沙特阿美公司材料系统规范 34-SAMSS-711 控制阀 2020 Control Valves

VIP专免

标准之家 2026-09-13 6 464.23KB 26 页 25星币

侵权投诉

Previous Issue: 11 October 2017 Next Planned Update: 11 October 2022

Page 1 of 26

Contact: Nisar, Syed Mohammed (nisarsm) on phone +966-13-8801289

Saudi Aramco: Company General Use

Materials System Specification

34-SAMSS-711 16 January 2020

Control Valves

Document Responsibility: Instrumentation Standards Committee

Contents

1 Scope .................................................................. 2

2 Conflicts and Deviations ...................................... 2

3 References .......................................................... 2

4 Environmental Conditions .................................... 6

5 Information Required with Quotation ................... 6

6 Materials, Design, Fabrication, and Assembly ..... 7

7 Noise Level Requirements ................................. 21

8 Marking and Name Plate ................................... 22

9 Painting .............................................................. 23

10 Documentation .................................................. 23

11 Inspection and Testing Requirements ............... 23

12 Requirements for Shipment ............................... 25

Revision Summary .................................................... 26

Document Responsibility: Instrumentation Standards Committee 34-SAMSS-711

Issue Date: 16 January 2020

Next Planned Update: 11 October 2022 Control Valves

Page 2 of 26

Saudi Aramco: Company General Use

1 Scope

This specification, together with the Purchase Order, applicable Instrument

Specification Sheet (ISS) and Inspection Requirements define the minimum mandatory

requirements for the design, sizing, and selection of steel control valves and regulators

up to and including Class 2500 ratings. This specification is not applicable to on/off

isolation valves including Emergency Isolation Valve (EIV) and SMART ZV’s.

This specification is applicable for the control valves that are used in on/off service or

interlock applications.

2 Conflicts and Deviations

Any conflicts between this document and other applicable Mandatory Saudi Aramco

Engineering Requirements (MSAERs) shall be addressed to the EK&RD Coordinator.

Any deviation from the requirements herein shall follow internal company procedure

SAEP-302.

3 References

Material or equipment supplied to this specification shall comply with the latest edition

of the references listed below, unless otherwise noted.

3.1 Saudi Aramco References

Saudi Aramco Engineering Procedure

SAEP-302 Instructions for Obtaining a Waiver of a Mandatory

Saudi Aramco Engineering Requirement

Saudi Aramco Engineering Standards

SAES-A-102 Ambient Air Quality and Source Emission Standard

SAES-A-206 Positive Material Identification

Saudi Aramco Material Specification

34-SAMSS-716 Electric Motor Operated Valve Actuators

Saudi Aramco Non-material Requirements

NMR-7925 Non-material Requirements for Valves - All Types

Saudi Aramco Inspection Requirements

Document Responsibility: Instrumentation Standards Committee 34-SAMSS-711

Issue Date: 16 January 2020

Next Planned Update: 11 October 2022 Control Valves

Page 3 of 26

Saudi Aramco: Company General Use

175-340100 VALVES: Control, Steel, General Service, Pneumatic

Operated- Up to and including Class 2500 Ratings

175-340150 VALVES: Control, Non-general Service

3.2 Industry Codes and Standards

Fluid Controls Institute, Inc.

FCI 70-2 Control Valve Seat Leakage

FCI 70-3 Regulator Seat Leakage

American Petroleum Institute

API STD 607 Testing of Valves - Fire Type-testing Requirements

API STD 609 Butterfly Valves, Double Flanged Lug,

and Wafer-type

American Society of Mechanical Engineers

ASME B16.5 Pipe Flanges and Flanged Fittings

ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves

ASME B16.34 Valves - Flanged, Threaded, and Welding End

ASME B31.3 Process Piping

ASME B46.1 Surface Texture (Surface Roughness, Waviness, and

Lay)

ASME SEC VIII D1 Rules for Construction of Pressure Vessels

American Society for Testing and Materials

ASME B16.47 Large Diameter Steel Flanges NPS 26 through

NPS 60 Metric/Inch Standard

ASME SEC IX Welding, Brazing, and Fusing Qualifications

American Society for Testing and Materials

ASTM A216 Standard Specification for Steel Castings,

Carbon, Suitable for Fusion Welding,

for High-temperature Service

ASTM A217 Standard Specification for Steel Castings,

Martensitic Stainless and Alloy, for Pressure-

containing Parts, Suitable for High-temperature

Service

ASTM A351 Standard Specification for Castings, Austenitic,

for Pressure-containing Parts

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #控制阀 #阀 #MS

摘要：

沙特阿美公司材料系统规范 34-SAMSS-711 控制阀 2020 Control Valves（Saudi Aramco Materials System Specification 34-SAMSS-711 Control Valves 2020）是沙特阿美控制阀相关项目设计、选型、采购、制造、检验、试验和交付的重要技术规范。它适用于石油、天然气、炼化及工业设施中的控制阀应用，涵盖阀门本体、执行机构、附件、材料、压力等级、性能、标识、包装和质量文件等要求，帮助工程师、采购人员、承包商和供应

展开>> 收起<<

沙特阿美公司材料系统规范 34-SAMSS-711 控制阀 2020 Control Valves.pdf

共26页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

沙特阿美公司材料系统规范 34-SAMSS-711 控制阀 2020 Control Valves

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: