SAE ARP1631A-2024 制造高强度钢件的制造顺序300M或4340改性低合金钢270,000 psi（1860 MPa）拉伸强度和更高

VIP专享
史蒂文 2025-05-16 12 4.21MB 12 页 20星币
侵权投诉
__________________________________________________________________________________________________________________________________________
SAE Executive Standards Committee Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is
entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”
SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and
suggestions.
Copyright © 2024 SAE International
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, or used for text and data mining, AI training, or similar technologies, without the prior written permission of SAE.
TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)
Tel: +1 724-776-4970 (outside USA)
Fax: 724-776-0790
Email: CustomerService@sae.org
SAE WEB ADDRESS: http://www.sae.org
For more information on this standard, visit
https://www.sae.org/standards/content/ARP1631A/
AEROSPACE
RECOMMENDED PRACTICE
ARP1631™
REV. A
Issued 1984-10
Revised 2007-11
Reaffirmed 2024-06
Superseding ARP1631
Manufacturing Sequence for Fabrication of High-Strength Steel Parts
300M or 4340 Modified Low-Alloy Steels
270,000 psi (1860 MPa) Tensile Strength and Higher
RATIONALE
ARP1631A has been reaffirmed to comply with the SAE Five-Year Review policy.
SAE INTERNATIONAL ARP1631™A Page 2 of 12
SAE INTERNATIONAL ARP1631™A Page 3 of 12

标签： #合金钢 #低合金 #拉伸

摘要：

本页面详细介绍 SAE ARP1631A-2024 标准规范，该标准聚焦于制造高强度钢件的制造顺序，主要针对300M或4340改性低合金钢，要求达到270,000 psi（1860 MPa）拉伸强度及更高性能。内容涵盖从原材料选择、热处理工艺到最终检验的完整制造流程，旨在指导航空航天及高端工业领域中关键承力部件的生产。通过遵循此规范，制造商可确保钢件在超高强度下的韧性、抗疲劳性和尺寸稳定性，满足严苛的安全与质量要求。标准还强调了过程控制与工艺参数优化，以最大限度减少氢脆等风险，适用于起落架、发动

展开>> 收起<<
SAE ARP1631A-2024 制造高强度钢件的制造顺序300M或4340改性低合金钢270,000 psi（1860 MPa）拉伸强度和更高.pdf

共12页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：史蒂文 分类：国外协会 价格：20星币 属性：12 页 大小：4.21MB 格式：PDF 时间：2025-05-16

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 12
评分 收藏
分享
立即下载
客服
关注