澳大利亚标准 AS 1418.3-2024 起重机、提升机和绞车 第3部分：桥式起重机、龙门起重机、门式起重机（包括集装箱起重机）和悬臂起重机

VIP专免
标准小能手 2025-05-09 87 1.84MB 28 页 20星币
侵权投诉
Cranes, hoists and winches
Part 3: Bridge, gantry, portal (including container cranes) and jib cranes
AS 1418.3:2024
AS 1418.3:2024
ISBN 978 1 76139 797 4
This Australian Standard ® was prepared by ME-005, Cranes. It was approved on behalf
of Standards Australia’s Standards Development and Accreditation Committee on 13
August 2024.
This Standard was published on 23 August 2024.
The following are represented on Committee ME-005:
Australian Chamber of Commerce and Industry
Australian Industry Group
Australian Institute for Non-Destructive Testing
Better Regulation Division (Fair Trading, SafeWork NSW, TestSafe)
Bureau of Steel Manufacturers of Australia
Department of Regional NSW
Elevating Work Platform Association of Australia
Engineers Australia
National Heavy Vehicle Regulator
Office of Industrial Relations (QLD)
The Crane Industry Council of Australia
Transport for NSW
Victorian WorkCover Authority (WorkSafe Victoria)
WorkSafe Division — Department of Mines, Industry Regulation and
Safety (DMIRS) WA
This Standard was issued in draft form for comment as DR AS 1418.3:2023.
Keeping Standards up-to-date
Ensure you have the latest versions of our publications and keep up-to-date about
Amendments, Rulings, Withdrawals, and new projects by visiting:
www.standards.org.au
Cranes, hoists and winches
Part 3: Bridge, gantry, portal (including container
cranes) and jib cranes
AS 1418.3:2024
© Standards Australia Limited 2024
All rights are reserved. No part of this work may be reproduced or copied in any
form or by any means, electronic or mechanical, including photocopying, without the
written permission of the publisher, unless otherwise permitted under the Copyright
Act 1968 (Cth).
Originated as AS CB2—1939.
Revised and redesignated as AS 1418.3—1977.
Previous edition AS 1418.3:1997.
Sixth edition AS 1418.3:2024.

标签： #起重机

摘要：

本页面提供澳大利亚标准 AS 1418.3-2024 的完整解读，该标准专注于起重机、提升机和绞车的安全设计与操作要求，特别涵盖桥式起重机、龙门起重机、门式起重机（包括集装箱起重机）以及悬臂起重机。作为最新修订版本，该标准替代了旧版 AS 1418.3，旨在提升工业起重设备的可靠性、操作人员安全以及合规性。无论您是设备制造商、工程设计师、安全管理人员还是起重作业承包商，了解 AS 1418.3-2024 的最新条款将帮助您规避法律风险、减少事故隐患，并确保设备符合澳大利亚严格的安全法规。本内容详

展开>> 收起<<
澳大利亚标准 AS 1418.3-2024 起重机、提升机和绞车 第3部分：桥式起重机、龙门起重机、门式起重机（包括集装箱起重机）和悬臂起重机.pdf

共28页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：标准小能手 分类：国际标准 价格：20星币 属性：28 页 大小：1.84MB 格式：PDF 时间：2025-05-09

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 28
评分 收藏
分享
立即下载 VIP免费下载
客服
关注