ASM HandBook Volume 20 - Materials Selection and Design

逍遥书生 2024-09-05 58 32.27MB 2005 页 25星币

侵权投诉

VOLUME

ASM

INTERNATIONAL ®

The Materials

Information Company

Publication Information and Contributors

Materials Selection and Design was published in 1997 as Volume 20 of ASM Handbook. The Volume was prepared under

the direction of the ASM International Handbook Committee.

Volume Chair

The Volume Chair was George E. Dieter.

Authors and Contributors

• Peter Andresen General Electric Corporate Research and Development Center

• Michael F. Ashby Cambridge University

• Anne-Marie M. Baker University of Massachusetts

• Charles A. Barrett NASA Lewis Research Center

• Carol M.F. Barry University of Massachusetts

• Raymond Bayer Tribology Consultant

• Michael Blinn Materials Characterization Laboratory

• Bruce E. Boardman Deere & Company Technical Center

• Geoffrey Boothroyd Boothroyd Dewhurst Inc.

• David L. Bourell The University of Texas at Austin

• James G. Bralla Manufacturing Consultant

• Bruce L. Bramfitt Bethlehem Steel Corporation

• Peter R. Bridenbaugh Alcoa Technical Center

• Eric W. Brooman Concurrent Technologies Corporation

• Ronald N. Caron Olin Corporation

• Umesh Chandra Concurrent Technologies Corporation

• Joel P. Clark Massachusetts Institute of Technology

• Don P. Clausing Massachusetts Institute of Technology

• Thomas H. Courtney Michigan Technological University

• Mark Craig Variation Systems Analysis, Inc.

• James E. Crosheck CADSI

• Shaun Devlin Ford Motor Company

• Donald L. Dewhirst Ford Motor Company

• R. Judd Diefendorf Clemson University

• George E. Dieter University of Maryland

• John R. Dixon University of Massachusetts

• William E. Dowling, Jr. Ford Motor Company

• Stephen F. Duffy Cleveland State University

• Lance A. Ealey McKinsey & Company

• Peter Elliot Corrosion and Materials Cosultancy Inc.

• Mahmoud M. Farag American University in Cairo

• Frank R. Field III Massachusetts Institute of Technology

• B. Lynn Ferguson Deformation Control Technology

• Shirley Fleischmann Grand Valley State University

• F. Peter Ford General Electric Corporate Research and Development Center

• Theodore C. Fowler Fowler & Whitestone

• Victor A. Greenhut Rutgers--The State University of New Jersey

• Daniel C. Haworth General Motors Research and Development Center

• Richard W. Heckel Michigan Technological University

• David P. Hoult Massachusetts Institute of Technology

• Kenneth H. Huebner Ford Motor Company

• Thomas A. Hunter Forensic Engineering Consultants, Inc.

• Lesley A. Janosik NASA Lewis Research Center

• Geza Kardos Carleton University

• Erhard Krempl Rensselaer Polytechnic Institute

• Howard A. Kuhn Concurrent Technologies Corporation

• Richard C. Laramee Intermountain Design, Inc.

• John MacKrell CIMdata

• Arnold R. Marder Lehigh University

• C. Lawrence Meador Massachusetts Institute of Technology

• Edward Muccio Ferris State University

• Peter O'Rourke Los Alamos National Laboratory

• Kevin N. Otto Massachusetts Institute of Technology

• Nagendra Palle Ford Motor Company

• Anand J. Paul Concurrent Technologies Corporation

• Thomas S. Piwonka The University of Alabama

• Hans H. Portisch Krupp VDM Austria GmbH

• Raj Ranganathan General Motors Corporation

• Richard C. Rice Battelle Columbus

• Mark L. Robinson Hamilton Precision Metals

• Richard Roth Massachusetts Institute of Technology

• Eugene Rymaszewski Rensselaer Polytechnic Institute

• K. Sampath Concurrent Technologies Corporation

• Howard Sanderow Management and Engineering Technologies

• Jon Schaeffer General Electric Aircraft Engines

• John A. Schey University of Waterloo

• James Smialek NASA Lewis Research Center

• Charles O. Smith Engineering Consultant

• Douglas E. Smith Ford Motor Company

• Preston G. Smith New Product Dynamics

• James T. Staley Alcoa Technical Center

• David A. Stephenson General Motors Corporation

• Henry Stoll Northwestern University

• Charles L. Thomas University of Utah

• Gerald Trantina General Electric Corporate Research and Development Center

• B. Lee Tuttle GMI Engineering and Management Institute

• George F. Vander Voort Buehler Ltd.

• Anthony J. Vizzini University of Maryland

• Gary A. Vrsek Ford Motor Company

• Volker Weiss Syracuse University

• Jack H. Westbrook Brookline Technologies

• James C. Williams General Electric Aircraft Engines

• Roy Williams Materials Characterization Laboratory

• Kristin L. Wood University of Texas

• David A. Woodford Materials Performance Analysis, Inc.

Reviewers

• John Abraham Purdue University

• Robert M. Aiken, Jr. Case Western Reserve University

• David J. Albert Albert Consulting Group

• C. Wesley Allen CWA Engineering

• William Anderson Automated Analysis Corporation

• Harry W. Antes SPS Technologies (retired)

• William R. Apblett Amet Engineering

• Michael F. Ashby Cambridge University

• Carl Baker Pacific Northwest National Laboratory

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载

摘要：

This authoritative handbook, ASM Handbook Volume 20 - Materials Selection and Design, serves as an essential resource for engineers and materials scientists seeking to optimize product performance through systematic material selection and design inte

展开>> 收起<<

ASM HandBook Volume 20 - Materials Selection and Design.pdf

共2005页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

ASM HandBook Volume 20 - Materials Selection and Design

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: