MIL-STD-31000A

VIP专免

standardshare 2025-06-15 70 6.4MB 166 页 18星币

侵权投诉

NOT MEASUREMENT

SENSITIVE

MIL-STD-31000A

26 February 2013

SUPERSEDING

MIL-STD-31000

05 November 2009

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

TECHNICAL DATA PACKAGES

This standard is approved for use by all Departments and Agencies of the Department of Defense.

1. SCOPE.

1.1 This standard provides requirements for the deliverable data products associated with a technical data

package (TDP) and its related TDP data management products. A TDP contains elements, is described by

a level and type, and may have associated metadata and supplementary technical data. TDP contains a

sub-set of product data and product data is a sub-set of technical data. These relationships are shown in

the hierarchical breakdown of data in Figure 1.

Comments, suggestions, or questions on this document should be addressed to: Commander, US

Army ARDEC, ATTN: RDAR-QES-E, Picatinny Arsenal, New Jersey 07806-5000 or email to

usarmy.picatinny.ardec.list.ardec-stdzn-branch@mail.mil. Since contact information can

change, you may want to verify the currency of this address information using the ASSIST

online database at https://assist.dla.mil.

AMSC 9341 AREA SESS

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

Provided by IHS

Licensed by www.sepana.ir

Sale only by www.sepana.ir, 05/21/2014 22:51:39 MDT

No reproduction or networking permitted without license from IHS

--`,`,``,`,`,``,,`,```,,,`,,`,,`-`-`,,`,,`,`,,`---

daneshlink.com

MIL-STD-31000A

FIGURE 1. TDP relationships.

2. APPLICABLE DOCUMENTS.

2.1 General. The documents listed in this section are specified in sections 3, 4 and 5 of this standard.

This section does not include documents listed in other sections or recommended for additional

information or as examples.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and

handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the

issues of these documents are those cited in the solicitation or contract.

Provided by IHS

Licensed by www.sepana.ir

Sale only by www.sepana.ir, 05/21/2014 22:51:39 MDT

No reproduction or networking permitted without license from IHS

--`,`,``,`,`,``,,`,```,,,`,,`,,`-`-`,,`,,`,`,,`---

daneshlink.com

MIL-STD-31000A

FEDERAL STANDARDS.

FED-STD-376 Preferred Metric Units for General Use by the Federal Government

DEPARTMENT OF DEFENSE STANDARDS.

MIL-STD-961 Defense and Program-unique Specifications Format and Content

MIL-STD-963 Data Item Descriptions (DID)

MIL-STD-2073-1 Standard Practice for Military Packaging

DOD-STD-2101 Classification of Characteristics

(Copies of these documents are available online at http://quicksearch.dla.mil or from the

Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-

5094.)

2.2.2 Other Government documents and publications. The following other Government documents

and publications form a part of this document to the extent specified herein. Unless otherwise specified,

the issues are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE MANUALS

DoD Manual 4100.39M Federal Logistics Information System (FLIS) Procedures

Manual

DoD Manual 5220.22-M Department of Defense Industrial Security Manual for

Safeguarding Classified Information.

DoD Directive 5230.24 Distribution Statements on Technical Documents

DoD Directive 5230.25 Withholding of Unclassified Technical Data From Public

Disclosure

DoD 5010.12-M Procedures for the Acquisition of Technical Data

DFARS Part 211 Defense Federal Acquisition Regulation Supplement for Describing

Agency Needs

DFARS Part 227 Defense Federal Acquisition Regulation Supplement for

Patents, Data and Copyrights

DFARS Part 252 Defense Federal Acquisition Regulation Supplement for

Solicitations, Provisions and Contract Clauses

FAR 11.001 Federal Acquisition Regulation, Describing Agency Needs,

Definitions

Federal Cataloging Commercial and Government Entity (CAGE)

Handbook H4/H8 Codes

Provided by IHS

Licensed by www.sepana.ir

Sale only by www.sepana.ir, 05/21/2014 22:51:39 MDT

No reproduction or networking permitted without license from IHS

--`,`,``,`,`,``,,`,```,,,`,,`,,`-`-`,,`,,`,`,,`---

daneshlink.com

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

MIL-STD-31000A 是一项美国军用标准，全称为《技术数据包开发与交付标准》，主要用于规范军用系统、设备及零部件的技术数据包（TDP）的创建、格式、内容和交付流程。该标准替代了之前的版本，强调采用基于模型的工程（MBE）和数据互操作性，确保从设计、制造到维护全生命周期内的技术数据具有一致性、可追溯性和可重用性。通过定义几何模型、工程图纸、技术数据清单及相关支撑文档的要求，MIL-STD-31000A 帮助国防承包商和采购部门减少数据误解、降低集成风险并提高供应链效率。对于从事军品研发、数

展开>> 收起<<

MIL-STD-31000A.pdf

共166页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

MIL-STD-31000A

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: