沙特阿美公司工艺流程规范 SAEP-345-2019 设备用非金属复合材料修复系统 Non-Metallic Composite Repair Systems for Equipment

VIP专享
标准之家 2026-07-10 8 473.55KB 8 页 28星币
侵权投诉
Previous Issue: 16 January 2014 Next Planned Update: 27 February 2022
Page 1 of 8
Primary contact: Abdulaziz Y. Asiri on +966-13-8809549
Copyright©Saudi Aramco 2013. All rights reserved.
Engineering Procedure
SAEP-345 27 February 2019
Non-Metallic Composite Repair Systems for Equipment
Document Responsibility: Non-Metallic Standards Committee
Contents
1 Scope............................................................. 2
2 Conflicts and Deviations................................. 2
3 References..................................................... 2
4 Detailed Modification of ISO 24817……......... 3
5 Alignment of ASME PCC-2 with ISO
24817……………………….…….……………. 6
Document Responsibility: Non-Metallic Standards Committee SAEP-345
Issue Date: 27 February 2019
Next Planned Update: 27 February 2022 Non-Metallic Composite Repair Systems for Equipment
Saudi Aramco: Company General Use
©Saudi Aramco 2019. All rights reserved.
Page 2 of 8
1 Scope
1.1 This documentation establishes the minimum technical requirements and
recommendations for the qualifications, design, installation, testing and inspection
for the application of nonmetallic composite repair system to corroded or damaged
equipment. This specification is an addendum to all part of ISO 24817 which
covers composite repairs for equipment i.e. pipework, pipelines, tanks and vessels.
1.2 Composite repair is applicable to aboveground, buried, subsea and offshore topside
pipework’s and pipelines including downhole applications (surface casing only)
used in oil and gas industry.
1.3 The use of composite repair for tanks and vessels as outlined in ISO 24817 is
subjected to the approval of the Tank and Vessel Group of Consulting Services
Department.
1.4 This documentation also applies to repairs of both metallic and non-metallic
(substrate) pipe materials. A detailed summary of composite repair applicability is
stipulated in Section 5.
2 Conflicts and Deviations
Any conflicts between this document and other applicable Mandatory Saudi Aramco
Engineering Requirements (MSAERs) shall be addressed to the EK&RD Coordinator.
Any deviation from the requirements herein shall follow internal company procedure
SAEP-302.
3 References
The following references, which in force on the date of the Purchase Order form a
supplementary part of this specification, as applicable:
3.1 Saudi Aramco Engineering Procedure:
SAEP-310 Piping and Pipeline Repair
3.2 Industry Codes and Standards
American Society of Mechanical Engineers
ASME PCC-2 Repair of Pressure Equipment and Piping
Document Responsibility: Non-Metallic Standards Committee SAEP-345
Issue Date: 27 February 2019
Next Planned Update: 27 February 2022 Non-Metallic Composite Repair Systems for Equipmet
Saudi Aramco: Company General Use
©Saudi Aramco 2019. All rights reserved.
Page 3 of 8
4 Detailed Modifications of ISO 24817
The following paragraph numbers refer to ISO 24817, which is part of this
specification. The text in each paragraph below is an addition, exception, modification,
or deletion to ISO 24817 as noted. Paragraph numbers not appearing in ISO 24817 are
new addition to the document.
4.1 Summary of Modification of ISO 24817- 2017 Edition
Chapter
Number
Title
Remarks
Page
No.
Section 1
Scope……………….……………….……………
Modification
4
Section 2
Normative references………………….………
No Change
Section 3
Terms and definitions….................................
No Change
Section 4
Symbols and abbreviated terms…………….
No Change
Subs. 4.1
Symbols……………………………….…….....
No Change
Subs. 4.2
Abbreviated term……..…………………….….
No Change
Section 5
Applications…………………….………….……
Modification
4
Section 6
Summary of key issues
Section 7
Qualification and design……………….……..
Addition
5
Subs. 7.1
Repair feasibility assessment
No Change
Subs. 7.2
Repair class……………………………………
No Change
Subs. 7.3
Repair design lifetime…………………………
No Change
Subs. 7.4
Required data………………………………….
Modification
5
Subs. 7.5
Design methodology
Addition
6
Subs. 7.6
Re-qualification of the repair system
No Change
Section 8
Installation
Subs. 8.1
Storage conditions…………………………….
No Change
Subs. 8.2
Documentation prior to repair application….
No Change
Subs. 8.3
Installer qualifications…………………………
No Change
Subs. 8.4
Installation procedure…………………………
No Change
Subs. 8.5
Repair completion documentation…………..
No Change
Subs. 8.6
Live repairs…………………………………….
Modification
6
Subs. 8.7
Repair of clamps, piping components, tanks,
or vessels……………………………………….
No Change
Subs. 8.8
Environmental considerations………………..
Addition
6
Section 9
Testing and inspection
Subs. 9.1
General…………………………………………
No Change
Subs. 9.2
Allowable defects for the repair system…….
No Change
Subs. 9.3
Repair of defects within the repair system….
No Change
Subs. 9.4
Inspection methods……………………………
No Change
Subs. 9.5
Repair system maintenance and remedial
options………………………………………….
No Change
Section 10
System testing
No Change
Section 11
Decommissioning
No Change

标签： #金属 #修复 #复合材料

摘要：

本文档详细介绍了沙特阿美公司发布的工艺流程规范 SAEP-345-2019，专注于设备用非金属复合材料修复系统的技术标准与实施要求。该规范适用于石油、化工及能源行业中金属设备的非金属复合材料现场修复，涵盖材料选型、施工工艺、质量控制及验收准则，旨在确保修复后设备的耐腐蚀性、承压性能及长期可靠性。通过遵循此标准，可有效延长设备寿命、降低维护成本并提升运营安全性。内容对工程师、采购人员及项目管理者提供权威参考，助力合规性管理与技术决策优化。

展开>> 收起<<
沙特阿美公司工艺流程规范 SAEP-345-2019 设备用非金属复合材料修复系统 Non-Metallic Composite Repair Systems for Equipment.PDF

共8页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：标准之家 分类：国际标准 价格：28星币 属性：8 页 大小：473.55KB 格式：PDF 时间：2026-07-10

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 8
评分 收藏
分享
立即下载
客服
关注