BS EN ISO 3506-3-2025 紧固件-耐腐蚀不锈钢紧固件的机械性能第3部分：特定等级和硬度级别的紧定螺钉（及类似不受拉伸应力的紧固件）

VIP专免
老杨树 2025-04-02 68 1.06MB 22 页 22星币
侵权投诉
BSI Standards Publication
Fasteners — Mechanical properties of
corrosion resistant stainless steel fasteners
Part 3: Set screws (and similar fasteners not under tensile
stress) with specified grades and hardness classes
BS EN ISO 3506‑3:2025
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN ISO 3506-3
January 2025
ICS 21.060.10 Supersedes EN ISO 3506-3:2009
English Version
Fasteners - Mechanical properties of corrosion resistant
stainless steel fasteners - Part 3: Set screws (and similar
fasteners not under tensile stress) with specified grades
and hardness classes (ISO 3506-3:2025)
Fixations - Caractéristiques mécaniques des fixations
en acier inoxydable résistant à la corrosion - Partie 3:
Vis sans tête (et fixations similaires non soumises à des
contraintes de traction) de grades et classes de dureté
spécifiées (ISO 3506-3:2025)
Mechanische Verbindungselemente - Eigenschaften
von Verbindungselementen aus nichtrostenden
Stählen - Teil 3: Gewindestifte und ähnliche nicht auf
Zug beanspruchte Verbindungselemente (ISO 3506-
3:2025)
This European Standard was approved by CEN on 19 January 2025.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN ISO 3506-3:2025 E
National foreword
This British Standard is the UK implementation of EN ISO 3506‑3:2025.
It is identical to ISO 3506‑3:2025. It supersedes BS EN ISO 3506‑3:2009,
which is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee FME/9, Fasteners.
A list of organizations represented on this committee can be obtained on
request to its committee manager.
Contractual and legal considerations
This publication has been prepared in good faith, however no
representation, warranty, assurance or undertaking (express or
implied) is or will be made, and no responsibility or liability is or will be
accepted by BSI in relation to the adequacy, accuracy, completeness or
reasonableness of this publication. All and any such responsibility and
liability is expressly disclaimed to the full extent permitted by the law.
This publication is provided as is, and is to be used at the
recipient’s own risk.
The recipient is advised to consider seeking professional guidance with
respect to its use of this publication.
This publication is not intended to constitute a contract. Users are
responsible for its correct application.
© The British Standards Institution 2025
Published by BSI Standards Limited 2025
ISBN 978 0 539 19977 2
ICS 21.060.10
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 January 2025.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN ISO 3506‑3:2025
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN ISO 3506-3
January 2025
ICS 21.060.10 Supersedes EN ISO 3506-3:2009
English Version
Fasteners - Mechanical properties of corrosion resistant
stainless steel fasteners - Part 3: Set screws (and similar
fasteners not under tensile stress) with specified grades
and hardness classes (ISO 3506-3:2025)
Fixations - Caractéristiques mécaniques des fixations
en acier inoxydable résistant à la corrosion - Partie 3:
Vis sans tête (et fixations similaires non soumises à des
contraintes de traction) de grades et classes de dureté
spécifiées (ISO 3506-3:2025)
Mechanische Verbindungselemente - Eigenschaften
von Verbindungselementen aus nichtrostenden
Stählen - Teil 3: Gewindestifte und ähnliche nicht auf
Zug beanspruchte Verbindungselemente (ISO 3506-
3:2025)
This European Standard was approved by CEN on 19 January 2025.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN ISO 3506-3:2025 E
BS EN ISO 3506‑3:2025

标签： #ISO #腐蚀 #不锈钢

摘要：

本文档全面解读了最新发布的BS EN ISO 3506-3-2025标准，该标准专门针对耐腐蚀不锈钢紧固件中的紧定螺钉及类似不受拉伸应力的紧固件，详细规定了其特定等级与硬度级别的机械性能要求。作为ISO 3506系列的重要组成部分，本标准替代了旧版，为航空航天、海洋工程、化工设备及医疗器械等严苛腐蚀环境下的紧固件选型与质量控制提供了权威依据。内容涵盖了对奥氏体、马氏体、铁素体及沉淀硬化不锈钢材料制成的紧定螺钉（包括定位螺钉、无头螺钉和类似产品）的硬度、扭矩强度和剪切强度等关键参数。通过明确不同硬

展开>> 收起<<
BS EN ISO 3506-3-2025 紧固件-耐腐蚀不锈钢紧固件的机械性能第3部分：特定等级和硬度级别的紧定螺钉（及类似不受拉伸应力的紧固件）.pdf

共22页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：老杨树 分类：国际标准 价格：22星币 属性：22 页 大小：1.06MB 格式：PDF 时间：2025-04-02

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 22
评分 收藏
分享
立即下载 VIP免费下载
客服
关注