API RP 19GLHB-2020(R2025) 1ST ED A1+A2+A3 气举手册 第一版 - 高清原版

VIP专享
可爱滴龅牙 2026-01-25 60 25.53MB 301 页 20星币
侵权投诉
Gas Lift Handbook
API RECOMMENDED PRACTICE 19GLHB
FIRST EDITION, JUNE 2020
ADDENDUM 1, MAY 2023
ADDENDUM 2, NOVEMBER 2024
ADDENDUM 3, AUGUST 2025
REAFFIRMED, OCTOBER 2025
Special Notes
API publications necessarily address problems of a general nature. With respect to particular circumstances,
local, state, and federal laws and regulations should be reviewed. The use of API publications is voluntary. In
some cases, third parties or authorities having jurisdiction may choose to incorporate API standards by
reference and may mandate compliance.
Neither API nor any of API's employees, subcontractors, consultants, committees, or other assignees make
any warranty or representation, either express or implied, with respect to the accuracy, completeness, or
usefulness of the information contained herein, or assume any liability or responsibility for any use, or the results
of such use, of any information or process disclosed in this publication. Neither API nor any of API’s employees,
subcontractors, consultants, or other assignees represent that use of this publication would not infringe upon
privately owned rights.
API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to ensure
the accuracy and reliability of the data contained in them; however, the Institute makes no representation,
warranty, or guarantee in connection with this publication and hereby expressly disclaims any liability or
responsibility for loss or damage resulting from its use or for the violation of any authorities having jurisdiction
with which this publication may conflict.
API publications are published to facilitate the broad availability of proven, sound engineering and operating
practices. These publications are not intended to obviate the need for applying sound engineering judgment
regarding when and where these publications should be used. The formulation and publication of API
publications is not intended in any way to inhibit anyone from using any other practices.
Any manufacturer marking equipment or materials in conformance with the marking requirements of an API
standard is solely responsible for complying with all the applicable requirements of that standard. API does not
represent, warrant, or guarantee that such products do in fact conform to the applicable API standard.
All rights reserved. No part of this work may be reproduced, translated, stored in a retrieval system, or transmitted
by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission
from the publisher. Contact the Publisher, API Publishing Services, 200 Massachusetts Avenue, NW, Suite 1100,
Washington, DC 20001.
Copyright © 2020 American Petroleum Institute
iii
Foreword
Nothing contained in any API publication is to be construed as granting any right, by implication or otherwise, for
the manufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should
anything contained in the publication be construed as insuring anyone against liability for infringement of letters
patent.
The verbal forms used to express the provisions in this document are as follows.
Shall: As used in a standard, “shall” denotes a minimum requirement in order to conform to the standard.
Should: As used in a standard, “should” denotes a recommendation or that which is advised but not required in
order to conform to the standard.
May: As used in a standard, “may” denotes a course of action permissible within the limits of a standard.
Can: As used in a standard, “can” denotes a statement of possibility or capability.
This document was produced under API standardization procedures that ensure appropriate notification and
participation in the developmental process and is designated as an API standard. Questions concerning the
interpretation of the content of this publication or comments and questions concerning the procedures under
which this publication was developed should be directed in writing to the Director of Standards, American
Petroleum Institute, 200 Massachusetts Avenue, NW, Suite 1100, Washington, DC 20001. Requests for
permission to reproduce or translate all or any part of the material published herein should also be addressed
to the director.
Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years. A one-
time extension of up to two years may be added to this review cycle. Status of the publication can be ascertained
from the API Standards Department, telephone (202) 682-8000. A catalog of API publications and materials is
published annually by API, 200 Massachusetts Avenue, NW, Suite 1100, Washington, DC 20001.
Suggested revisions are invited and should be submitted to the Standards Department, API, 200
Massachusetts Avenue, NW, Suite 1100, Washington, DC 20001, standards@api.org.
摘要：

本规范文档为API RP 19GLHB-2020(R2025) 1ST ED A1+A2+A3《气举手册》第一版的高清原版资源，内容涵盖气举系统设计、运行与维护的核心技术指南，是石油天然气工程领域中关于气举采油工艺的权威参考标准。该版本整合了2020年发布以来的三次修订补充（A1、A2、A3），更新了设备选型、故障诊断及效率优化等关键技术要点，适合油田工程师、采油工艺技术人员、高等院校师生以及从事人工举升系统研究与应用的从业者使用。通过本手册，用户能够系统掌握气举法在复杂井况下的应用逻辑与最新行

展开>> 收起<<
API RP 19GLHB-2020(R2025) 1ST ED A1+A2+A3 气举手册 第一版 - 高清原版.pdf

共301页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：可爱滴龅牙 分类：国外协会 价格：20星币 属性：301 页 大小：25.53MB 格式：PDF 时间：2026-01-25

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 301
评分 收藏
分享
立即下载
客服
关注