out for review and

the committees spend hundreds of hours in review and development. IPC’s staff attends and par-

ticipates in committee activities, typesets and circulates document drafts, and follows all necessary

procedures to qualify for ANSI approval.

IPC’s membership dues have been kept low to allow as many companies as possible to participate.

Therefore, the standards and publications revenue is necessary to complement dues revenue. The

price schedule offers a 50% discount to IPC members. If your company buys IPC standards and

publications, why not take advantage of this and the many other beneﬁts of IPC membership as

well? For more information on membership in IPC, please visit www.ipc.org or call 847/597-2872.

Thank you for your continued support.

copying, scanning or other reproduction of these materials without the prior written consent of the copyright holder is strictly prohibited and

constitutes infringement under the Copyright Law of the United States.

IPC-1752A with Amendments 1 and 2

Materials Declaration

Management

Developed by the Materials Declaration Task Group (2-18b) of the

Supplier Declaration Subcommittee (2-18) of IPC

Users of this publication are encouraged to participate in the

development of future revisions.

Contact:

IPC

3000 Lakeside Drive, Suite 309S

Bannockburn, Illinois

60015-1249

Tel 847 615.7100

Fax 847 615.7105

Supersedes:

IPC-1752A with Amendment 1 -

November 2012

IPC-1752A - February 2010

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

IPC 1752A-2014是国际电子工业联接协会（IPC）发布的关于材料声明管理的标准规范，旨在统一电子供应链中材料成分、物质含量及合规信息的交换格式与流程。该标准替代了早期版本，支持企业高效满足RoHS、REACH、无冲突矿产等全球环保法规要求，通过标准化的数据字段和XML模板，减少供应商与制造商之间的沟通成本与数据误差。IPC 1752A-2014适用于电子组件、系统及包装材料的材料声明，帮助组织实现供应链透明化、自动化合规审查及风险管控，是电子行业推动绿色制造与可持续发展的重要工具。

展开>> 收起<<

IPC 1752A-2014.pdf

共60页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

IPC 1752A-2014

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: