沙特阿美公司材料系统规范 31-SAMSS-009 正位移泵-可控容积式 2019 Positive Displacement Pumps-Controlled Volume

VIP专免

标准之家 2026-09-13 9 58.27KB 8 页 25星币

侵权投诉

Previous Issue: 14 March 2018 Next Planned Update: 11 February 2022

Page 1 of 8

Contact: Dhafiri, Amer A (DHAFIRAA) on phone +966-13-8809723

Materials System Specification

31-SAMSS-009 11 February 2019

Positive Displacement Pumps - Controlled Volume

Document Responsibility: Pumps, Seals and Mixers Standards Committee

Contents

1 Scope ................................................................. 2

2 Normative References ....................................... 2

5 Statutory............................................................. 3

6 Basic Design ...................................................... 3

7 Accessories ........................................................ 5

8 Inspection, Testing, and

Preparation for Shipment ................................... 7

9 Vendor's Data .................................................... 7

Revision Summary .................................................... 7

Document Responsibility: Pumps, Seals and Mixers Standards Committee 31-SAMSS-009

Issue Date: 11 February 2019

Next Planned Update: 11 February 2022 Positive Displacement Pumps - Controlled Volume

Page 2 of 8

The following paragraph numbers refer to API STD 675, Third Edition, November 2012,

which is part of this specification. The text in each paragraph below is an addition to this

specification unless it is noted as an exception. Paragraph numbers which do not appear

in API STD 675 are new paragraph numbers to be inserted in numerical order.

1 Scope

1.1 This specification, together with the Pump Data Sheet and Purchase Order,

defines the minimum mandatory requirements for positive displacement,

controlled volume pumps of the diaphragm and packed plunger types.

Diaphragm pumps using direct mechanical actuation are excluded from this

specification.

1.2 Metering pumps shall be supplied by vendors qualified by experience in

manufacturing the units proposed. To qualify, the vendor must have

manufactured, at the proposed manufacturing location, at least two pumps of

comparable speed, flow, head, power rating and discharge pressure for a

liquid of comparable characteristics. These pumps must have been in service

for at least one year and must be performing satisfactorily.

1.3 Systems manufactured under a license agreement shall carry the licensor's

written guarantee.

2 Normative References

Material or equipment supplied to this Specification shall also comply with the latest

edition of the references listed below, unless otherwise noted.

2.1 Saudi Aramco References

Saudi Aramco Engineering Procedure

SAEP-302 Waiver of a Mandatory Saudi Aramco Engineering

Requirement

Saudi Aramco Materials System Specifications

17-SAMSS-503 Severe Duty Totally Enclosed Squirrel Cage

Induction Motors to 500 HP

17-SAMSS-515 Auxiliary Electrical Systems for Skid Mounted

Equipment

34-SAMSS-831 Instrumentation for Packaged Units

Document Responsibility: Pumps, Seals and Mixers Standards Committee 31-SAMSS-009

Issue Date: 11 February 2019

Next Planned Update: 11 February 2022 Positive Displacement Pumps - Controlled Volume

Page 3 of 8

Saudi Aramco Inspection Requirements Form

175-311500 Positive Displacement Pumps - Controlled Volume

2.2 Industry Codes and Standards

American Petroleum Institute

API STD 675 Positive Displacement Pumps

International Organization for Standardization

ANSI/NACE

MR0175/ISO 15156

Petroleum and Natural Gas Industries Use in

H2S-containing Environments in Oil and Gas

Production Materials for

National Electrical Manufacturers Association

NEMA MG 1 Motors and Generators

International Electrotechnical Commission

IEC 60034 Rotating Electric Machines

5 Statutory

Any conflicts between this document and other applicable Mandatory Saudi Aramco

Engineering Requirements (MSAERs) shall be addressed to the EK&RD Coordinator.

Any deviation from the requirements herein shall follow internal company procedure

SAEP-302.

6 Basic Design

6.1 General

6.1.1 The equipment (including auxiliaries) covered by this specification shall be

designed and constructed for a minimum service life of 20 years and at least

3 years of uninterrupted operation. It is recognized that this is a design

criterion.

6.1.5 Equipment sound pressure levels shall not exceed 85 dB(A) at a distance of

one meter. Control of the sound pressure to meet this requirement shall be

the sole responsibility of the vendor.

6.1.13 (Modification) Unless otherwise specified, the equipment will be installed

outdoors in a desert area, with relative humidity from zero to 100%

(condensing) and ambient temperatures from 0°C to 50°C (32°F to 120°F).

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #MS #材料 #沙特

摘要：

本页提供沙特阿美公司材料系统规范 31-SAMSS-009《正位移泵-可控容积式》2019版（Positive Displacement Pumps-Controlled Volume）的SEO信息。该规范适用于石油、天然气、炼化及工业项目中可控容积式正位移泵的设计、选型、材料、制造、检验、试验、标识、包装和交付，涵盖计量泵、加药泵、比例泵等设备的技术要求。用户可通过31-SAMSS-009、SAMSS-009、沙特阿美正位移泵、可控容积泵、Positive Displacement Pumps

展开>> 收起<<

沙特阿美公司材料系统规范 31-SAMSS-009 正位移泵-可控容积式 2019 Positive Displacement Pumps-Controlled Volume.PDF

共8页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

沙特阿美公司材料系统规范 31-SAMSS-009 正位移泵-可控容积式 2019 Positive Displacement Pumps-Controlled Volume

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: