MIL-PRF-85582E

VIP专免

standardshare 2025-06-15 21 94.26KB 18 页 14星币

侵权投诉

NOT MEASUREMENT

SENSITIVE

MIL-PRF-85582E

16 October 2012

SUPERSEDING

MIL-PRF-85582D

09 May 2002

PERFORMANCE SPECIFICATION

PRIMER COATINGS: EPOXY, WATERBORNE

This specification is approved for use by all Departments and Agencies of the Department

of Defense.

1. SCOPE

1.1 Scope. This specification covers the requirements for corrosion inhibiting, chemical

and solvent resistant, waterborne, epoxy primer coatings that have a maximum volatile organic

compound (VOC) content of 340 grams per liter (g/L) (2.8 pounds per gallon [lb/gal]) as

supplied by the manufacturer.

1.2 Classification. The primer coatings will be of the following types and classes, as

specified (see 6.2):

1.2.1 Types. The types of primer coatings are as follows:

 Type I - Standard pigments

 Type II - Low infrared reflective pigments

1.2.2 Classes. The classes of primer coatings are as follows:

 Class C1 - Barium chromate based corrosion inhibitors

 Class C2 - Strontium chromate based corrosion inhibitors

 Class N - Non-chromate based corrosion inhibitors

Comments, suggestions, or questions on this document should be addressed to: Commander,

Naval Air Warfare Center Aircraft Division, Code 4L8000B120-3, Highway 547, Lakehurst, NJ

08733-5100 or emailed to michael.sikora@navy.mil. Since contact information can change, you

may want to verify the currency of this address information using the ASSIST Online database at

https://assist.dla.mil.

AMSC N/A FSC 8010

Provided by IHS

Licensed by www.sepana.ir

Sale only by www.sepana.ir, 05/21/2014 23:39:05 MDT

No reproduction or networking permitted without license from IHS

--`,`,``,`,`,``,,`,```,,,`,,`,,`-`-`,,`,,`,`,,`---

daneshlink.com

MIL-PRF-85582E

1.3 Part or Identifying Number (PIN). The PIN to be used for primer coatings acquired to

this specification is created as follows:

M85582 - X -XX - XXXX

Specification identifier Type designator

1 = Type I

2 = Type II

Class designator

(C1, C2, or N) Kit size designator

(see 1.3.1)

1.3.1 Kit size. The primer coatings covered by this specification should be purchased by

volume, the unit being a kit containing two components. The kit component sizes need not be of

the same size. When this part numbering system is used, the kit size is to be identified as

follows:

Kit size 1/ Kit size designator

Less than one pint 2/

4-pint (0.47-liter) 004P

4-quart (0.95-liter) 004Q

4-gallon (3.79-liter) 004G

1/ The kit size and its designator may be modified for ease of procurement and is not otherwise

limited.

2/ Designators for less than pint size kits (small touch up kits) are expressed in cubic

centimeters (cc) and designated by “C.” Example: A type I, class C1, 50 cc kit is designated

M85582-1-C1-050C.

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3 and 4 of this

specification. This section does not include documents cited in other sections of this

specification or recommended for additional information or as examples. While every effort has

been made to ensure the completeness of this list, document users are cautioned that they must

meet all specified requirements of documents cited in sections 3 and 4 of this specification,

whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications and standards. The following specifications and standards form a part

of this document to the extent specified herein. Unless otherwise specified, the issues of these

documents are those cited in the solicitation or contract.

FEDERAL SPECIFICATION

TT-R-2918 - Remover, Paint, No Hazardous Air Pollutants (HAPs).

Provided by IHS

Licensed by www.sepana.ir

Sale only by www.sepana.ir, 05/21/2014 23:39:05 MDT

No reproduction or networking permitted without license from IHS

--`,`,``,`,`,``,,`,```,,,`,,`,,`-`-`,,`,,`,`,,`---

daneshlink.com

MIL-PRF-85582E

FEDERAL STANDARDS

FED-STD-141 - Paint, Varnish, Lacquer and Related Materials: Methods of

Inspection, Sampling and Testing.

FED-STD-595 - Colors Used in Government Procurement

Color numbers 17925, 36375.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-DTL-5541 - Chemical Conversion Coatings for Aluminum and

Aluminum Alloys.

MIL-C-8514 - Coating Compound, Metal Pretreatment, Resin-Acid.

MIL-A-8625 - Anodic Coatings for Aluminum and Aluminum Alloys

MIL-PRF-23699 - Lubricating Oil, Aircraft Turbine Engine, Synthetic Base,

NATO Code Number 0-156.

MIL-R-81294 - Remover, Paint, Epoxy, Polysulfide, and Polyurethane

Systems.

MIL-PRF-83282 - Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base,

Metric, NATO Code Number H-537.

MIL-PRF-85285 - Coating: Polyurethane, Aircraft and Support Equipment.

(Copies of these documents are available online at https://assist.dla.mil/quicksearch/

or https://assist.dla.mil or from the Standardization Document Order Desk, 700 Robbins

Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.3 Non-Government publications. The following documents form a part of this document

to the extent specified herein. Unless otherwise specified, the issues of these documents are

those cited in the solicitation or contract.

ASTM INTERNATIONAL

ASTM B117 - Standard Method of Salt Spray (Fog) Testing.

ASTM D823 - Standard Practices for Producing Films of Uniform

Thickness of Paint, Varnish, and Related Products on Test

Panels.

ASTM D1193 - Standard Specification for Reagent Water.

ASTM D1200 - Standard Test Method for Viscosity by Ford Viscosity Cup

ASTM D1210 - Standard Test Method for Fineness of Dispersion of Pigment-

Vehicle Systems by Hegman-Type Gage.

ASTM D1296 - Standard Test Method for Odor of Volatile Solvents and

Diluents.

ASTM D1649 - Standard Specification for Strontium Chromate Pigment.

ASTM D1849 - Standard Test Method for Package Stability of Paint.

ASTM D2243 - Standard Test Method for Freeze-Thaw Resistance of Water-

Borne Coatings.

Provided by IHS

Licensed by www.sepana.ir

Sale only by www.sepana.ir, 05/21/2014 23:39:05 MDT

No reproduction or networking permitted without license from IHS

--`,`,``,`,`,``,,`,```,,,`,,`,,`-`-`,,`,,`,`,,`---

daneshlink.com

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

MIL-PRF-85582E 是美国军用性能规范，适用于高性能印刷电路板组件的保形涂层材料，旨在为电子设备提供长期可靠的防潮、防化学污染及耐热冲击保护。该标准替代了 MIL-I-85582 版本，重点提升了涂层的可修复性、附着力以及环保合规性，通常分为 Type UR（可打磨修复）和 Type SR（可溶剂去除）两类。符合 MIL-PRF-85582E 的涂层广泛应用于航空航天、国防及高可靠性工业电子中，确保组件在严苛环境下的电气绝缘与抗机械应力性能。选择该规格的无溶剂或低挥发性有机化合物配方，

展开>> 收起<<

MIL-PRF-85582E.pdf

共18页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

MIL-PRF-85582E

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: