美国联邦航空局 FAA AC 150-5345-26D FAA L-823型插头、插座及电缆连接器规范 2008

VIP免费

venus 2026-02-01 7 770.79KB 21 页 16星币

侵权投诉

U.S. Department

of Transportation

Federal Aviation

Administration

Subject: FAA SPECIFICATION FOR L-823 Date: 9/30/08 AC No.: 150/5345-26D

PLUG AND RECEPTACLE,

CABLE CONNECTORS

Initiated

by:

AAS-100 Change:

1. PURPOSE. This advisory circular (AC) contains the specification for plug and receptacle (cable

connectors) used with underground power cables, isolation transformer leads, and light fixture leads for airport

lighting systems.

2. EFFECTIVE DATE. Effective six months after the issue date of this AC, only that equipment

qualified per the specifications herein will be listed per AC 150/5345-53, Airport Lighting Equipment

Certification Program.

3. CANCELLATION. AC 150/5345-26C, FAA Specification for L-823 Plug and Receptacle, Cable

Connectors, dated April 17, 2000, is canceled.

4. APPLICATION. The Federal Aviation Administration (FAA) recommends the guidance and

specifications in this Advisory Circular for Plug and Receptacle, Cable Connectors. In general, use of this AC

is not mandatory. However, use of this AC is mandatory for all projects funded with federal grant monies

through the Airport Improvement Program (AIP) and with revenue from the Passenger Facility Charges (PFC)

Program. See Grant Assistance No. 34, “Policies, Standards, and Specifications,” and PFC Assurance No.9,

“Standards and Specifications.”

5. PRINCIPAL CHANGES. The changes in this AC include the following:

a. Update drawings to .DWG format. All dimensions remain the same.

b. Sources for referenced documents are updated.

c. Shall statements are updated to “must” statements.

d. Paragraph 3.3.2 is updated to clarify requirements for the calculation of tensile strength of the

conductor.

e. Paragraph 4.2.1 is reworded to clarify pass/fail criteria.

f. Paragraph 4.2.6 now references Section 1200.15 vice 1200.9 of UL-1581 to better address the

current edition of the UL standard.

g. Paragraph 5.1 is updated to correct the insulation resistance value to 75,000 megohms.

6. METRIC UNITS. To promote an orderly transition to metric units, this specification includes both

English and metric dimensions. The metric conversions may not be exact metric equivalents, and until there is

an official changeover to the metric system, the English dimensions will govern.

7. COMMENTS OR SUGGESTIONS for improvements to this AC should be sent to:

北极星标准文库-高清标准规范分享平台 www.bjxwk.com

AC 150/5345-26D 9/30/08

Manager, Airport Engineering Division

Federal Aviation Administration

ATTN: AAS-100

800 Independence Avenue, S.W.

Washington, DC 20591

8. COPIES OF THIS AC. The Office of Airport Safety and Standards is in the process of

making ACs available to the public through the Internet. These ACs may be accessed through the FAA

website: www.faa.gov/airports_airtraffic/airports/resources/advisory_circulars/. A printed copy of this

AC and other ACs can be ordered from:

U.S. Department of Transportation

Subsequent Distribution Office

Ardmore East Business Center

3341 Q 75th Avenue

Landover, MD 20785.

Michael J. O’Donnell

Director, Office of Airport Safety and Standards

北极星标准文库-高清标准规范分享平台 www.bjxwk.com

9/30/08 AC 150/5345-26D

FAA SPECIFICATION FOR L-823 PLUG AND RECEPTACLE, CABLE CONNECTORS

1. SCOPE AND CLASSIFICATION.

1.1 Scope. This specification contains requirements for plugs and receptacles (cable connectors) to be used for

underground cable connections, for power cables, isolation transformer leads, and light fixture leads for airport

systems.

1.2 Classification. Cable connectors are classified by this specification into two types, two classes, and six

styles of plugs and two types, two classes, and six styles of receptacles. Formerly, cable connectors were

classified only by a figure number. Figures in this specification are now numbered consecutively

1.2.1 Type. Plugs and receptacles with the following electrical characteristics are covered by the specification:

Type I 1 conductor, 25 ampere, 5000 volt

Type II 2 conductor, 20 ampere, 600 volt

1.2.2 Class. Plugs and receptacles with the following attachment methods are covered by this specification:

Class A Factory molded to conductor(s)

Class B Field attached to conductor(s)

1.2.3 Style. Plugs and receptacles with following styles of housing are covered by this specification:

Style 1 Plug, figure 1(a)

Style 2 Plug, figure 2(a)

Style 3 Plug, figures 3(a), & 3(c)

Style 4 Plug, figures 4(a), 4(b) & 4(c)

Style 5 Plug, figures 7(a), 7(b), & 7(c)

Style 6 Plug, figure 8

Style 7 Receptacle, figure 1(b)

Style 8 Receptacle, figure 1(c)

Style 9 Receptacle, figure 2(b)

Style 10 Receptacle, figures 3(b), & 3(d)

Style 11 Receptacle, figures 5(a), 5(b), & 5(c)

Style 12 Receptacle, figures 6(a), 6(b), & 6(c)

2. REFERENCED DOCUMENTS.

2.1 General. The following documents, of the issue in effect on the date of application for qualification, are

applicable to the extent specified in this AC.

2.2 Federal Aviation Administration (FAA) Standards.

AC 150/5345-53 Airport Lighting Equipment Certification Program

AC-150/5345-7 L-824 Underground Electrical Cable for Airport Lighting Circuits, Specification

for

北极星标准文库-高清标准规范分享平台 www.bjxwk.com

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #插头 #插座

摘要：

本页面详细介绍美国联邦航空局（FAA）2008年发布的AC 150-5345-26D标准文件，该规范明确规定了用于机场助航灯光系统的L-823型插头、插座及电缆连接器的设计、性能、测试及安装要求。作为机场照明基础设施的关键连接部件，L-823系列连接器必须满足FAA严格的环境耐久性、电气安全性和机械互锁标准，确保在极端天气和频繁插拔条件下仍能保持可靠的电路连接与防水密封。该规范替代了旧版26C版本，重点更新了绝缘材料要求、接触电阻限值以及屏蔽性能测试方法，适用于机场跑道、滑行道和进近灯光系统的电

展开>> 收起<<

美国联邦航空局 FAA AC 150-5345-26D FAA L-823型插头、插座及电缆连接器规范 2008.pdf

共21页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

美国联邦航空局 FAA AC 150-5345-26D FAA L-823型插头、插座及电缆连接器规范 2008

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: