BS EN ISO 27548-2024 塑料增材制造-环境、健康与安全-桌面材料挤出式 3D 打印机颗粒物及化学物质排放速率的测定试验方法

VIP专免
乔大爷开音响 2025-06-05 10 2.85MB 34 页 16星币
侵权投诉
BSI Standards Publication
Additive manufacturing of plastics — Environment,
health, and safety — Test method for determination
of particle and chemical emission rates from
desktop material extrusion 3D printer
BS EN ISO 27548:2024
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN ISO 27548
July 2024
ICS 13.040.30; 13.100; 25.030
English Version
Additive manufacturing of plastics - Environment, health,
and safety - Test method for determination of particle and
chemical emission rates from desktop material extrusion
3D printer (ISO 27548:2024)
Fabrication additive de plastiques - Environnement,
santé et sécurité - Méthode d'essai pour la
détermination des taux d'émission de particules et de
produits chimiques des imprimantes 3D de bureau par
extrusion de matériau (ISO 27548:2024)
Additive Fertigung von Kunststoffen - Umwelt,
Gesundheit und Sicherheit - Prüfverfahren zur
Bestimmung der Partikelemissionsrate und der
chemischen Emissionsrate von
materialextrusionsbasierten Desktop-3D-Druckern
(ISO 27548:2024)
This European Standard was approved by CEN on 6 July 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN ISO 27548:2024 E
National foreword
This British Standard is the UK implementation of EN ISO 27548:2024. It
is identical to ISO 27548:2024.
The UK participation in its preparation was entrusted to Technical
Committee AMT/8, Additive manufacturing.
A list of organizations represented on this committee can be obtained on
request to its committee manager.
Contractual and legal considerations
This publication has been prepared in good faith, however no
representation, warranty, assurance or undertaking (express or
implied) is or will be made, and no responsibility or liability is or will be
accepted by BSI in relation to the adequacy, accuracy, completeness or
reasonableness of this publication. All and any such responsibility and
liability is expressly disclaimed to the full extent permitted by the law.
This publication is provided as is, and is to be used at the
recipient’s own risk.
The recipient is advised to consider seeking professional guidance with
respect to its use of this publication.
This publication is not intended to constitute a contract. Users are
responsible for its correct application.
© The British Standards Institution 2024
Published by BSI Standards Limited 2024
ISBN 978 0 539 22736 9
ICS 13.040.30; 13.100; 25.030
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 July 2024.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN ISO 27548:2024
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN ISO 27548
July 2024
ICS 13.040.30; 13.100; 25.030
English Version
Additive manufacturing of plastics - Environment, health,
and safety - Test method for determination of particle and
chemical emission rates from desktop material extrusion
3D printer (ISO 27548:2024)
Fabrication additive de plastiques - Environnement,
santé et sécurité - Méthode d'essai pour la
détermination des taux d'émission de particules et de
produits chimiques des imprimantes 3D de bureau par
extrusion de matériau (ISO 27548:2024)
Additive Fertigung von Kunststoffen - Umwelt,
Gesundheit und Sicherheit - Prüfverfahren zur
Bestimmung der Partikelemissionsrate und der
chemischen Emissionsrate von
materialextrusionsbasierten Desktop-3D-Druckern
(ISO 27548:2024)
This European Standard was approved by CEN on 6 July 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN ISO 27548:2024 E
BS EN ISO 27548:2024

标签： #ISO #塑料 #试验方法

摘要：

BS EN ISO 27548-2024 是一项国际标准，专门针对塑料增材制造（即3D打印）过程中，桌面材料挤出式打印机所产生的环境、健康与安全影响。该标准提供了测定颗粒物及化学物质排放速率的标准化试验方法，旨在帮助制造商、实验室和用户准确评估桌面级3D打印机在工作时释放的微细颗粒与挥发性有机化合物浓度。本标准适用于基于熔融沉积成型（FDM）技术的设备，规范了测试环境、样品制备、采样与分析流程，从而确保排放数据的一致性与可比性。通过遵循BS EN ISO 27548-2024，企业能够更科学地优

展开>> 收起<<
BS EN ISO 27548-2024 塑料增材制造-环境、健康与安全-桌面材料挤出式 3D 打印机颗粒物及化学物质排放速率的测定试验方法.pdf

共34页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：乔大爷开音响 分类：国际标准 价格：16星币 属性：34 页 大小：2.85MB 格式：PDF 时间：2025-06-05

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 34
评分 收藏
分享
立即下载 VIP免费下载
客服
关注