JIS S1016-2004 讲堂用固定的桌椅

VIP免费
standardshare 2026-02-08 7 531.92KB 12 页 18星币
侵权投诉
JIS
JAPANESE
INDUSTRIAL
STA
N
DA
R
D
Translated and Published by
Japanese Standards Association
Fixed desk and chair
for
lecture
room
ICs
97.140
Reference
number
:
JIS
S
1016
:
2004
(E)
PROTECTED
BY
COPYRIGHT
7s
S
1016:2004
Foreword
This translation has been made based on the original Japanese Industrial
Standard revised by the Minister of Economy, Trade and Industry through
deliberations at the Japanese Industrial Standards Committee,
as
the
result
of
proposal for revision
of
Japanese Industrial Standard submitted
by Japan Office
&
Institutional Furniture Association (JOIFA)/Japanese
Standards Association (JSA) with the draft being attached, based on the
provision of Article 12 Clause
1
of the Industrial Standardization Law
applicable to the case of revision by the provision
of
Article 14.
Consequently
JIS
S
1016
:
1995 is replaced with this Standard.
Attention
is
drawn
to
the possibility that some parts of
this
Standard
may conflict with a patent right, application for a patent after opening
to the public, utility model right
or
application for registration
of
utility
model after opening
to
the public which have technical properties. The
relevant Minister and the Japanese Industrial Standards Committee
are not responsible for identifying the patent right, application for a
patent after opening to the public, utility model right or application
for
registration
of
utility model after opening to the public which have the
said technical properties.
Date
of
Establishment: 1976-04-01
Date of Revision: 2004-09-20
Date
of
Public Notice in Official Gazette: 2004-09-21
Investigated by: Japanese Industrial Standards Committee
Standards Board
Technical Committee on Consumer Life
Products
JIS
S
1016
:2004,
First English edition published in
2005-02
Translated and published by: Japanese Standards Association
4-1-24, Akasaka, Minato-ku,
Tokyo,
107-8440
JAPAN
In the event
of
any doubts arising as
to
the contents,
the original
JIS
is
to
be the final authority.
O
JSA
2005
All
rights reserved.
No
part
of
this publication may be reproduced or utilized
in
any form
or
by
any
means, electronic or mechanical, including photocopying and
microfilm,
without permission in
writing from the publisher.
Printed in Japan
PROTECTED
BY
COPYRIGHT
S
1016
:
2004
1
2
3
4
5
6
6.1
6.2
7
8
9
9.1
9.2
9.3
9.4
10
11
12
Contents
Page
Scope
....................................................................................................................
Normative references
........................................................................................
Definitions
..........................................................................................................
Dimensions
.........................................................................................................
Classification
......................................................................................................
Quality
.................................................................................................................
Appearance
.......................................................................................................
Performance
......................................................................................................
Construction
.......................................................................................................
Materials
.............................................................................................................
Test
......................................................................................................................
General condition
of
test
................................................................................
Strength test
....................................................................................................
Surface treatment test
....................................................................................
Insulation resistance, withstand voltage test
............................................
Inspection
............................................................................................................
Marking
...............................................................................................................
Precautions on handling and maintenance control
.....................................
Attached Table
1
Normative references
...............................................................
1
1
1
1
1
1
1
1
2
3
3
3
4
6
7
7
7
7
8
(i)
PROTECTED
BY
COPYRIGHT
摘要：

本页面详细介绍日本工业标准JIS S1016-2004《讲堂用固定的桌椅》的技术规范与要求。该标准主要适用于学校、会议厅、礼堂等公共场所中安装的固定式桌椅组合，涵盖结构强度、稳定性、尺寸规格、安全性能及耐久性测试方法。内容适用于采购、设计、检验及使用方参考，确保产品符合日本国内对讲堂座椅的安全和人体工学要求。通过了解该标准，用户可有效辨别合规产品，提升讲堂空间的使用舒适度与安全性。

展开>> 收起<<
JIS S1016-2004 讲堂用固定的桌椅.pdf

共12页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：standar... 分类：国际标准 价格：18星币 属性：12 页 大小：531.92KB 格式：PDF 时间：2026-02-08

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 12
评分 收藏
分享
立即下载 VIP免费下载
客服
关注