BS EN 60754-2-2014 + A1-2020 酸度（用pH测量）和电导率的测定

VIP专免

史蒂文 2026-09-13 6 1.86MB 26 页 25星币

侵权投诉

BSI Standards Publication

Test on gases evolved during combustion

of materials from cables

Part 2: Determination of acidity (by pH measurement) and conductivity

BS EN 60754‑2:2014+A1:2020

EUROPEAN STANDARD

NORME EUROPÉENNE

EUROPÄISCHE NORM

EN 60754-2:2014+A1

March 2020

CENELEC

European Committee for Electrotechnical Standardization

Comité Européen de Normalisation Electrotechnique

Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels

All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60754-2:2014 E

ICS 13.220.40; 29.020; 29.060.20

Supersedes EN 50267-1:1998 (partially), EN 50267-2-1:1998 (partially), EN 50267-2-2:1998

(partially), EN 50267-2-3:1998 (partially)

English version

Test on gases evolved during combustion of materials from cables -

Part 2: Determination of acidity (by pH measurement) and conductivity

(IEC 60754-2:2011)

Essai sur les gaz émis lors de la

combustion des matériaux prélevés

sur câbles

Partie 2: Détermination de la conductivité

et de l‘acidité (par mesure du pH)

(CEI 6

0754-2:2011)

Prüfung der bei der Verbrennung der

Werkstoffe von Kabeln und isolierten

Leitungen entstehenden Gase

Teil 2: Bestimmung der Azidität (durch

Messung des pH

-Wertes) und

Leitfähigkeit

(IEC 60754-2:2011)

This European Standard was approved by CENELEC on 2014-01-27. CENELEC members are bound to comply

with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CENELEC member into its own language and notified

to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,

the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,

Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,

Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

National foreword

This British Standard is the UK implementation of

EN 60754‑2:2014+A1:2020. It is identical to IEC 60754‑2:2011,

incorporating amendment 1:2019. It supersedes BS EN 60754‑2:2014,

which will be withdrawn on 30 December 2022.







 .

The UK participation in its preparation was entrusted to Technical

Committee GEL/20/18, Electric Cables ‑ Fire testing.

A list of organizations represented on this committee can be obtained on





of a contract. Users are responsible for its correct application.



ISBN 978 0 539 01012 1

ICS 13.220.40; 29.020; 29.060.20

Compliance with a British Standard cannot confer immunity from

legal obligations.





Amendments/corrigenda issued since publication

Date 

30 April 2020 Implementation of IEC amendment 1:2019 with

CENELEC endorsement A1:2020

BRITISH STANDARD