沙特阿美公司材料系统规范 12-SAMSS-018 固定式海上平台结构钢板、轧制型材及管材规范 2020

VIP专免

标准之家 2026-09-13 6 382.96KB 16 页 25星币

侵权投诉

Previous Issue: 4 October 2018 Next Planned Update: 4 October 2023

Page 1 of 16

Contact: (kimcx)

Saudi Aramco: Company General Use

Materials System Specification

12-SAMSS-018 18 November 2020

Structural Plates, Rolled Shapes and

Tubulars Specification for Fixed Offshore Platforms

Document Responsibility: Materials Engineering Standards Committee

Contents

1 Scope ................................................................ 2

2 Conflicts and Deviations ................................... 2

3 References ........................................................ 2

4 Steel .................................................................. 4

5 Tolerances ...................................................... 10

6 Quality Requirements ..................................... 10

7 Material Marking ............................................. 11

Revision Summary ................................................. 12

Appendix A – Material Substitution

to API/ASTM Materials ..................... 14

Document Responsibility: Materials Engineering Standards Committee 12-SAMSS-018

Issue Date: 18 November 2020 Structural Plates, Rolled Shapes, and

Next Planned Update: 4 October 2023 Tubulars Specification for Fixed Offshore Platforms

Saudi Aramco: Company General Use

Page 2 of 16

Saudi Aramco: Company General Use

1 Scope

1.1 This specification defines the grades of carbon steel plates, rolled shapes, and

tubulars that must be used for the design and construction of a fixed offshore

platform in accordance with API RP 2A-WSD. It gives additional minimum

requirements for the manufacture and supply of this material. It also gives

acceptable substitute materials. Substitute material must still meet the additional

requirements given in this specification.

1.2 Additional requirements may be contained in Scopes of Work, Drawings, or

other Instructions or Specifications pertaining to specific items of work.

1.3 This standard may be attached to and made a part of purchase orders.

1.4 High Frequency Welded (HFW) pipes are not permitted for offshore structure.

2 Conflicts and Deviations

2.1 Any conflicts between this document and other applicable Mandatory Saudi

Aramco Engineering Requirements (MSAERs) shall be addressed to the

EK&RD Coordinator.

Any deviation from the requirements herein shall follow internal company

procedure SAEP-302.

2.2 Whenever material requirements are specified, the Vendor may propose, in his

bid, equivalent materials with technical proof that the proposed alternative

material specifications fully meet the technical and environmental requirements,

for consideration by the Buyer.

3 References

The selection of material covered by this specification shall comply with the latest

edition of the references listed below, unless otherwise noted.

3.1 Saudi Aramco References

Saudi Aramco Engineering Procedure

SAEP-302 Waiver of a Mandatory Saudi Aramco Engineering

Requirement

Saudi Aramco Engineering Standard

Document Responsibility: Materials Engineering Standards Committee 12-SAMSS-018

Issue Date: 18 November 2020 Structural Plates, Rolled Shapes, and

Next Planned Update: 4 October 2023 Tubulars Specification for Fixed Offshore Platforms

Saudi Aramco: Company General Use

Page 3 of 16

Saudi Aramco: Company General Use

SAES-M-005 Design and Construction of Fixed Offshore Platforms

Saudi Aramco Materials System Specification

12-SAMSS-005 Marking of Metal Products

Saudi Aramco Inspection Requirement

Form 175-121400 Structural Plates, Rolled Shapes, and Tubulars

Specification for Fixed Offshore Platforms

3.2 Industry Codes and Standards

American Petroleum Institute

API RP 2A-WSD Planning, Designing and Constructing Fixed

Offshore Platforms

API SPEC 2B Specification for the Fabrication of Structural Steel

Pipe

API SPEC 2H Specification for Carbon Manganese Steel Plate for

Offshore Platform Tubular Joints

API SPEC 2W Specification for Steel Plates for Offshore Structures

Produced by Thermo-Mechanical Control

Processing (TMCP)

API SPEC 5L Specification for Line Pipe

API RP 2Z Preproduction Qualification for Steel Plates for

Offshore Structures

American Society for Testing and Materials

ASTM A6 General Requirements for Delivery of Structural

Steel

ASTM A370 Mechanical Testing of Steel Products

ASTM A673 Sampling Procedure for Impact Testing of

Structural Steel

ASTM E23 Notch Bar Testing of Metallic Materials

European Standard

EN 10225 Weldable Structural Steels for Fixed Offshore

Structures

EN10025-1 Hot Rolled Products of Structural Steels -

Part 1 General technical delivery conditions

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #钢 #钢板 #结构钢

摘要：

本页面介绍沙特阿美公司材料系统规范 12-SAMSS-018《固定式海上平台结构钢板、轧制型材及管材规范》2020版，涵盖固定式海上平台用结构钢板、轧制型材和管材的材料选用、化学成分、力学性能、制造工艺、检验试验、标记、包装及验收要求，适用于海洋油气工程的结构设计、采购、建造与质量控制。通过本规范可帮助承包商、供应商和工程技术人员快速查找合规依据，确保海上平台结构材料满足沙特阿美项目安全与耐久性标准。

展开>> 收起<<

沙特阿美公司材料系统规范 12-SAMSS-018 固定式海上平台结构钢板、轧制型材及管材规范 2020.pdf

共16页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

沙特阿美公司材料系统规范 12-SAMSS-018 固定式海上平台结构钢板、轧制型材及管材规范 2020

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: