ANSI AWWA C900-22 聚氯乙烯（PVC）压力管道和预制配件，4英寸至60英寸（100毫米至1500毫米）范围，符合ANSIAWWA C900-22（ANSI AWWA C900-16修订版）标准 2022

VIP专享

那山那人那狗 2025-10-11 33 1.52MB 52 页 18星币

侵权投诉

Since 1881

Polyvinyl Chloride

(PVC) Pressure Pipe and

Fabricated Fittings, 4 In.

Through 60In. (100 mm

Through 1,500 mm)

ANSI/AWWA C900-22

(Revision of ANSI/AWWA C900-16)

(ƪHFWLYHGDWH2FW

First edition approved by Board of Directors June 8, 1975.

This edition approved June 10, 2022.

Approved by American National Standards Institute May 23, 2022.

AWWA Standard

This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards

describe minimum requirements and do not contain all of the engineering and administrative information normally

contained in specifications. The AWWA standards usually contain options that must be evaluated by the user of the

standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA publication

of a standard does not constitute endorsement of any product or product type, nor does AWWA test, certify, or approve

any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence

over or displace any applicable law, regulation, or codes of any governmental authority. AWWA standards are intended

to represent a consensus of the water industry that the product described will provide satisfactory service. When AWWA

revises or withdraws this standard, an official notice of action will be placed in the Official Notice section of Journal AWWA.

The action becomes effective on the first day of the month following the month of Journal AWWA publication of the official

notice.

American National Standard

An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An

American National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The

existence of an American National Standard does not in any respect preclude anyone, whether that person has approved

the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not

conforming to the standard. American National Standards are subject to periodic review, and users are cautioned to obtain

the latest editions. Producers of goods made in conformity with an American National Standard are encouraged to state

on their own responsibility in advertising and promotional materials or on tags or labels that the goods are produced in

conformity with particular American National Standards.

CAUTION NOTICE: The American National Standards Institute (ANSI) approval date on the front cover of this standard indicates

completion of the ANSI approval process. This American National Standard may be revised or withdrawn at any time.

ANSI procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from

the date of ANSI approval. Purchasers of American National Standards may receive current information on all standards

by calling or writing the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036;

(212) 642-4900, or e-mailing info@ansi.org.

Ζ6%1SULQWɅ Ζ6%1HOHFWURQLFɅ

 '2ΖɅKWWSG[GRLRUJ$::$&

electronic or mechanical, including scanning, recording, or any information or retrieval system. Reproduction and

commercial use of this material is prohibited, except with written permission from the publisher. Please send any

requests or questions to permissions@awwa.org.

Printed in USA

reproduced or transmitted in any form or by any means,

electronic or mechanical, including scanning, recording, or any

information or retrieval system. Reproduction and commercial

use of this material is prohibited, except with written permission

from the publisher. Please send any requests or questions to

permissions@awwa.org.

iii

Committee Personnel

The C900 Standard Subcommittee that developed this standard had the following personnel at

the time of approval:

Robert Walker, Chair

L.M. Bowles, Bureau of Reclamation, Denver, Colo.

B. Clark, JM Manufacturing Co. Inc., DBA JM Eagle, Los Angeles, Calif.

D.L. Eckstein, EBAA Iron Sales Inc., Williamston, S.C.

W. Fassler, Uni-Bell PVC Pipe Association, Ripon, Calif.

S. Ferry, PSILab Inc., Longmont, Colo.

C.A. Fisher, Star Pipe Products, Houston, Tex.

M. Glasgow, North American Pipe Corporation, Ashland City, Tenn.

J.F. Houle, Houle Plastic Pipe Consulting, Livingston, Tex.

J. Hrdlicka (liaison, nonvoting), Standards Engineer Liaison, AWWA, Denver, Colo.

M. Huynh, JM Manufacturing Co. Inc., DBA JM Eagle, Bakersfield, Calif.

K.S. Jeng-Bulloch, City of Huntsville, Huntsville, Tex.

T.E. Layton, Orange County Utilities, Orlando, Fla.

T. Marti, Underground Solutions Inc., Warrendale, Pa.

S.K. Rajah, Bellevue, Wash.

E.E. Schmidt, Diamond Plastics Corporation, Grand Island, Neb.

G. Scoby, Palo Alto Utilities Department, Los Gatos, Calif.

S. Scott, NAPCO Pipe & Fittings, Houston, Tex.

B. Sukolsky, Harco, Bellingham, Wash.

J.A. Volpe, North American Pipe Corporation, Wayne, Pa.

R.P. Walker, Underground Solutions Inc., Southlake, Tex.

W.R. Whidden, Woolpert, Orlando, Fla.

The AWWA Standards Committee on Polyvinyl Chloride Pressure Pipe and Fittings, which

reviewed and approved this standard, had the following personnel at the time of approval:

Bill Whidden, Chair

Robert P. Walker, Vice-Chair

General Interest Members

S.D. Adams, Jacobs, Corvallis, Ore.

M.L. Busby, Lockwood, Andrews, & Newnam, Inc., Dallas, Tex.

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载

标签： #配件 #管 #聚氯乙烯

摘要：

本页面介绍ANSI AWWA C900-22标准，该标准规定了4英寸至60英寸（100毫米至1500毫米）聚氯乙烯（PVC）压力管道和预制配件的制造、测试与安装要求。作为对ANSI AWWA C900-16的修订版，2022版更新了材料性能、连接方式及质量控制条款，适用于饮用水及污水输送系统。阅读本文可了解最新规范变更、管道尺寸范围、压力等级以及符合性认证细节，为工程采购与设计提供权威参考。

展开>> 收起<<

ANSI AWWA C900-22 聚氯乙烯（PVC）压力管道和预制配件，4英寸至60英寸（100毫米至1500毫米）范围，符合ANSIAWWA C900-22（ANSI AWWA C900-16修订版）标准 2022.pdf

共52页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

ANSI AWWA C900-22 聚氯乙烯（PVC）压力管道和预制配件，4英寸至60英寸（100毫米至1500毫米）范围，符合ANSIAWWA C900-22（ANSI AWWA C900-16修订版）标准 2022

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: