ANSI AWWA F101-19 接触成型玻璃纤维增强塑料洗涤水槽和水槽 2019

VIP免费

那山那人那狗 2026-02-26 24 897.43KB 28 页 20星币

侵权投诉

ANSI/AWWA F101-19

(Revision of ANSI/AWWA F101-13)

AWWA Standard

Contact-Molded,

Fiberglass-

Reinforced Plastic

Wash-Water

Troughs and

Launders

Effective date: June 1, 2019.

First edition approved by AWWA Board of Directors Jan. 23, 1991.

This edition approved Jan. 24, 2019.

Approved by American National Standards Institute Feb. 22, 2019.

AWWA Standard

This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe

minimum requirements and do not contain all of the engineering and administrative information normally contained in

specifications. The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each

optional feature is specified by the user, the product or service is not fully defined. AWWA publication of a standard does

not constitute endorsement of any product or product type, nor does AWWA test, certify, or approve any product. The

use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence over or displace any

applicable law, regulation, or code of any governmental authority. AWWA standards are intended to represent a consensus

of the water industry that the product described will provide satisfactory service. When AWWA revises or withdraws this

standard, an official notice of action will be placed in the Official Notice section of Journal AWWA. The action becomes

effective on the first day of the month following the month of Journal AWWA publication of the official notice.

American National Standard

An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An

American National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The

existence of an American National Standard does not in any respect preclude anyone, whether that person has approved

the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not

conforming to the standard. American National Standards are subject to periodic review, and users are cautioned to obtain

the latest editions. Producers of goods made in conformity with an American National Standard are encouraged to state

on their own responsibility in advertising and promotional materials or on tags or labels that the goods are produced in

conformity with particular American National Standards.

Caution Notice: The American National Standards Institute (ANSI) approval date on the front cover of this standard indicates

completion of the ANSI approval process. This American National Standard may be revised or withdrawn at any time. ANSI

procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date

of ANSI approval. Purchasers of American National Standards may receive current information on all standards by calling

or writing the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036; 212.642.4900,

or emailing info@ansi.org.

ISBN-13, print: 978-1-62576-344-0 eISBN-13, electronic: 978-1-61300-516-3

DOI: http://dx.doi.org/10.12999/AWWA.F101.19

electronic or mechanical, including scanning, recording, or any information or retrieval system. Reproduction and

commercial use of this material is prohibited, except with written permission from the publisher.

Printed in USA

reproduced or transmitted in any form or by any means,

electronic or mechanical, including scanning, recording, or any

information or retrieval system. Reproduction and commercial

use of this material is prohibited, except with written permission

from the publisher. Please send any requests or questions to

permissions@awwa.org.

iii

Committee Personnel

The AWWA Standards Committee on Fiberglass Weirs, Troughs, and Baffles, which reviewed

and approved this standard, had the following personnel at the time of approval:

Justin Reeves, Chair

General Interest Members

G.M. Jones, Columbia Falls, Mont.

J.W. Green,* Standards Council Liaison, Lockwood, Andrews & Newnam Inc., Oakbrook

Terrace, Ill.

J.C. Reeves, Lockwood, Andrews & Newnam Inc., Fort Worth, Tex.

E. Meek,* Standards Engineer Liaison, AWWA, Denver, Colo.

Producer Members

P.A. Merimee, MFG Construction and Water Treatment Products, Union City, Pa.

E.G. Renz, Warminster Fiberglass Co., Southampton, Pa.

D. Vorse,† MFG Construction and Water Treatment Products, Union City, Pa.

User Members

S. Ali, Detroit Water & Sewerage Dept., Capital Management Group, Detroit, Mich.

J.B. Pagenkopp, Metropolitan Water District of Southern California, La Verne, Calif.

W.A. Sleeper,† Metropolitan Water District of Southern California, La Verne, Calif.

J.S. Taylor, City of Tyler, Tyler, Tex.

* Liaison, non-voting

† Alternate

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #增强 #塑料 #纤维增强

摘要：

本文详细解读ANSI AWWA F101-19标准，该标准专为接触成型玻璃纤维增强塑料（FRP）洗涤水槽及水槽系统设计，于2019年发布。标准涵盖了材料要求、制造工艺、结构设计、性能测试及验收准则，确保水槽在给水处理、污水处理及工业应用中具备优异的耐腐蚀性、高强度和长期耐用性。内容适用于工程采购、水务设备运维及玻璃钢制品生产厂家，帮助用户理解合规产品的选型要点与质量控制方法，提升设施运行可靠性与维护效率。

展开>> 收起<<

ANSI AWWA F101-19 接触成型玻璃纤维增强塑料洗涤水槽和水槽 2019.pdf

共28页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

ANSI AWWA F101-19 接触成型玻璃纤维增强塑料洗涤水槽和水槽 2019

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: