沙特阿美公司材料系统规范 32-SAMSS-009 通用汽轮机 2019 General Purpose Steam Turbines

VIP专免

标准之家 2026-09-13 6 309.81KB 15 页 25星币

侵权投诉

Previous Issue: 24 July 2014 Next Planned Update: 12 September 2024

Page 1 of 15

Contact: Khowaiter, Abdulrahman O (KHOWAO0B) on +966-13-8809703

Materials System Specification

32-SAMSS-009 12 September 2019

General Purpose Steam Turbines

Document Responsibility: Compressors, Gears and Steam Turbines Standards

Committee

Contents

1 Scope ...................................................... 2

2 Normative References ............................. 2

5 Requirements .......................................... 3

6 Basic Design ............................................ 4

7 Accessories ............................................. 9

8 Inspection, Testing and Preparation for

Shipment ............................................. 14

9 Vendor's Data ........................................ 14

Revision Summary ...................................... 15

Document Responsibility: Compressors, Gears and Steam Turbines Standards Committee 32-SAMSS-009

Issue Date: 12 September 2019

Next Planned Update: 12 September 2024 General Purpose Steam Turbines

Page 2 of 15

The following paragraph numbers refer to API STD 611, Fifth Edition, March 2008,

which is part of this Specification. The text in each paragraph below is an addition to

API STD 611 unless it is noted otherwise (e.g., exception). Paragraph numbers not

appearing in API STD 611 are new paragraphs inserted in numerical order.

1 Scope

(Modification) This Specification, together with the Data Sheet (2811-ENG or 2811-M-

ENG) and Purchase Order, defines the mandatory requirements for general-purpose

steam turbines rated above 220 kW (300 HP). General-purpose steam turbines with lower

power rating do not have to meet this specification but shall comply with API STD 611.

General-purpose steam turbine driven equipment shall be spared or shall not be critical

to plant operation. General-purpose steam turbines shall not be used for any of the

following applications (these applications require special-purpose steam turbines):

 Having a rated power exceeding 2250 kW (3000 HP).

 Having a maximum continuous speed (MCS) exceeding 6,000 RPM.

 Having steam conditions exceeding a pressure of 4,800 kPa Gauge (700 psig) and a

temperature of 400°C (750°F).

 Driving a centrifugal process gas compressor.

 Driving an axial compressor.

General-purpose steam turbines shall be supplied by Vendors qualified by experience in

manufacturing the units proposed. To qualify, the Vendor or his licensee must have

manufactured at the proposed manufacturing facility at least two turbines of comparable

speed, power rating and steam inlet conditions. The turbines must have been in

continuous service for at least one year and must be performing satisfactorily.

Turbines manufactured under a license agreement shall carry the licensor’s written

guarantee.

2 Normative References

Material or equipment supplied to this Specification shall also comply with the

references listed below:

2.1 Saudi Aramco References

Saudi Aramco Engineering Procedures

SAEP-302 Waiver of a Mandatory Saudi Aramco Engineering

Requirement

Document Responsibility: Compressors, Gears and Steam Turbines Standards Committee 32-SAMSS-009

Issue Date: 12 September 2019

Next Planned Update: 12 September 2024 General Purpose Steam Turbines

Page 3 of 15

Saudi Aramco Inspection Requirements

Form 175-320200 Turbines, Steam General or Special Purpose

Saudi Aramco Forms and Data Sheets

2811-ENG & Steam Turbine Data Sheet

2811-M-ENG

2.2 Industry Codes and Standards

American Petroleum Institute

API STD 611 General-Purpose Steam Turbines for Refinery

Service

API STD 671 Special-Purpose Couplings for Petroleum,

Chemical, and Gas Industry Services

American Society of Mechanical Engineers

ASME SEC VIII BPVC Section VIII Rules for Construction of

Pressure Vessels

ASME B31.3 Process Piping

American Bearing Manufacturers Association

ABMA 7 Shaft and Housing Fits for Metric Radial Ball and

Roller Bearings (Except Tapered Roller

Bearings) Conforming to Basic Boundary Plan

National Electrical Manufacturers Association

NEMA RN 1 Polyvinyl-Chloride (PVC) Externally Coated

Galvanized Rigid Steel Conduit and Intermediate

Metal Conduit

NEMA SM 23 Steam Turbines for Mechanical Drive Service

5 Requirements

5.3 Conflicting Requirements

(Exception) Any conflict between this and other applicable Mandatory Saudi

Aramco Engineering Requirements (MSAERs) shall be addressed in writing

to the Engineering Support Department (ESD) Manager.

Any deviation from the requirements herein shall follow internal company

procedure SAEP-302.

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #MS #材料 #沙特

摘要：

本页面提供沙特阿美公司材料系统规范 32-SAMSS-009《通用汽轮机》2019版（General Purpose Steam Turbines）的SEO摘要与检索信息。该规范面向沙特阿美及石油、天然气、炼化、电力等工业项目中的通用蒸汽轮机，涵盖设备设计、材料选择、制造、检验、试验、包装运输及供货合规等要求，是工程公司、采购方、制造商和供应商进行技术选型、投标报价、质量控制与文件审查的重要依据。通过关键词“沙特阿美、32-SAMSS-009、通用汽轮机”，用户可快速定位2019年版规范编号、英

展开>> 收起<<

沙特阿美公司材料系统规范 32-SAMSS-009 通用汽轮机 2019 General Purpose Steam Turbines.PDF

共15页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

沙特阿美公司材料系统规范 32-SAMSS-009 通用汽轮机 2019 General Purpose Steam Turbines

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: