SAE AMS 4471C-2025 铸造铝合金复合材料 4.6 Cu-3.4Ti-1.4B-0.75Ag-0.27Mg(A205.0TiB23p-T7P) 熔模铸造固溶和沉淀热处理

VIP专享

史蒂文 2026-07-19 7 178.15KB 9 页 30星币

__________________________________________________________________________________________________________________________________________

SAE Executive Standards Committee Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is

entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”

SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and

suggestions.

recording, or otherwise, or used for text and data mining, AI training, or similar technologies, without the prior written permission of SAE.

TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)

Tel: +1 724-776-4970 (outside USA)

Fax: 724-776-0790

Email: CustomerService@sae.org

SAE WEB ADDRESS: http://www.sae.org

For more information on this standard, visit

https://www.sae.org/standards/content/AMS4471C/

AEROSPACE

MATERIAL SPECIFICATION

AMS4471™

REV. C

Issued 2012-07

Revised 2021-04

Stabilized 2025-09

Superseding AMS4471B

Cast Aluminum Alloy Composite

4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P)

Investment Cast, Solution and Precipitation Heat Treated

RATIONALE

AMS4471C has been declared “STABILIZED” by AMS Committee D Nonferrous Alloys. This document will no longer be

updated and may no longer represent standard industry practice. This document was stabilized because Committee D can

find no producers for this document.

NOTE: Previously, this document was revised. The last technical update of this document occurred in April 2021. Users of

this document should refer to the cognizant engineering organization for disposition of any issues with

reports/certifications to the specification, including exceptions listed on the certification. In many cases, the

purchaser may represent a sub tier supplier and not the cognizant engineering organization.

STABILIZED NOTICE

AMS4471C has been declared “STABILIZED” by SAE AMS Committee AMS D Nonferrous Alloys and will no longer be

subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability of

technical requirements. Newer technology may exist.

SAE INTERNATIONAL AMS4471™C Page 1 of 8

1. SCOPE

1.1 Form

This specification covers a dilute aluminum/TiB2 metal matrix composite in the form of investment castings.

1.2 Application

These castings have been used typically for components requiring high strength and/or elevated temperature performance,

but usage is not limited to such applications.

1.3 Safety - Hazardous Materials

While the materials, methods, applications, and processes described or referenced in this specification may involve the use

of hazardous materials, this specification does not address the hazards which may be involved in such use. It is the sole

responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary

precautionary measures to ensure the health and safety of all personnel involved.

2. APPLICABLE DOCUMENTS

The issue of the following documents in effect on the date of the purchase order forms a part of this specification to the

extent specified herein. The supplier may work to a subsequent revision of a document unless a specific document issue is

specified. When the referenced document has been cancelled and no superseding document has been specified, the last

published issue of that document shall apply.

SAE INTERNATIONAL AMS4471™C Page 2 of 8

2.1 SAE Publications

Available from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel: 877-606-7323 (inside USA

and Canada) or +1 724-776-4970 (outside USA), www.sae.org.

AMS2175 Casting, Classification and Inspection of

AMS2360 Room Temperature Tensile Properties of Castings

AMS2694 In-Process Welding of Castings

AMS2771 Heat Treatment of Aluminum Alloy Castings

AMS2804 Identification, Castings

ARP1917 Clarification of Terms Used in Aerospace Metals Specifications

2.2 ASTM Publications

Available from ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959,

Tel: 610-832-9585, www.astm.org.

ASTM B557 Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

ASTM B557M Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)

ASTM E29 Using Significant Digits in Test Data to Determine Conformance with Specifications

ASTM E34 Chemical Analysis of Aluminum and Aluminum-Base Alloys

ASTM E155 Reference Radiographs for Inspection of Aluminum and Magnesium Castings

ASTM E716 Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of

Chemical Composition by Spark Atomic Emission Spectrometry

ASTM E1251 Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry

ASTM E1417/E1417M Liquid Penetrant Testing

ASTM E1742/E1742M Radiographic Examination

2.3 ANSI Accredited Publications

Copies of these documents are available online at http://webstore.ansi.org/.

ANSI H35.1/H35.1M Standard Alloy and Temper Designation System for Aluminum

3. TECHNICAL REQUIREMENTS

3.1 Composition

Shall conform to the percentages by weight shown in Table 1, determined by wet chemical methods in accordance with

ASTM E34, by spectrochemical methods in accordance with ASTM E1251, or by other analytical methods acceptable to

purchaser (see 3.4.1).

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载

标签： #铝合金 #合金 #热处理

摘要：

本页面提供 SAE AMS 4471C-2025 标准的技术内容详解，该标准规范了一种高性能铸造铝合金复合材料，其成分为 4.6% Cu、3.4% Ti、1.4% B、0.75% Ag 及 0.27% Mg（牌号 A205.0TiB23p-T7P），采用熔模铸造工艺并经过固溶与沉淀热处理（T7P状态）。该材料通过原位生成 TiB₂颗粒实现增强，显著提升强度、刚度与抗疲劳性能，同时保持优异的铸造流动性，适用于航空航天、军事及高端装备中需要轻量化与高可靠性的结构件。文档涵盖化学成分、力学性能、热处理

展开>> 收起<<

SAE AMS 4471C-2025 铸造铝合金复合材料 4.6 Cu-3.4Ti-1.4B-0.75Ag-0.27Mg(A205.0TiB23p-T7P) 熔模铸造固溶和沉淀热处理.pdf

共9页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

SAE AMS 4471C-2025 铸造铝合金复合材料 4.6 Cu-3.4Ti-1.4B-0.75Ag-0.27Mg(A205.0TiB23p-T7P) 熔模铸造固溶和沉淀热处理

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

SAE AMS 4471C-2025 铸造铝合金复合材料 4.6 Cu-3.4Ti-1.4B-0.75Ag-0.27Mg(A205.0TiB23p-T7P) 熔模铸造 固溶和沉淀热处理

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

SAE AMS 4471C-2025 铸造铝合金复合材料 4.6 Cu-3.4Ti-1.4B-0.75Ag-0.27Mg(A205.0TiB23p-T7P) 熔模铸造固溶和沉淀热处理