ASPE PEDH VOL-2 管道工程设计手册 第2卷 管道系统 2018 Plumbing Engineering Design Handbook - Plumbing Systems

VIP专免
公子舒夜 2026-08-11 11 12.18MB 342 页 22星币
侵权投诉
6400 Shafer Court, Suite 350
Rosemont, IL 60018
Plumbing
Engineering
Design
Handbook
A Plumbing Engineer’s Guide to System Design and Specifications
VOLUME TWO
Plumbing Systems
Copyright © 2018 by American Society of Plumbing Engineers. All rights reserved, including rights of reproduction and use in any form or by any means, including the making
of copies by any photographic process, or by any electronic or mechanical device, printed or written or oral, or recording for sound or visual reproduction, or for use in any
knowledge or retrieval system or device, unless permission in writing is obtained from the publisher.
The ASPE Plumbing Engineering Design Handbook is designed to provide accurate and authoritative information for the design and specication of plumbing systems. The
publisher makes no guarantees or warranties, expressed or implied, regarding the data and information contained in this publication. All data and information are provided with
the understanding that the publisher is not engaged in rendering legal, consulting, engineering, or other professional services. If legal, consulting, or engineering advice or other
expert assistance is required, the services of a competent professional should be engaged.
ISBN 978-1-891255-45-8
Printed in the United States
10 9 8 7 6 5 4 3 2 1
VOLUME 1: FUNDAMENTALS OF PLUMBING
ENGINEERING
Chapter 1: Formulas, Symbols, and Terminology
Chapter 2: Standards for Plumbing Materials and Equipment
Chapter 3: Specifications
Chapter 4: Plumbing Cost Estimation
Chapter 5: Job Preparation, Drawings, and Field Checklists
Chapter 6: Plumbing for People with Disabilities
Chapter 7: Energy and Resource Conservation in Plumbing
Chapter 8: Corrosion
Chapter 9: Seismic Protection of Plumbing Systems
Chapter 10: Acoustics in Plumbing
Chapter 11: Basics of Value Engineering
Chapter 12: Ensuring High-Quality Plumbing Installations
Chapter 13: Existing Building Job Preparation
Chapter 14: Building Information Modeling
VOLUME 2: PLUMBING SYSTEMS
Chapter 1: Sanitary Drainage Systems
Chapter 2: On-Site Wastewater Reuse
Chapter 3: Vents and Venting Systems
Chapter 4: Storm Drainage Systems
Chapter 5: Cold Water Systems
Chapter 6: Domestic Water Heating Systems
Chapter 7: Fuel Gas Piping Systems
Chapter 8: Private On-Site Wastewater Treatment Systems
Chapter 9: Private Water Wells
Chapter 10: Vacuum Systems
Chapter 11: Water Treatment, Conditioning, and Purification
Chapter 12: Special Waste Drainage Systems
Chapter 13: Rainwater and Stormwater Harvesting
VOLUME 3: SPECIAL PLUMBING SYSTEMS
Chapter 1: Fire Protection Systems
Chapter 2: Plumbing Design for Healthcare Facilities
Chapter 3: Treatment of Industrial Waste
Chapter 4: Irrigation Systems
Chapter 5: Reflecting Pools and Fountains
Chapter 6: Public Swimming Pools
Chapter 7: Gasoline and Diesel Oil Systems
Chapter 8: Steam and Condensate Piping
Chapter 9: Compressed Air Systems
Chapter 10: Solar Energy Systems
Chapter 11: Site Utility Systems
Chapter 12: Laboratory Gases
VOLUME 4: PLUMBING COMPONENTS AND
EQUIPMENT
Chapter 1: Plumbing Fixtures
Chapter 2: Piping Systems
Chapter 3: Valves
Chapter 4: Pumps
Chapter 5: Piping Insulation
Chapter 6: Hangers and Supports
Chapter 7: Vibration Isolation
Chapter 8: Grease Interceptors
Chapter 9: Cross-Connection Control
Chapter 10: Water Treatment
Chapter 11: Thermal Expansion
Chapter 12: Potable Water Coolers and Central Water Systems
Chapter 13: Bioremediation Pretreatment Systems for Fats, Oils,
and Grease
Chapter 14 : Green Plumbing
6400 Shafer Court, Suite 350, Rosemont, IL 60018
(847) 296-0002 • Fax: (847) 296-2963
info@aspe.org • www.aspe.org
American Society of Plumbing Engineers
Plumbing Engineering Design Handbook
53 Chapters in 4 Volumes
(The chapters and subjects listed for these volume are subject to modification, adjustment, and change. The contents
shown for each volume are proposed and may not represent the final contents of the volume. A final listing of included
chapters for each volume will appear in the actual publication.)
Plumbing Engineering Design Handbook
Volume 2: Plumbing Systems
CONTRIBUTORS
CHAPTER 1:
Sanitary Drainage Systems
Paul Baker, PE, CPD, GPD
Kurt Bramstedt
Patrick L. Giordano, CPD, LEED Green Associate,
CFPS
Mitchell L. Weiss, PE, LEED Green Associate
CHAPTER 2:
On-Site Wastewater Reuse
Jeffrey Cordell II, CPD, GPD
Thura Zin, CPD, GPD
CHAPTER 3:
Vents and Venting Systems
Paul Baker, PE, CPD, GPD
David E. DeBord, CPD, GPD, LEED AP BD+C,
ARCSA AP, CFPS, FASPE
Leonard Hovander, PE, CPD, LEED AP, HFDP
Steven Skattebo, PE
CHAPTER 4:
Storm Drainage Systems
Julius A. Ballanco, PE, CPD, FASPE
Aaron Bock, PE, CPD, GPD, LEED AP BD+C, EDAC
Brennan Doherty
Bill Ross
Frank Sanchez, CPD, GPD
CHAPTER 5:
Cold Water Systems
Paul Baker, PE, CPD, GPD
Tracy Bethel, CPD, LEED AP
Adrian Enache, PE, CPD
Larisa Miro, CPD
David P. Carrier
CHAPTER 6:
Domestic Water Heating Systems
Paul Baker, PE, CPD, GPD
Kurt Bramstedt
Steven Dolejsi, P.Eng.
Paul G. Galvin
Stephen Ziga, CPD, SET, CFPS
CHAPTER 7:
Fuel Gas Piping Systems
Pramod Maheshwari, MS, PE, GPD
Gregory Riley, PE, CPD
Eric P. Rogers, PE
CHAPTER 8:
Private On-Site Wastewater Treatment Systems
Douglas J. Nelson, PE, GPD
April Ricketts, PE, CPD
CHAPTER 9:
Private Water Wells
Douglas J. Nelson, PE, GPD
Daniel Murphy, PE, CPD
Stephen Ziga, CPD, SET, CFPS
CHAPTER 10:
Vacuum Systems
Sarah A. Balz, PE, CPD, GPD, LEED AP
Christopher Malanga, PE, CPD
CHAPTER 11:
Water Treatment, Conditioning, and Purification
Anthony J. Curiale, CPD, LEED AP, FASPE
James Dipping, PE, CPD, LEED AP BD+C,
ARCSA AP
Brian Hagopian, CPIP
CHAPTER 12:
Special Waste Drainage Systems
Steven Dolejsi, P.Eng.
Paul G. Galvin
Karl Yrjanainen, PE, CPD, LEED AP BD+C
Stephen Ziga, CPD, SET, CFPS
CHAPTER 13:
Rainwater and Stormwater Harvesting
Charlie Lengal III, CxA, QCP, CPD, CCCA, GPD
Frank Sanchez, CPD, GPD
Editor: Gretchen Pienta | Graphic Designer: Nadine Saucedo
2016–2018 ASPE Vice President, Technical: David E. DeBord, CPD, GPD, LEED AP BD+C, ARCSA AP, CFPS, FASPE

标签： #工程 #管 #管道系统

摘要：

《ASPE PEDH VOL-2 管道工程设计手册 第2卷：管道系统》是2018年由美国管道工程师协会（ASPE）发布的权威专业参考书，专注于建筑给排水及管道系统设计的完整知识体系。本卷深入涵盖管道材料选择、水力计算、系统布局、压力管理、热膨胀与支撑、噪音控制、腐蚀防护及维护检修等核心工程实践，并结合现代可持续设计与智能建筑需求，提供系统化设计准则与最新行业标准。作为ASPE管道工程设计系列的重要组成，第2卷为工程师、设计师、施工方及建筑相关专业人员提供了从概念规划到最终验收的全流程技术指导，尤

展开>> 收起<<
ASPE PEDH VOL-2 管道工程设计手册 第2卷 管道系统 2018 Plumbing Engineering Design Handbook - Plumbing Systems.pdf

共342页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：公子舒夜 分类：专业资料 价格：22星币 属性：342 页 大小：12.18MB 格式：PDF 时间：2026-08-11

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 342
评分 收藏
分享
立即下载 VIP免费下载
客服
关注