BS EN 4500-003-2024 航空航天系列 金属材料 材料标准的起草和表示规则 第003部分：耐热合金的具体规则

VIP专享
史蒂文 2025-08-08 14 1.02MB 30 页 20星币
侵权投诉
BSI Standards Publication
Aerospace series — Metallic materials — Rules for
drafting and presentation of material standards

BS EN 4500‑003:2024
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 4500-003
August 2024
ICS 01.120; 49.025.05; 49.025.15 Supersedes EN 4500-003:2012
English Version
Aerospace series - Metallic materials - Rules for drafting
and presentation of material standards - Part 003: Specific
rules for heat resisting alloys
Série aérospatiale - Matériaux métalliques - Règles
pour la rédaction et la présentation des normes de
matériaux - Partie 003 : Règles spécifiques aux alliages
résistant à chaud
Luft- und Raumfahrt - Metallische Werkstoffe - Regeln
für das Erstellen und die Gestaltung von
Werkstoffnormen - Teil 003: Besondere Regeln für
hochwarmfeste Legierungen
This European Standard was approved by CEN on 17 June 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 4500-003:2024 E
National foreword
This British Standard is the UK implementation of EN 4500‑003:2024. It
supersedes BS EN 4500‑003:2012, which is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee ACE/61, Metallic materials for aerospace purposes.
A list of organizations represented on this committee can be obtained on
request to its committee manager.
Contractual and legal considerations
This publication has been prepared in good faith, however no
representation, warranty, assurance or undertaking (express or
implied) is or will be made, and no responsibility or liability is or will be
accepted by BSI in relation to the adequacy, accuracy, completeness or
reasonableness of this publication. All and any such responsibility and
liability is expressly disclaimed to the full extent permitted by the law.
This publication is provided as is, and is to be used at the
recipient’s own risk.
The recipient is advised to consider seeking professional guidance with
respect to its use of this publication.
This publication is not intended to constitute a contract. Users are
responsible for its correct application.
© The British Standards Institution 2024
Published by BSI Standards Limited 2024
ISBN 978 0 539 19736 5
ICS 01.120; 49.025.05; 49.025.15
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 August 2024.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN 4500‑003:2024
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 4500-003
August 2024
ICS 01.120; 49.025.05; 49.025.15 Supersedes EN 4500-003:2012
English Version
Aerospace series - Metallic materials - Rules for drafting
and presentation of material standards - Part 003: Specific
rules for heat resisting alloys
Série aérospatiale - Matériaux métalliques - Règles
pour la rédaction et la présentation des normes de
matériaux - Partie 003 : Règles spécifiques aux alliages
résistant à chaud
Luft- und Raumfahrt - Metallische Werkstoffe - Regeln
für das Erstellen und die Gestaltung von
Werkstoffnormen - Teil 003: Besondere Regeln für
hochwarmfeste Legierungen
This European Standard was approved by CEN on 17 June 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 4500-003:2024 E
BS EN 4500‑003:2024

标签： #金属材料 #合金 #金属

摘要：

本页面提供BS EN 4500-003-2024标准的详细解读，该标准属于航空航天系列金属材料规范，专注于材料标准的起草与表示规则，特别定义了耐热合金在航空航天领域应用中的具体技术要求、分类方法、标识规则及数据表示格式。作为EN 4500系列的第003部分，该标准确保耐热合金材料在高温、高应力环境下的性能一致性与可追溯性，适用于飞机发动机、燃气轮机及热端部件制造商、材料工程师及质量认证人员。通过遵循本规则，可有效规范技术文档编制，减少供应链歧义，提升国际采购与认证效率。如需最新法规动态、替代版本

展开>> 收起<<
BS EN 4500-003-2024 航空航天系列 金属材料 材料标准的起草和表示规则 第003部分：耐热合金的具体规则.pdf

共30页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：史蒂文 分类：国际标准 价格：20星币 属性：30 页 大小：1.02MB 格式：PDF 时间：2025-08-08

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 30
评分 收藏
分享
立即下载
客服
关注