沙特阿美公司材料系统规范 34-SAMSS-611 泄压装置 2019 Pressure Relief Devices

VIP专享

标准之家 2026-09-13 6 599.98KB 10 页 26星币

侵权投诉

Previous Issue: 31 May 2016 Next Planned Update: 23 May 2024

Page 1 of 10

Contact: Farooq, Ghulam (farooqgx) on +966-13-8800687

Saudi Aramco: Company General Use

Materials System Specification

34-SAMSS-611 23 May 2019

Pressure Relief Devices

Document Responsibility: Instrumentation Standards Committee

Contents

1 SCOPE ................................................................... 2

2 CONFLICTING REQUIREMENTS ........................... 2

3 REFERENCES ........................................................ 2

4 PART-I: FLANGED STEEL PRESSURE-RELIEF

VALVES (API-526) .................................................. 4

6 ORIFICE AREAS AND DESIGNATIONS (API-526 -

CLARIFICATION) ........................................................ 5

7 DESIGN (API-526) .................................................. 5

8 MATERIAL (API-526) .............................................. 6

9 INSPECTION AND SHOP TESTS (API-526-

ADDITION) ................................................................... 6

10 PREPARATION FOR SHIPMENT (API-526) ........... 8

PART-II RUPTURE DISKS AND BUCKLING PIN

DEVICES ...................................................................... 8

PART-III VACUUM AND LOW PRESSURE

RELIEF VALVES (AS PER API-2000). .......................... 8

REVISION SUMMARY ................................................ 10

Document Responsibility: Instrumentation Standards Committee 34-SAMSS-611

Issue Date: 23 May 2019

Next Planned Update: 31 May 2024 Pressure Relief Devices

Saudi Aramco: Company General Use

Page 2 of 10

Saudi Aramco: Company General Use

1 Scope

This specification together with Buyer's Quotation Request or purchase order,

applicable Instrument Specification Sheets (SA-8020-611, SA-8020-612, SA-8020-613)

and Inspection requirements (175-341800, 175-341900) define the minimum mandatory

technical and testing requirements for Conventional, Balanced Bellows, Pilot-operated

and low pressure industrial safety relief valves. Moreover, with Buyer's Quotation

Request or purchase order, applicable Instrument Specification Sheets (SA-8020-614)

and Inspection requirements, it is applicable for rupture disks and buckling pin devices.

Part-I (Section 4-10) of this specification is applicable for the Conventional, Balanced

Bellows and Pilot-operated Industrial safety relief valves with Set pressure greater than

15 Psig, which shall adhere to the requirements of API-520, API-521, API-526, ASME

SEC VIII-D1 or ASME SEC-I, as applicable.

Part-II of this specification is applicable to the rupture disks and buckling pin devices,

which shall adhere to the requirements of ASME SEC-VIII-D1, as applicable.

Part-III of this specification is applicable to the Low Pressure and Vacuum relief

devices, which shall adhere to the requirements of API-2000, API-620 and API-650 as

applicable.

2 Conflicting Requirements

Any conflicts between this document and other applicable Mandatory Saudi Aramco

Engineering Requirements (MSAERs) shall be addressed to the EK&RD Coordinator.

Any deviation from the requirements herein shall follow internal company procedure

SAEP-302.

3 References

Material or equipment supplied to this specification shall comply with the latest edition

of the references listed below unless otherwise noted.

3.1 Saudi Aramco Documents

Saudi Aramco Engineering Procedure

SAEP-302 Waiver of a Mandatory Saudi Aramco Engineering

Requirement

Document Responsibility: Instrumentation Standards Committee 34-SAMSS-611

Issue Date: 23 May 2019

Next Planned Update: 31 May 2024 Pressure Relief Devices

Saudi Aramco: Company General Use

Page 3 of 10

Saudi Aramco: Company General Use

Saudi Aramco Inspection Requirements Form

175-341800 Safety Relief Valves, Vacuum and Low Pressure

175-341900 Safety Relief Valves Conventional, Balanced and

Pilot Types

Saudi Aramco Non-material Requirements

Form SA-7907 Non-Material Requirements for Instrumentation

(general)- Safety Relief Valves

Saudi Aramco Forms and Data Sheets

SA-8020-611 Instrument Specification Sheet - Pressure Relief

Valves Conventional and Balanced Types

SA-8020-612 Instrument Specification Sheet - Pressure Relief

Valves Pilot Operated

SA-8020-613 Instrument Specification Sheet- Pressure-Vacuum

Relief Valves

SA-8020-614 Instrument Specification Sheet - Rupture Disks and

Buckling Pin Devices

3.2 Industry Codes and Standards

American Petroleum Institute

API STD 520 Sizing, Selection, and Installation of Pressure -

Relieving Devices

Part I - Sizing and Selection

Part II – Installation

API STD 521 Pressure Relieving and Depressuring Systems

API STD 526 Flanged Steel Pressure Relief Valves

API STD 527 Seat Tightness of Pressure Relief Valves

API STD 620 Design and Construction of Large, Welded, Low-

pressure Storage Tanks

API STD 650 Welded Tanks for Oil Storage

API STD 2000 Venting Atmospheric and Low-Pressure Storage

Tanks

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载

标签： #MS #泄压装置 #材料

摘要：

沙特阿美公司材料系统规范 34-SAMSS-611《泄压装置》（Pressure Relief Devices）2019版，是沙特阿美石油、天然气及石化项目在泄压阀、安全阀、爆破片等压力泄放设备设计、选型、材料、制造、检验、试验和交付验收中常引用的重要技术规范。本内容围绕 34-SAMSS-611:2019 的适用范围、核心条款、合规要点及 Pressure Relief Devices 相关要求进行整理，便于工程师、采购人员、供应商和质量管理人员快速检索并理解该规范。实际用于投标、设计或制造时

展开>> 收起<<

沙特阿美公司材料系统规范 34-SAMSS-611 泄压装置 2019 Pressure Relief Devices.pdf

共10页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

沙特阿美公司材料系统规范 34-SAMSS-611 泄压装置 2019 Pressure Relief Devices

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: