MIL-STD-1760F-2025 飞机机库电气互连系统

VIP专享

那山那人那狗 2025-10-24 64 3.11MB 209 页 24星币

侵权投诉

MIL-STD-

1760F

9 September 2025

SUPERSEDING

MIL-STD-1760E

24 October 2007

DEPARTMENT OF DEFENSE

INTERFACE STANDARD

AIRCRAFT/STORE ELECTRICAL

INTERCONNECTION SYSTEM

AMSC: N/A AREA: SESS

METRIC

DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

MIL-STD-1760F

FOREWORD

1. This standard is approved for use by all Departments and Agencies of the Department of

Defense.

2. Prior to this standard, an aircraft and the stores it carried were typically developed

independent of each other or were developed exclusively for each other. This usually

resulted in unique aircraft/store electrical interconnection requirements, the general

proliferation of overall store interface designs, low levels of interoperability, and costly

aircraft modifications to achieve required store utilization flexibility. Trends in store

technology moving toward more complex store functions, which require increasing amounts

of avionics data and control information from aircraft systems, were predicted to lead to

insurmountable aircraft/store interfacing problems.

3. The goal is to develop aircraft that are compatible with a wide variety of stores and stores

that are compatible with a wide variety of aircraft. This standard supports this goal by

defining a standard electrical (and fiber optic) interconnection system for aircraft and stores.

This interconnection system is based on the use of a standard connector, a standard signal

set, and a standard serial digital data interface for control, monitor, and release of stores.

Application of this standard to new and existing aircraft and new stores will significantly

reduce and stabilize the number and variety of signals required at aircraft/store interfaces,

minimize the impact of new stores on future stores management systems, and increase

store interoperability among the services, within NATO, and with other allies.

4. Some requirements in MIL-STD-1760 are stated by invoking other documents, including

MIL-STD-1553 and MIL-DTL-38999. If tiering of requirements is limited to one level on a

specific contract, it may be necessary to include references to these second-tier documents

in the contractual specification.

5. The following areas are limitations of this standard:

a. Requirements for mechanical, aerodynamic, logistic, and operational compatibility are

not covered.

b. Since factors such as size, shape, loads, clearances, and functional limitations are not

specified; full operability of stores on aircraft cannot be assured.

c. Signals for emergency jettison of stores are not specified. However, this does not

preclude the use of the signals in this standard if they are compatible with the

requirements for emergency jettison.

d. This standard does not attempt to establish the EMI/EMC requirements on the aircraft or

store, although it does define an interface that is generally capable of meeting these

requirements.

6. Comments, suggestions, or questions on this document should be addressed to:

Engineering.Standards@wpafb.af.mil. Since contact information can change, you may want

to verify the currency of this address information using the ASSIST Online database at

https://assist.dla.mil.

MIL-STD-1760F

iii

CONTENTS

PARAGRAPH PAGE

1 SCOPE ........................................................................................................................ 1

1.1 Scope .......................................................................................................................... 1

1.2 Purpose ....................................................................................................................... 1

1.3 Application ................................................................................................................... 1

2 APPLICABLE DOCUMENTS ...................................................................................... 1

2.1 General ........................................................................................................................ 1

2.2 Government Documents .............................................................................................. 1

2.2.1 Specifications, standards, and handbooks ............................................................ 1

2.3 Other Government Documents, Drawings, And Publications ....................................... 2

2.4 Non-Government Publications ...................................................................................... 2

2.5 Order Of Precedence ................................................................................................... 3

3 DEFINITIONS .............................................................................................................. 3

3.1 Definitions .................................................................................................................... 3

3.1.1 Aircraft .................................................................................................................. 3

3.1.2 Aircraft/store Electrical Interconnection System (AEIS) ......................................... 3

3.1.3 Electrical interface types ....................................................................................... 3

3.1.3.1 Aircraft Station Interface (ASI) ........................................................................ 3

3.1.3.2 Carriage Store Interface (CSI) ........................................................................ 3

3.1.3.3 Carriage Store Station Interface (CSSI) ......................................................... 3

3.1.3.4 Mission Store Interface (MSI) ......................................................................... 3

3.1.3.5 Routing Network Aircraft Subsystem Port (RNASP) ....................................... 3

3.1.4 Provisions ............................................................................................................. 4

3.1.5 Store ..................................................................................................................... 4

3.1.5.1 Carriage stores .............................................................................................. 4

3.1.5.2 Mission stores ................................................................................................ 4

3.1.5.3 Dispensers ..................................................................................................... 4

3.1.6 Stores management system .................................................................................. 4

3.1.7 Suspension and release equipment (S&RE) ......................................................... 4

3.1.8 Random noise ....................................................................................................... 4

3.1.9 Periodic noise ....................................................................................................... 4

3.1.10 Impulse noise ........................................................................................................ 5

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载

标签： #电气

摘要：

MIL-STD-1760F-2025标准是美军发布的最新飞机与机库电气互连系统规范，定义了飞机驻停、维护及武器挂载期间与地面支持设备之间的电气接口、数据总线、电源分配及信号协议要求。该标准替代1760E版本，强化了智能武器接口兼容性、机库电源管理安全协议，并新增了支持新一代有人/无人协同平台的互操作设计。适用于战斗机、运输机及直升机在机库场景下的电缆连接器、航电测试端口及地面供电系统的标准化部署，旨在消除不同机型与地面设备间的电气不匹配风险，提升外场维护效率与作战就绪率。

展开>> 收起<<

MIL-STD-1760F-2025 飞机机库电气互连系统.pdf

共209页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

MIL-STD-1760F-2025 飞机机库电气互连系统

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

MIL-STD-1760F-2025 飞机 机库 电气互连系统

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

MIL-STD-1760F-2025 飞机机库电气互连系统