IEEE Std C37.09-2018

VIP免费

Carl 2024-09-06 65 5.09MB 119 页 18星币

侵权投诉

IEEE Standard Test Procedures for

AC High-Voltage Circuit Breakers

with Rated Maximum Voltage

Above 1000 V

Sponsored by the

Switchgear Committee

IEEE

3 Park Avenue

New York, NY 10016-5997

USA

IEEE Power and Energy Society

IEEE Std C37.09™-2018

(Revision of

IEEE Std C37.09-1999)

IEEE Std C37.09™-2018

(Revision of

IEEE Std C37.09-1999)

IEEE Standard Test Procedures for

AC High-Voltage Circuit Breakers

with Rated Maximum Voltage

Above 1000 V

Sponsor

Switchgear Committee

of the

IEEE Power and Energy Society

Approved 5 December 2018

IEEE-SA Standards Board

Abstract: The testing procedures for all high-voltage circuit breakers that include voltage ratings

above 1000 V ac and comprise both indoor and outdoor types having the preferred ratings as listed

in IEEE Std C37.04™ are covered. Typical circuit breakers covered by these standards have

maximum voltage ratings from 4.76 kV through 800 kV, and continuous current ratings of 600 A

through 5000 A associated with the various maximum voltage ratings. The test procedures verify

all assigned ratings, including continuous current, dielectric withstand voltages, short-circuit

current, transient recovery voltage, and capacitor switching, plus associated capabilities such as

mechanical endurance, load current, and out-of-phase switching. Production test procedures are

also included. This standard does not cover generator circuit breakers as these are covered in

IEC/IEEE 62271-37-013.

Keywords: arcing time, direct test, IEEE C37.09™, mechanical endurance, operating duty, power

frequency, short-circuit current, short-line fault, single-phase testing, synthetic test, test data

reporting, three-phase testing, transient recovery voltage, unit test

•

The Institute of Electrical and Electronics Engineers, Inc.

3 Park Avenue, New York, NY 10016-5997, USA

IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers,

Incorporated.

PDF: ISBN 978-1-5044-5437-7 STD23486

Print: ISBN 978-1-5044-5438-4 STDPD23486

IEEE prohibits discrimination, harassment, and bullying.

For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.

No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission

of the publisher.

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

IEEE Std C37.09-2018 是由电气与电子工程师协会发布的国际标准，全称为《IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis》。该标准详细规定了交流高压断路器在对称电流额定值基础上的统一测试程序、试验方法及性能验证要求，涵盖绝缘、开断、关合、温升、机械操作及暂态恢复电压等关键试验项目。作为电力系统中开关设备设计、制造、型式试验与

展开>> 收起<<

IEEE Std C37.09-2018.pdf

共119页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

IEEE Std C37.09-2018

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: