BS EN 4890-2022 航空航天系列 X4CrNiMo16-5-1钢空气熔炼淬火和回火板材和薄板 0.3毫米 ≤ a ≤ 50毫米 900兆帕 ≤ Rm ≤ 1050兆帕

VIP免费

史蒂文 2026-03-07 12 1.1MB 12 页 20星币

侵权投诉

BSI Standards Publication

Aerospace series — Steel X4CrNiMo16-5-1 —

Air melted — Hardened and tempered —

Sheets and plates — 0,3 mm ≤ a ≤ 50 mm —

900 MPa ≤ Rm ≤ 1 050 MPa

BS EN 4890:2022

北极星标准文库-高清标准规范分享平台 www.bjxwk.com

EUROPEAN STANDARD

NORME EUROPÉENNE

EUROPÄISCHE NORM

EN 4890

May 2022

ICS 49.025.10

English Version

Aerospace series - Steel X4CrNiMo16-5-1 - Air melted -

Hardened and tempered - Sheets and plates - 0,3 mm  a 

50 mm - 900 MPa  Rm  1 050 MPa

Série aérospatiale - Acier X4CrNiMo16-5-1 - Élaboré à

l'air - Trempé et revenu - Tôles et plaques - 0,3 mm

 a  50 mm - 900 MPa  Rm  1 050 MPa

Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 -

Lufterschmolzen - Gehärtet- und angelassen - Bleche

und Platten - 0,3 mm  a  50 mm - 900 MPa  Rm 

1 050 MPa

This European Standard was approved by CEN on 13 March 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

All rights of exploitation in any form and by any means reserved

worldwide for CEN national Members.

Ref. No. EN 4890:2022 E

National foreword

This British Standard is the UK implementation of EN 4890:2022.

The UK participation in its preparation was entrusted to Technical

Committee ACE/61/-/15, Steels for Aerospace Purposes.

A list of organizations represented on this committee can be obtained on

request to its committee manager.

Contractual and legal considerations

This publication has been prepared in good faith, however no

representation, warranty, assurance or undertaking (express or

implied) is or will be made, and no responsibility or liability is or will be

accepted by BSI in relation to the adequacy, accuracy, completeness or

reasonableness of this publication. All and any such responsibility and

liability is expressly disclaimed to the full extent permitted by the law.

This publication is provided as is, and is to be used at the

recipient’s own risk.

The recipient is advised to consider seeking professional guidance with

respect to its use of this publication.

This publication is not intended to constitute a contract. Users are

responsible for its correct application.

Published by BSI Standards Limited 2022

ISBN 978 0 539 14008 8

ICS 49.025.01; 49.025.10

Compliance with a British Standard cannot confer immunity from

legal obligations.

This British Standard was published under the authority of the

Standards Policy and Strategy Committee on 31 July 2022.

Amendments/corrigenda issued since publication

Date Text affected

BRITISH STANDARD

BS EN 4890:2022

北极星标准文库-高清标准规范分享平台 www.bjxwk.com

EUROPEAN STANDARD

NORME EUROPÉENNE

EUROPÄISCHE NORM

EN 4890

May 2022

ICS 49.025.10

English Version

Aerospace series - Steel X4CrNiMo16-5-1 - Air melted -

Hardened and tempered - Sheets and plates - 0,3 mm  a 

50 mm - 900 MPa  Rm  1 050 MPa

Série aérospatiale - Acier X4CrNiMo16-5-1 - Élaboré à

l'air - Trempé et revenu - Tôles et plaques - 0,3 mm

 a  50 mm - 900 MPa  Rm  1 050 MPa

Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 -

Lufterschmolzen - Gehärtet- und angelassen - Bleche

und Platten - 0,3 mm  a  50 mm - 900 MPa  Rm 

1 050 MPa

This European Standard was approved by CEN on 13 March 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION

C OMITÉ EUR O P É EN DE NORMALI SATIO N

EURO P ÄISCH E S KOM I TEE FÜR N O RMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

All rights of exploitation in any form and by any means reserved

worldwide for CEN national Members.

Ref. No. EN 4890:2022 E

BS EN 4890:2022

北极星标准文库-高清标准规范分享平台 www.bjxwk.com

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #板材 #薄板 #钢

摘要：

BS EN 4890-2022 是航空航天领域专用标准，规定了 X4CrNiMo16-5-1 马氏体不锈钢经空气熔炼、淬火和回火处理后的板材与薄板的技术要求。该标准适用于厚度 a 在 0.3 毫米至 50 毫米之间的材料，并要求其抗拉强度 Rm 在 900 兆帕至 1050 兆帕之间。内容涵盖材料的化学成分、机械性能、热处理工艺及检验方法，旨在确保该钢种在航空结构件、发动机部件及高应力环境下的可靠性与耐腐蚀性。该文档为制造商、航空工程及质量检测人员提供关键技术依据。

展开>> 收起<<

BS EN 4890-2022 航空航天系列 X4CrNiMo16-5-1钢空气熔炼淬火和回火板材和薄板 0.3毫米 ≤ a ≤ 50毫米 900兆帕 ≤ Rm ≤ 1050兆帕.pdf

共12页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

BS EN 4890-2022 航空航天系列 X4CrNiMo16-5-1钢空气熔炼淬火和回火板材和薄板 0.3毫米 ≤ a ≤ 50毫米 900兆帕 ≤ Rm ≤ 1050兆帕

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

BS EN 4890-2022 航空航天系列 X4CrNiMo16-5-1钢 空气熔炼 淬火和回火 板材和薄板 0.3毫米 ≤ a ≤ 50毫米 900兆帕 ≤ Rm ≤ 1050兆帕

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

BS EN 4890-2022 航空航天系列 X4CrNiMo16-5-1钢空气熔炼淬火和回火板材和薄板 0.3毫米 ≤ a ≤ 50毫米 900兆帕 ≤ Rm ≤ 1050兆帕