法国标准 NF P 18-710-2016 UHPC National addition to Eurocode 2 — Design of concrete 欧洲规范2 的国家补充混凝土结构计算：超高性能纤维增强混凝土

VIP免费

小气猫 2025-03-21 254 3.59MB 136 页 16星币

Published and distributed by Association Française de Normalisation (AFNOR — French standard institute) — 11, rue Francis de Pressensé —

93571 La Plaine Saint-Denis Cedex — Tel.: + 33 (0)1 41 62 80 00 — Fax: + 33 (0)1 49 17 90 00 — www.afnor.org

FE063075 ISSN 0335-3931

NF P 18-710

16 April 2016

Classification index: P 18-710

French standard

ICS: 91.010.30; 91.080.40

National addition to Eurocode 2 — Design of

concrete structures: specific rules for Ultra-High

Performance Fibre-Reinforced Concrete (UHPFRC)

F : Complément national à l’Eurocode 2 — Calcul des structures en béton :

règles spécifiques pour les Bétons Fibrés à Ultra-Hautes Performances (BFUP)

D : Nationale Ergänzung zu Eurocode 2 — Bemessung von Betonstrukturen:

spezifische Bestimmungen für faserbewehrte Ultrahochleistungsbetone

French standard approved

by decision of the Director General of AFNOR.

Correspondence At the date of publication of this document, there is no international or european

standardization works on the same subject.

Summary This document, which can be considered as a national complement to Eurocode 2,

applies to the design of UHPFRC structures (buildings and civil engineering).

Consequently, this document is concerned with the requirements for resistance,

serviceability, durability and fire resistance of these structures.

Descriptors Technical International Thesaurus: construction, civil engineering, concrete

structures, computation, stresses, limits, materials, mechanical strength,

deformation, reinforcing steels, prestressing steels, durability, stress analysis,

flexing, shear strength, tensile strength, strain, fatigue life, cracking (fracturing),

anchorages, armatures, distance, covering, beams: supports, floors, slabs,

partitions, columns, foundations, verification.

Modifications

Corrections

@Seismicisolation

NF P 18-710

Standards

Standards are designed to serve as a basis in relations between economic, scientific, technical and social

partners.

By nature, application of a standard is voluntary. When stipulated in a contract, it is binding on the parties.

Legislation may require all or part of a standard to become compulsory.

The standard is a document defined by consensus within a standardisation body involving representatives

of all stakeholders. It is submitted for public consultation prior to adoption.

The standard is regularly reviewed to assess its appropriateness over time.

Any standard is considered to be effective as from the date presented on the first page.

Understanding standards

The reader's attention is drawn to the following points:

Only the verbal form shall is used to express one or more requirements that shall be satisfied in order to

comply with this document. Such requirements may be contained in the body of the standard or in a so-called

"normative" annex. For test methods, the use of the imperative corresponds to a requirement.

Expressions involving the verbal form should are used to express a possibility that, while preferred, is not

actually necessary in order to comply with this document. The verbal form may is used to express practical,

but not mandatory advice or suggestions, or permission.

Furthermore, this document may provide additional information aimed at making certain elements easier to

understand or use, or at clarifying how such elements are applied, but without actually defining a requirement.

These elements are presented as notes or informative annexes.

Standardisation commission

Acting within a given field of activity, a standardisation commission features the necessary expertise for

preparing French standards and defining France's positions in European and international draft standards.

The commission may also prepare experimental standards and technical reports.

If you would like to provide feedback on this document, make suggested changes or take part in the

document's revision, write to "norminfo@afnor.org".

The composition of the standardisation commission that prepared this document is provided below. If experts

are representing a body other than the body to which they habitually belong, this information is presented

using the following convention: body of membership (body represented).

@Seismicisolation

NF P 18-710

Design of structures BNTRA CN EC2

Members of the standardisation committee

Chair: Mr CORTADE

Secretariat: Mr GENEREUX — CEREMA

Mr ABOURI EDF SEPTEN

Mr ALEXANDRE BUREAU VERITAS

Mr ASHTARI CONSULTANT

Mr BEGUIN CTICM

Mr BERLOT CEREMA — BNTRA

Mr BERNARDI LAFARGE

Mr BOUCHON MEDDE – DGITM

Mr BOUTAHIR BNTEC

Ms BUCHIN-ROULIE FREYSSINET INTERNATIONAL

Mr BURY UBC INGENIERIE

Mr CAILLEAU AFNOR

Mr CALGARO CONSULTANT

Mr CAUSSE VINCI

Mr CHENAF CSTB

Mr COIN EGF.BTP

Mr COLINA ATHIL

Mr CORTADE CONSULTANT

Mr COYERE EIFFAGE

Mr CRETON BN ACIER

Mr DAOUDI APAVE

Mr DECHEFDEBIEN LB7 GROUPE LESAGE – FIB

Mr DIAS DIRIF

Mr DOMMANGET ITC

Mr DOUROUX RATP

Ms FALEYEUX CERIB

Mr FOURE CONSULTANT

Mr GALLITRE EDF SEPTEN

Mr GERBINO GROUPE VIGIER

Mr GHISOLI CEREMA — BNTRA

Mr GRENIER CONSULTANT

Mr GUIRAUD CIMBETON

Mr HENRI BONNA SABLA

Mr HENRIQUES CSTB

Mr HORVATH CIMBETON

Mr IMBERTY RAZEL-BEC

Mr KNOSP BUREAU VERITAS

Mr LACOMBE CEREMA

Mr LACROIX CONSULTANT

Ms LARQUETOUX BUREAU VERITAS

Mr LENOIR SECOA

Mr LOZACH INCET

Mr MARCHAND IFSTTAR

Mr MASSEROT EIFFAGE GENIE CIVIL

Mr MELLIER FREYSSINET INTERNATIONAL

Mr MONFRONT CERIB

@Seismicisolation

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #混凝土 #增强 #结构

摘要：

法国标准 NF P 18-710-2016 是针对超高性能纤维增强混凝土（UHPC）的国家补充规范，作为欧洲规范2（Eurocode 2）在法国体系下的延伸，专门提供 UHPC 混凝土结构计算的设计原则与方法。该标准适用于桥梁、高层建筑、市政工程及特殊构件等采用超高性能纤维增强混凝土的工程场景，涵盖了材料性能参数、极限状态设计、纤维效应计算、构件的抗弯抗剪承载力分析以及耐久性指标等技术要求。作为 Eurocode 2 的国家附录，NF P 18-710-2016 补充了传统混凝土规范中未涉及的

展开>> 收起<<

法国标准 NF P 18-710-2016 UHPC National addition to Eurocode 2 — Design of concrete 欧洲规范2 的国家补充混凝土结构计算：超高性能纤维增强混凝土.pdf

共136页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

法国标准 NF P 18-710-2016 UHPC National addition to Eurocode 2 — Design of concrete 欧洲规范2 的国家补充混凝土结构计算：超高性能纤维增强混凝土

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

法国标准 NF P 18-710-2016 UHPC National addition to Eurocode 2 — Design of concrete 欧洲规范2 的国家补充 混凝土结构计算：超高性能纤维增强混凝土

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

法国标准 NF P 18-710-2016 UHPC National addition to Eurocode 2 — Design of concrete 欧洲规范2 的国家补充混凝土结构计算：超高性能纤维增强混凝土