SAE AS81969-8B-2024 安装和拆卸工具 连接器电触点 类型 I 和 II 2 类 成分 A

VIP专享
史蒂文 2025-07-28 17 946.51KB 8 页 20星币
侵权投诉
AEROSPACE STANDARD
INSTALLING AND REMOVAL TOOLS, CONNECTOR
ELECTRICAL CONTACT, TYPE I & II, CLASS 2,
COMPOSITION A
AS81969™/8
Copyright © 2024 SAE International
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, transmitted, in any form or by any means, electronic, mechanical, photocopying, recording,
or otherwise, or used for text and data mining, AI training, or similar technologies, without the prior written permission of SAE.
TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA)
Fax: 724-776-0790 Email: CustomerService@sae.org SAE WEB ADDRESS: http://www.sae.org
ISSUED 2014-04 REAFFIRMED 2021-08 REVISED 2024-08
THIRD ANGLE PROJECTION
CUSTODIAN: AE-8C2
REV.
B
FEDERAL SUPPLY CLASS
5120
AS81969™/8
SHEET 1 OF 8
REV.
B
PROCUREMENT SPECIFICATION: AS81969
SAE Executive Standards Committee Rules provide that: “ This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is
entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”
SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.
For more information on this standard, visit
https://www.sae.org/standards/content/AS81969/8B
RATIONALE
LIMITED SCOPE REVISION REQUIRED TO CORRECT PIN GAGE DIMENSIONS FOR -05 AND -06 AND ADDRESS
MINOR TECHNICAL CHANGES AS NEEDED.
NOTICE
THE COMPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS
DOCUMENT AND THE LATEST ISSUE OF AS81969.
FIGURE 1 - ANGLE PROBE INSTALLING TOOL CONFIGURATION
(-01, -03, -05, -07, -09, -11, -13, -15, -205, -207, AND -209) (SEE TABLE 1)
AEROSPACE STANDARD
AS81969™/8
SHEET 2 OF 8
REV.
B
INSTALLING AND REMOVAL TOOLS, CONNECTOR
ELECTRICAL CONTACT, TYPE I & II, CLASS 2,
COMPOSITION A
FIGURE 2 - ANGLE PROBE REMOVAL TOOL CONFIGURATION
(-02, -04, -06, -08, -10, -12, -14, -16, -206, -208, AND -210) (SEE TABLE 2)
FIGURE 3 - INLINE PROBE INSTALLING TOOL CONFIGURATION
(-301, -303, -305, -307, -309, -311, -313, AND -315) (SEE TABLE 1)
AEROSPACE STANDARD
AS81969™/8
SHEET 3 OF 8
REV.
B
INSTALLING AND REMOVAL TOOLS, CONNECTOR
ELECTRICAL CONTACT, TYPE I & II, CLASS 2,
COMPOSITION A
FIGURE 4 - INLINE PROBE REMOVAL TOOL CONFIGURATION
(-002-302, - 304, -306, -308, -310, -312, -314, AND -316) (SEE TABLE 2)
DRAWING NOTES (APPLIES TO FIGURES 1, 2, 3, AND 4):
NOTE 1 - WITH PROBES IN THE FREE STATE POSITION, THE PROBES SHALL END-ALIGN WITHIN .005 INCH.
NOTE 2 - WITH PROBE CLOSED AROUND “A” DIAMETER PIN, THE PROBE SHALL ALIGN THEMSELVES WITHIN .001 INCH
THROUGHOUT THE “L” LENGTH AND CLEARANCE BETWEEN PROBE SHALL BE .000 TO .006 INCH FOR THE INSTALLING
TOOL AND .000 TO .002 FOR REMOVAL TOOL FOR THE ENTIRE LENGTH OF THE PROBE. THIS CLEARANCE SHALL BE
CENTRAL TO THE CENTER LINE OF THE “C” DIAMETER WITHIN ±.002 INCH.
NOTE 3 - “B” DIAMETER TOLERANCE SHALL BE ±.001 FOR TIP AND +.010/-.001 FOR BALANCE OF PROBE.

标签： #电触点 #安装

摘要：

SAE AS81969-8B-2024 是航空航天领域用于连接器电触点安装与拆卸的专用工具标准，涵盖类型 I 和类型 II 的 2 类工具，其成分 A 规定了工具材料与制造要求。该标准适用于航空电子、军用及工业连接器中圆形或矩形电触点的安全、高效作业，确保在维护、修理或组装过程中不损坏触点或绝缘体。文档详细定义了工具的尺寸、材质、热处理及测试方法，以保障其与各类标准连接器的兼容性及长期可靠性。对于从事航空航天线束装配、机载设备维修或连接器制造的专业人员，本规范是选购和验证此类工具的关键技术依据，

展开>> 收起<<
SAE AS81969-8B-2024 安装和拆卸工具 连接器电触点 类型 I 和 II 2 类 成分 A.pdf

共8页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：史蒂文 分类：国外协会 价格：20星币 属性：8 页 大小：946.51KB 格式：PDF 时间：2025-07-28

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 8
评分 收藏
分享
立即下载
客服
关注