ANSI AWWA D106-20 钢制储水罐内部浸没表面的牺牲阳极阴极保护系统 2020

VIP专免

那山那人那狗 2026-07-31 17 2.07MB 36 页 22星币

侵权投诉

Ideal crop marks

Since 1881

Sacrificial Anode

Cathodic Protection

Systems for the Interior

Submerged Surfaces of

Steel Water Storage Tanks

Eﬀ ective date: Aug. 1, 2020.

First edition approved by Board of Directors June 20, 2010.

This edition approved April 20, 2020.

Approved by American National Standards Institute Feb. 4, 2020.

ANSI/AWWA D106-20

(Revision of ANSI/AWWA D106-16)

AWWA Standard

This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards

describe minimum requirements and do not contain all of the engineering and administrative information normally

contained in specifications. The AWWA standards usually contain options that must be evaluated by the user of the

standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA publication

of a standard does not constitute endorsement of any product or product type, nor does AWWA test, certify, or approve

any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence

over or displace any applicable law, regulation, or codes of any governmental authority. AWWA standards are intended

to represent a consensus of the water industry that the product described will provide satisfactory service. When AWWA

revises or withdraws this standard, an official notice of action will be placed in the Official Notice section of Journal AWWA

Association. The action becomes effective on the first day of the month following the month of Journal AWWA publication

of the official notice.

American National Standard

An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An

American National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The

existence of an American National Standard does not in any respect preclude anyone, whether that person has approved

the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not

conforming to the standard. American National Standards are subject to periodic review, and users are cautioned to obtain

the latest editions. Producers of goods made in conformity with an American National Standard are encouraged to state

on their own responsibility in advertising and promotional materials or on tags or labels that the goods are produced in

conformity with particular American National Standards.

Caution Notice: The American National Standards Institute (ANSI) approval date on the front cover of this standard indicates

completion of the ANSI approval process. This American National Standard may be revised or withdrawn at any time. ANSI

procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date

of ANSI approval. Purchasers of American National Standards may receive current information on all standards by calling

or writing the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036; 212.642.4900;

or e-mailing info@ansi.org.

ISBN-13, print: 978-1-64717-013-4 ISBN-13, electronic: 978-1-61300-553-8

DOI: http://dx.doi.org/10.12999/AWWA.D106.20

electronic or mechanical, including scanning, recording, or any information or retrieval system. Reproduction and

commercial use of this material is prohibited, except with written permission from the publisher.

Printed in USA

reproduced or transmitted in any form or by any means,

electronic or mechanical, including scanning, recording, or any

information or retrieval system. Reproduction and commercial

use of this material is prohibited, except with written permission

from the publisher. Please send any requests or questions to

permissions@awwa.org.

iii

Committee Personnel

The AWWA Cathodic Protection Task Force, which developed this standard, had the following

personnel at the time:

David H. Kroon, Chair

Miles Steele, Vice Chair

C.W. Dessens, City of Houston, Houston, Tex.

C.C. Johnson, Coffman Engineers Inc., San Diego, Calif.

D.H. Kroon, Aegion Corporation, Houston, Tex.

M.P. Parker, Statewide Aquastore Inc., East Syracuse, N.Y.

L.D. Scott, Tank Industry Consultants, Atascadero, Calif.

M. Steele, Aegion Corporation, Atlanta, Ga.

G.R. Stein, Tank Industry Consultants, Indianapolis, Ind.

J.D. Wicoff, Tank Connection, Rogers, Ark.

C. Xiao, City of Phoenix, Phoenix, Ariz.

The Standards Committee on Steel and Composite Water Storage Tanks, which reviewed and

approved this standard, had the following personnel at the time of approval:

Gregory R. Stein, Chair

User Members

J. Camarena, East Bay Municipal Utility District, Oakland, Calif.

T. M. Dawson, Emerald Coast Utilities Authority, Pensacola, Fla.

M.F. Gaffey, Naval Facilities Expeditionary Warfare Center, Washington Navy Yard, D.C.

N.J. Meder, Connecticut Water Co., Clinton, Conn.

R.B. Potts, Louisville Water Company, Louisville, Ky.

G. Terrell, Birmingham Water Works Board, Birmingham, Ala.

C. Xiao, City of Phoenix, Phoenix, Ariz.

General Interest Members

D.M. Algranti, Albert A. Webb Associates, Riverside, Calif.

J.W. Birkhoff, Birkhoff, Hendricks & Carter LLP, Dallas, Tex.

J.D. Brock, Consulting Services Logistics, Toledo, Ohio

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #钢

摘要：

This standard provides comprehensive guidelines for the design, installation, and operation of sacrificial anode cathodic protection systems specifically intended for the internal submerged surfaces of steel water storage tanks, as established by the

展开>> 收起<<

ANSI AWWA D106-20 钢制储水罐内部浸没表面的牺牲阳极阴极保护系统 2020.pdf

共36页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

ANSI AWWA D106-20 钢制储水罐内部浸没表面的牺牲阳极阴极保护系统 2020

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: