BS EN ISO ASTM 52909-2024 金属增材制造-成品件性能-金属制件力学性能的方向与位置相关性

VIP免费
乔大爷开音响 2025-06-06 15 1.99MB 22 页 12星币
侵权投诉
BSI Standards Publication
Additive manufacturing of metals — Finished part
properties — Orientation and location dependence
of mechanical properties for metal parts
BS EN ISO/ASTM 52909:2024
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN ISO/ASTM 52909
March 2024
ICS 25.030 Supersedes EN ISO/ASTM 52909:2022
English Version
Additive manufacturing of metals - Finished part
properties - Orientation and location dependence of
mechanical properties for metal parts (ISO/ASTM
52909:2024)
Fabrication additive de métaux - Propriétés des pièces
finies - Dépendance de l'orientation et de
l'emplacement sur les propriétés mécaniques pour les
pièces métalliques (ISO/ASTM 52909:2024)
Additive Fertigung von Metallen - Eigenschaften von
Fertigteilen - Ausrichtungs- und Lageabhängigkeit der
mechanischen Eigenschaften bei Metall-Bauteilen
(ISO/ASTM 52909:2024)
This European Standard was approved by CEN on 1 March 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN ISO/ASTM 52909:2024 E
National foreword
This British Standard is the UK implementation of
EN ISO/ASTM 52909:2024. It is identical to ISO/ASTM 52909:2024. It
supersedes BS EN ISO/ASTM 52909:2022, which is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee AMT/8, Additive manufacturing.
A list of organizations represented on this committee can be obtained on
request to its committee manager.
Contractual and legal considerations
This publication has been prepared in good faith, however no
representation, warranty, assurance or undertaking (express or
implied) is or will be made, and no responsibility or liability is or will be
accepted by BSI in relation to the adequacy, accuracy, completeness or
reasonableness of this publication. All and any such responsibility and
liability is expressly disclaimed to the full extent permitted by the law.
This publication is provided as is, and is to be used at the
recipient’s own risk.
The recipient is advised to consider seeking professional guidance with
respect to its use of this publication.
This publication is not intended to constitute a contract. Users are
responsible for its correct application.
© The British Standards Institution 2024
Published by BSI Standards Limited 2024
ISBN 978 0 539 29558 0
ICS 25.030
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 March 2024.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN ISO/ASTM 52909:2024
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN ISO/ASTM 52909
March 2024
ICS 25.030 Supersedes EN ISO/ASTM 52909:2022
English Version
Additive manufacturing of metals - Finished part
properties - Orientation and location dependence of
mechanical properties for metal parts (ISO/ASTM
52909:2024)
Fabrication additive de métaux - Propriétés des pièces
finies - Dépendance de l'orientation et de
l'emplacement sur les propriétés mécaniques pour les
pièces métalliques (ISO/ASTM 52909:2024)
Additive Fertigung von Metallen - Eigenschaften von
Fertigteilen - Ausrichtungs- und Lageabhängigkeit der
mechanischen Eigenschaften bei Metall-Bauteilen
(ISO/ASTM 52909:2024)
This European Standard was approved by CEN on 1 March 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN ISO/ASTM 52909:2024 E
BS EN ISO/ASTM 52909:2024

标签： #ISO #金属 #制造

摘要：

本页提供关于BS EN ISO ASTM 52909-2024标准的最新权威解读。该标准全称为“金属增材制造-成品件性能-金属制件力学性能的方向与位置相关性”，主要针对通过增材制造技术（如激光粉末床熔融、电子束熔化等）生产的金属成品件，系统规定了测试其力学性能时需要考虑的方向效应（各向异性）与位置差异。内容涵盖典型的拉伸、疲劳、硬度等性能在不同构建方向（如X、Y、Z轴）及零件不同区域（如边缘与中心）的评估方法，适用于航空航天、医疗器械、汽车等对金属增材制件质量一致性要求较高的领域。理解该标准有助

展开>> 收起<<
BS EN ISO ASTM 52909-2024 金属增材制造-成品件性能-金属制件力学性能的方向与位置相关性.pdf

共22页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：乔大爷开音响 分类：国际标准 价格：12星币 属性：22 页 大小：1.99MB 格式：PDF 时间：2025-06-06

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 22
评分 收藏
分享
立即下载 VIP免费下载
客服
关注