壳牌公司材料与设备标准 SHELL MESC SPE 74-017-2016 镍合金管（ASTM B 165修订补充） NICKEL ALLOY PIPE (AMENDMENTSSUPPLEMENTS TO ASTM B 165)

VIP免费

venus 2026-01-06 9 26.92KB 7 页 20星币

侵权投诉

TECHNICAL SPECIFICATION

NICKEL ALLOY PIPE

(AMENDMENTS/SUPPLEMENTS TO ASTM B 165)

MESC SPE 74/017

February 2016

MESC SPECIFICATION DOCUMENT

This document is restricted. Neither the whole nor any part of this document may be disclosed to any third party without the prior written consent of Shell Global

document may be reproduced, stored in any retrieval system or transmitted in any form or by any means (electronic, mechanical, reprographic, recording or otherwise)

without the prior written consent of the copyright owner.

MESC SPE 74/017

February 2016

Page 2

PREFACE

MESC (Materials and Equipment Standards and Code) SPE documents reflect the views, at the time of publication, of:

Shell Global Solutions International B.V. (Shell GSI)

and/or

Shell International Exploration and Production B.V. (SIEP)

and/or

other Shell Service Companies.

They are based on the experience acquired during their involvement with the design, construction, operation and

maintenance of processing units and facilities, and they are supplemented with the experience of Shell Operating Units.

Where appropriate they are based on, or reference is made to, international, regional, national and industry standards.

The objective is to set the recommended standard for good design and engineering practice applied by Shell companies

operating an oil refinery, gas handling installation, chemical plant, oil and gas production facility, or any other such

facility, and thereby to achieve maximum technical and economic benefit from standardization.

The information set forth in these publications is provided to Shell companies for their consideration and decision to

implement. This is of particular importance where MESC SPEs may not cover every requirement or diversity of condition

at each locality. The system of MESC SPEs is expected to be sufficiently flexible to allow individual Operating Units to

adapt the information set forth in MESC SPEs to their own environment and requirements.

When Contractors or Manufacturers/Suppliers use MESC SPEs they shall be solely responsible for the quality of work

and the attainment of the required design and engineering standards. In particular, for those requirements not

specifically covered, the Principal will expect them to follow those practices, which will achieve the same level of

integrity as reflected in the MESC SPEs. If in doubt, the Contractor or Manufacturer/Supplier shall, without detracting

from his own responsibility, consult the Principal or its technical advisor.

The right to use MESC SPEs is granted by Shell GSI, in most cases under Service Agreements primarily with Shell

companies and other companies receiving technical advice and services from Shell GSI or another Shell Service

Company. Consequently, three categories of users of MESC SPEs can be distinguished:

1) Operating Units having a Service Agreement with Shell GSI or other Shell Service Company. The use of MESC

SPEs by these Operating Units is subject in all respects to the terms and conditions of the relevant Service

Agreement.

2) Other parties who are authorized to use MESC SPEs subject to appropriate contractual arrangements (whether

as part of a Service Agreement or otherwise).

3) Contractors/subcontractors and Manufacturers/Suppliers under a contract with users referred to under 1) or 2)

which requires that tenders for projects, materials supplied or - generally - work performed on behalf of the said

users comply with the relevant standards.

Subject to any particular terms and conditions as may be set forth in specific agreements with users, Shell GSI

disclaims any liability of whatsoever nature for any damage (including injury or death) suffered by any company or

person whomsoever as a result of or in connection with the use, application or implementation of any MESC SPE,

combination of MESC SPEs or any part thereof, even if it is wholly or partly caused by negligence on the part of Shell

GSI or other Shell Service Company. The benefit of this disclaimer shall inure in all respects to Shell GSI and/or any

Shell Service Company, or companies affiliated to these companies, that may issue MESC SPEs or require the use of

MESC SPEs.

Without prejudice to any specific terms in respect of confidentiality under relevant contractual arrangements, MESC

SPEs shall not, without the prior written consent of Shell GSI, be disclosed by users to any company or person

whomsoever and the MESC SPEs shall be used exclusively for the purpose for which they have been provided to the

user. They shall be returned after use, including any copies, which shall only be made by users with the express prior

written consent of Shell GSI. The copyright of MESC SPEs vests in Shell GSI. Users shall arrange for MESC SPEs to

be held in safe custody and Shell GSI may at any time require information satisfactory to them in order to ascertain how

users implement this requirement.

All administrative queries should be directed to the MESC SPE Administrator in Shell GSI.

MESC SPE 74/017

February 2016

Page 3

TABLE OF CONTENTS

PART I INTRODUCTION ........................................................................................................ 4

1.1 SCOPE ........................................................................................................................ 4

1.2 DISTRIBUTION, INTENDED USE AND REGULATORY CONSIDERATIONS ......... 4

1.3 DEFINITIONS ............................................................................................................. 4

1.4 CHANGES SINCE PREVIOUS EDITION ................................................................... 4

1.5 COMMENTS ON THIS MESC SPE ............................................................................ 5

PART II AMENDMENTS/SUPPLEMENTS TO ASTM B 165:2005(R2014) ............................. 6

PART III REFERENCES ........................................................................................................... 7

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #合金 #镍 #镍合金

摘要：

本页面详细介绍了壳牌公司材料与设备标准SHELL MESC SPE 74-017-2016，该标准是针对镍合金管（ASTM B165修订补充）的专用技术规范。作为石油、化工及能源行业高端项目采购与质量控制的重要依据，该文档在ASTM B165标准基础上，增加了壳牌对镍合金管的化学成分、力学性能、尺寸公差、无损检测及交货状态的严格修订与补充要求。内容涵盖UNS N04400等典型镍合金牌号的应用范围，以及针对高温、高压及腐蚀性环境下的管道选型与验收准则。对于从事国际工程采购、管道材料工程师及供应商

展开>> 收起<<

壳牌公司材料与设备标准 SHELL MESC SPE 74-017-2016 镍合金管（ASTM B 165修订补充） NICKEL ALLOY PIPE (AMENDMENTSSUPPLEMENTS TO ASTM B 165).pdf

共7页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

壳牌公司材料与设备标准 SHELL MESC SPE 74-017-2016 镍合金管（ASTM B 165修订补充） NICKEL ALLOY PIPE (AMENDMENTSSUPPLEMENTS TO ASTM B 165)

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: