API MPMS Chapter 7.5-2014(R2026) 石油计量标准手册第7.5章温度测定——载运冷冻烃和化学气体流体的海船上的自动储罐温度测量；冷冻烃和非石油基液化气体燃料——海上运输船和浮式储存装置上自动储罐温度计的一般要求

VIP免费

那山那人那狗 2026-09-13 8 547.91KB 22 页 26星币

侵权投诉

Manual of Petroleum

Measurement Standards

Chapter 7.5

Temperature Determination—Automatic Tank

Temperature Measurement Onboard Marine

Vessels Carrying Refrigerated Hydrocarbon

and Chemical Gas Fluids

ANSI/API MPMS CHAPTER 7.5

FIRST EDITION, SEPTEMBER 2014

REAFFIRMED, MARCH 2026

ISO 8310:2012 (Identical), Refrigerated hydrocarbon and

non-petroleum based liquefied gaseous fuels—General

requirements for automatic tank thermometers on board

marine carriers and floating storage

Special Notes

API publications necessarily address problems of a general nature. With respect to particular circumstances, local,

state, and federal laws and regulations should be reviewed.

Neither API nor any of API's employees, subcontractors, consultants, committees, or other assignees make any

warranty or representation, either express or implied, with respect to the accuracy, completeness, or usefulness of the

information contained herein, or assume any liability or responsibility for any use, or the results of such use, of any

information or process disclosed in this publication. Neither API nor any of API's employees, subcontractors,

consultants, or other assignees represent that use of this publication would not infringe upon privately owned rights.

Classified areas may vary depending on the location, conditions, equipment, and substances involved in any given

situation. Users of this standard should consult with the appropriate authorities having jurisdiction.

Users of this standard should not rely exclusively on the information contained in this document. Sound business,

scientific, engineering, and safety judgment should be used in employing the information contained herein.

Where applicable, authorities having jurisdiction should be consulted.

Work sites and equipment operations may differ. Users are solely responsible for assessing their specific equipment

and premises in determining the appropriateness of applying the standard. At all times users should employ sound

business, scientific, engineering, and judgment safety when using this standard.

API is not undertaking to meet the duties of employers, manufacturers, or suppliers to warn and properly train and

equip their employees, and others exposed, concerning health and safety risks and precautions, nor undertaking their

obligations to comply with authorities having jurisdiction.

API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to assure the

accuracy and reliability of the data contained in them; however, the Institute makes no representation, warranty, or

guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or

damage resulting from its use or for the violation of any authorities having jurisdiction with which this publication may

conflict.

API publications are published to facilitate the broad availability of proven, sound engineering and operating

practices. These publications are not intended to obviate the need for applying sound engineering judgment

regarding when and where these publications should be utilized. The formulation and publication of API publications

is not intended in any way to inhibit anyone from using any other practices.

Any manufacturer marking equipment or materials in conformance with the marking requirements of an API standard

is solely responsible for complying with all the applicable requirements of that standard. API does not represent,

warrant, or guarantee that such products do in fact conform to the applicable API standard.

electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact the

Publisher, API Publishing Services, 200 Massachusetts Avenue, NW, Washington, DC 20001.

API Foreword

Nothing contained in any API publication is to be construed as granting any right, by implication or otherwise, for the

manufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should anything

contained in the publication be construed as insuring anyone against liability for infringement of letters patent.

Shall: As used in a standard, “shall” denotes a minimum requirement in order to conform to the specification.

Should: As used in a standard, “should” denotes a recommendation or that which is advised but not required in order

to conform to the specification.

This standard shall become effective on the date printed on the cover but may be used voluntarily from the date of

distribution.

Standards referenced herein may be replaced by other international or national standards that can be shown to meet

or exceed the requirements of the referenced standard.

This American National Standard is under the jurisdiction of the API Subcommittee on Measurement Accountability.

This standard is considered identical to the English version of ISO 8310. ISO 8310 was prepared by Technical

Committee ISO/TC 28, Subcommittee 5, Measurement of refrigerated hydrocarbon and non-petroleum based

liquefied gaseous fuels.

This document was produced under API standardization procedures that ensure appropriate notification and

participation in the developmental process and is designated as an API standard. Questions concerning the

interpretation of the content of this publication or comments and questions concerning the procedures under which

this publication was developed should be directed in writing to the Director of Standards, American Petroleum

Institute, 200 Massachusetts Avenue, NW, Washington, DC 20001. Requests for permission to reproduce or translate

all or any part of the material published herein should also be addressed to the director.

Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years. A one-time

extension of up to two years may be added to this review cycle. Status of the publication can be ascertained from the

API Standards Department, telephone (202) 682-8000. A catalog of API publications and materials is published

annually by API, 200 Massachusetts Avenue, NW, Washington, DC 20001.

Suggested revisions are invited and should be submitted to the Standards Department, API, 200 Massachusetts

Avenue, NW, Washington, DC 20001, standards@api.org.

iii

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #测量 #PM #测定

摘要：

API MPMS Chapter 7.5-2014(R2026)《石油计量标准手册第7.5章温度测定——载运冷冻烃和化学气体流体的海船上的自动储罐温度测量；冷冻烃和非石油基液化气体燃料——海上运输船和浮式储存装置上自动储罐温度计的一般要求》是石油与液化气体计量领域的重要标准规范。该标准规定了在载运冷冻烃、化学气体流体、冷冻烃及非石油基液化气体燃料的海船、海上运输船和浮式储存装置上，自动储罐温度计的选型、安装、校验、操作与温度测量一般要求，适用于自动储罐温度测量系统的设计、验收、运行和维护。通

展开>> 收起<<

API MPMS Chapter 7.5-2014(R2026) 石油计量标准手册第7.5章温度测定——载运冷冻烃和化学气体流体的海船上的自动储罐温度测量；冷冻烃和非石油基液化气体燃料——海上运输船和浮式储存装置上自动储罐温度计的一般要求.pdf

共22页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

API MPMS Chapter 7.5-2014(R2026) 石油计量标准手册第7.5章温度测定——载运冷冻烃和化学气体流体的海船上的自动储罐温度测量；冷冻烃和非石油基液化气体燃料——海上运输船和浮式储存装置上自动储罐温度计的一般要求

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

API MPMS Chapter 7.5-2014(R2026) 石油计量标准手册 第7.5章 温度测定——载运冷冻烃和化学气体流体的海船上的自动储罐温度测量；冷冻烃和非石油基液化气体燃料——海上运输船和浮式储存装置上自动储罐温度计的一般要求

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

API MPMS Chapter 7.5-2014(R2026) 石油计量标准手册第7.5章温度测定——载运冷冻烃和化学气体流体的海船上的自动储罐温度测量；冷冻烃和非石油基液化气体燃料——海上运输船和浮式储存装置上自动储罐温度计的一般要求