BS EN 16767-2020 工业阀门 金属止回阀

VIP专免
史蒂文 2026-02-03 26 1.16MB 20 页 20星币
侵权投诉
BSI Standards Publication
Industrial valves — Metallic check valves
BS EN 16767:2020
北极星标准文库-高清标准规范分享平台 www.bjxwk.com
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 16767
April 2020
ICS 23.060.50 Supersedes EN 16767:2016
English Version
Industrial valves - Metallic check valves
Robinetterie industrielle - Clapets de non-retour
métalliques
Industriearmaturen - Metallische
Rückflussverhinderer
This European Standard was approved by CEN on 17 February 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 16767:2020 E
National foreword
This British Standard is the UK implementation of EN 16767:2020. It
supersedes BS EN 16767:2016, which is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee PSE/18/2, Gate, globe, diaphragm and check valves.
A list of organizations represented on this committee can be obtained on
request to its secretary.
This publication does not purport to include all the necessary provisions
of a contract. Users are responsible for its correct application.
© The British Standards Institution 2020
Published by BSI Standards Limited 2020
ISBN 978 0 539 01810 3
ICS 23.060.50
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 30 April 2020.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN 16767:2020
北极星标准文库-高清标准规范分享平台 www.bjxwk.com
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 16767
April 2020
ICS 23.060.50 Supersedes EN 16767:2016
English Version
Industrial valves - Metallic check valves
Robinetterie industrielle - Clapets de non-retour
métalliques
Industriearmaturen - Metallische
Rückflussverhinderer
This European Standard was approved by CEN on 17 February 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 16767:2020 E
BS EN 16767:2020
北极星标准文库-高清标准规范分享平台 www.bjxwk.com

标签： #阀门 #金属 #阀

摘要：

BS EN 16767-2020 是欧洲标准委员会发布的工业阀门领域重要标准，专门针对金属止回阀的设计、制造与测试要求。该标准替代了之前的版本，旨在确保止回阀在高压、高温及腐蚀性介质等严苛工况下的可靠性与安全性。内容涵盖阀体材料、密封性能、压力等级、流量特性及耐久性测试规范，适用于石油、化工、电力、水处理等行业的管道系统。遵循此标准有助于提升产品国际竞争力，降低泄漏风险，并确保与欧盟法规的合规性。本页详细解析 BS EN 16767-2020 的核心技术条款与认证要求，为阀门制造商、工程师及采购

展开>> 收起<<
BS EN 16767-2020 工业阀门 金属止回阀.pdf

共20页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：史蒂文 分类：国际标准 价格：20星币 属性：20 页 大小：1.16MB 格式：PDF 时间：2026-02-03

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 20
评分 收藏
分享
立即下载 VIP免费下载
客服
关注