美国军用复合材料手册 MIL-HDBK-17-2F 英文版 2002

VIP免费

那山那人那狗 2025-03-12 59 3.21MB 529 页 16星币

侵权投诉

NOT MEASUREMENT

SENSITIVE

MIL-HDBK-17-2F

Volume 2 of 5

17 JUNE 2002

SUPERSEDING

MIL-HDBK-17-2E

Volume 2 of 5

24 MAY 1999

DEPARTMENT OF DEFENSE

HANDBOOK

COMPOSITE MATERIALS HANDBOOK

VOLUME 2. POLYMER MATRIX COMPOSITES

MATERIALS PROPERTIES

This handbook is for guidance only. Do not cite this document as a requirement.

AMSC N/A AREA CMPS

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

MIL-HDBK-17-2F

Volume 2, Foreword / Table of Contents

FOREWORD

1. This Composite Materials Handbook Series, MIL-HDBK-17, are approved for use by all Departments

and Agencies of the Department of Defense.

2. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the con-

tractor does not have to comply. This mandate is a DoD requirement only; it is not applicable to the

Federal Aviation Administration (FAA) or other government agencies.

3. Every effort has been made to reflect the latest information on polymer (organic), metal, and ceramic

composites. The handbook is continually reviewed and revised to ensure its completeness and cur-

rentness. Documentation for the secretariat should be directed to: Materials Sciences Corporation,

MIL-HDBK-17 Secretariat, 500 Office Center Drive, Suite 250, Fort Washington, PA 19034.

4. MIL-HDBK-17 provides guidelines and material properties for polymer (organic), metal, and ceramic

matrix composite materials. The first three volumes of this handbook currently focus on, but are not

limited to, polymeric composites intended for aircraft and aerospace vehicles. Metal matrix

composites (MMC) and ceramic matrix composites (CMC), including carbon-carbon composites (C-C)

are covered in Volume 4 and Volume 5 , respectively.

5. This standardization handbook has been developed and is being maintained as a joint effort of the

Department of Defense and the Federal Aviation Administration.

6. The information contained in this handbook was obtained from materials producers, industry, reports

on Government sponsored research, the open literature, and by contact with research laboratories

and those who participate in the MIL-HDBK-17 coordination activity.

7. All information and data contained in this handbook have been coordinated with industry and the U.S.

Army, Navy, Air Force, NASA, and Federal Aviation Administration prior to publication.

8. Copies of this document and revisions thereto may be obtained from the Document Automation and

Production Service (DAPS), Bldg. 4D, (DODSSP/ASSIST), 700 Robbins Avenue, Building 4D,

Philadelphia, PA 19111-5094.

9. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of

use in improving this document should be addressed to: U.S. Army Research Laboratory, Weapons

and Materials Research Directorate, ATTN: AMSRL-WM-MA, Aberdeen Proving Ground, MD 21005-

5069, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at

the end of this document or by letter.

ACKNOWLEDGEMENT

The services necessary for the development and maintenance of the Composite Materials Handbook

(MIL-HDBK-17) are provided by the handbook Secretariat, Materials Sciences Corporation. This work is

performed under contract with the US Army Research Laboratory (Contract Number DAAL01-97-C-0140).

The primary source of funding for the current contract is the Federal Aviation Administration. Other

sources include NASA, Army, Department of Energy, and Air Force. Volunteer committee members from

government, industry, and academia coordinate and review all the information provided in this handbook.

The time and effort of the volunteers and the support of their respective departments, companies, and

universities make it possible to insure completeness, accuracy, and state-of-the-art composite technology.

MIL-HDBK-17-2F

Volume 2 Foreword / Table of Contents

CONTENTS

PARAGRAPH PAGE

iii

FOREWORD...............................................................................................................................................ii

Summary of Changes ................................................................................................................................xi

CHAPTER 1 GENERAL INFORMATION ............................................................................................. 1

1.1 INTRODUCTION........................................................................................................................ 1

1.2 PURPOSE AND SCOPE OF VOLUME 2 .................................................................................. 1

1.3 ORGANIZATION OF DATA IN HANDBOOK.............................................................................. 2

1.3.1 Fiber properties................................................................................................................ 2

1.3.2 Matrix properties .............................................................................................................. 2

1.3.3 Composite properties....................................................................................................... 2

1.4 PRESENTATION OF DATA........................................................................................................3

1.4.1 Data set description ......................................................................................................... 3

1.4.2 Summary tables............................................................................................................... 4

1.4.3 Individual data tables - normalized data .........................................................................11

1.4.4 Individual data tables - unnormalized data .................................................................... 14

1.4.5 Individual data tables - notched laminate data .............................................................. 14

1.4.6 Individual data tables - bearing data.............................................................................. 15

1.4.7 Individual data tables - bearing/bypass data ................................................................. 15

1.5 MATERIALS SYSTEMS........................................................................................................... 20

1.5.1 Materials system codes ................................................................................................. 20

1.5.2 Index of materials .......................................................................................................... 20

1.6 MATERIAL ORIENTATION CODES......................................................................................... 20

1.6.1 Laminate orientation codes............................................................................................ 20

1.6.2 Braiding orientation codes ............................................................................................. 22

1.7 SYMBOLS, ABBREVIATIONS, AND SYSTEMS OF UNITS.................................................... 22

1.7.1 Symbols and abbreviations............................................................................................ 22

1.7.1.1 Constituent properties ........................................................................................ 27

1.7.1.2 Laminae and laminates ...................................................................................... 28

1.7.1.3 Subscripts........................................................................................................... 29

1.7.1.4 Superscripts ....................................................................................................... 29

1.7.1.5 Acronyms ........................................................................................................... 30

1.7.2 System of units .............................................................................................................. 32

1.8 DEFINITIONS........................................................................................................................... 33

REFERENCES ................................................................................................................................... 55

CHAPTER 2 FIBER PROPERTIES......................................................................................................1

2.1 INTRODUCTION........................................................................................................................ 1

2.2 CARBON FIBERS...................................................................................................................... 1

2.3 ARAMID FIBERS ....................................................................................................................... 1

2.4 GLASS FIBERS ......................................................................................................................... 1

2.5 BORON FIBERS ........................................................................................................................ 1

2.6 ALUMINA FIBERS ..................................................................................................................... 1

2.7 SILICON CARBIDE FIBERS......................................................................................................1

2.8 QUARTZ FIBERS....................................................................................................................... 1

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #复合材料 #材料

摘要：

本页面提供美国军用复合材料手册 MIL-HDBK-17-2F 英文版（2002年发布）的详细内容与资源信息。该手册由美国国防部编制，是复合材料领域权威技术标准，涵盖聚合物基复合材料的性能数据、设计准则、测试方法及质量保证要求。适用于航空航天、国防及高端制造行业的工程师、研究人员及技术管理人员，为材料选型与结构设计提供可靠参考依据。手册内容包括层压板性能、夹芯结构、环境效应等关键技术章节，有助于用户深入理解军用复合材料的工程应用与规范要求。

展开>> 收起<<

美国军用复合材料手册 MIL-HDBK-17-2F 英文版 2002.pdf

共529页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

美国军用复合材料手册 MIL-HDBK-17-2F 英文版 2002

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

美国军用 复合材料手册 MIL-HDBK-17-2F 英文版 2002

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

美国军用复合材料手册 MIL-HDBK-17-2F 英文版 2002