法国标准 NF EN 10246-6-2000 (FR)

VIP免费

乔大爷开音响 2025-03-04 13 103.94KB 14 页 10星币

侵权投诉

FE101343 ISSN 0335-3931

NF EN 10246-6

August 2000

Classification index: A 49-875-6

European standard

French standard

Published and distributed by Association Française de Normalisation (AFNOR — French standard institute) — 11, avenue Francis de Pressensé —

93571 Saint-Denis La Plaine Cedex — Tel.: + 33 (0)1 41 62 80 00 — Fax: + 33 (0)1 49 17 90 00 — www.afnor.fr

ICS: 77.040.20; 77.140.75

Non-destructive testing of steel tubes

Part 6: Automatic full peripheral ultrasonic testing of seamless

steel tubes for the detection of transverse imperfections

F : Essais non destructifs des tubes en acier — Partie 6 : Contrôle automatique par

ultrasons sur toute la circonférence des tubes pour la détection des imperfections

transversales des tubes en acier sans soudure

D : Zerstörungsfreie Prüfung von Stahlrohren — Teil 6: Automatische

Ultraschallprüfung nahtloser Stahlrohre über den gesamten Rohrumfang

zum Nachweis von Querfehlern

French standard approved

by decision of the Director General of AFNOR on July 5, 2000 taking effect on

August 5, 2000.

Correspondence The European Standard EN 10246-6:1999 has the status of French standard.

Analysis This document specifies requirements for the automatic full peripheral ultrasonic test-

ing of seamless tubes using shear waves, for the detection of transverse imperfections.

Descriptors Technical International Thesaurus: metal tubes, steel tubes, seamless tubes, non-

destructive tests, ultrasonic tests, inspection, quality control, detection, defects, cal-

ibration, acceptability.

Modifications

Corrections

SAGAWEB pour : EDF R&D EDF Branche Energies le 23/5/2003 - 17:14

EUROPEAN STANDARD

NORME EUROPÉENNE

EUROPÄISCHE NORM

EN 10246-6

November 1999

ICS 23.040.10; 77.040.20

English version

Non-destructive testing of steel tubes - Part 6: Automatic full

peripheral ultrasonic testing of seamless steel tubes for the

detection of transverse imperfections

Essais non destructifs des tubes en acier - Partie 6:

Contrôle automatique par ultrasons sur toute la

circonférence des tubes pour la détection des imperfections

transversales des tubes en acier sans soudure

Zerstörungsfreie Prüfung von Stahlrohren - Teil 6:

Automatische Ultraschallprüfung nahtloser Stahlrohre über

den gesamten Rohrumfang zum Nachweis von Querfehlern

This European Standard was approved by CEN on 6 October 1999.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,

Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Central Secretariat: rue de Stassart, 36 B-1050 Brussels

worldwide for CEN national Members. Ref. No. EN 10246-6:1999 E

SAGAWEB pour : EDF R&D EDF Branche Energies le 23/5/2003 - 17:14

Page 2

EN 10246-6:1999

Contents

Page

Foreword 3

1 Scope 4

2 General requirements 4

3 Method of test 4

4 Reference standards 5

5 Equipment calibration and checking 8

6 Acceptance 9

7 Test reporting 10

Annex A (informative) Table of parts of EN 10246 - Non-destructive testing of steel

tubes 11

Annex B (normative) Manual/semi-automatic ultrasonic testing of untested

ends/suspect areas 12

SAGAWEB pour : EDF R&D EDF Branche Energies le 23/5/2003 - 17:14

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

法国标准 NF EN 10246-6-2000 (FR) 是欧洲标准体系下针对钢管无损检测的重要技术规范，专门规定了采用涡流法对焊接钢管进行缺陷检测的试验方法与验收要求。该标准由法国标准化协会（AFNOR）采纳并发布，适用于碳钢及低合金钢焊接钢管的在线或离线涡流检测，旨在确保钢管在制造过程中的内部和表面缺陷能被有效识别，从而提升产品质量与使用安全性。内容涵盖检测原理、设备校准、对比试样制备、检测流程及结果判定等关键环节，为钢管生产企业、质量检验机构及工程采购方提供了统一的技术依据。掌握该标准有助

展开>> 收起<<

法国标准 NF EN 10246-6-2000 (FR).pdf

共14页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

法国标准 NF EN 10246-6-2000 (FR)

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: