IEEE Std C37.100.1-2018

VIP免费

Carl 2024-09-06 14 4.33MB 99 页 18星币

侵权投诉



IEEE Standard for Common

Requirements for High-Voltage Power

Switchgear Rated Above 1000 V

Sponsored by the

Switchgear Committee

IEEE

3 Park Avenue

New York, NY 10016-5997

USA

IEEE Power and Energy Society

IEEE Std C37.100.1™-2018

(Revision of IEEE Std C37.100.1-2007)

IEEE Std C37.100.1™-2018

(Revision of IEEE Std C37.100.1-2007)

IEEE Standard for Common

Requirements for High-Voltage Power

Switchgear Rated Above 1000 V

Sponsor

Switchgear Committee

of the

IEEE Power and Energy Society

Approved 5 December 2018

IEEE-SA Standards Board

Abstract: This standard applies to alternating current (ac) switchgear, designed for both indoor

and outdoor installation and for operation at service frequencies up to and including 60 Hz on

systems having voltages above 1000 V.

This standard is applied in relevant equipment standards by a normative reference to this

standard, IEEE Std C37.100.1, on a section or clause-by-clause basis. Annex A of this standard

provides recommendations for its application. The inclusion of this standard as a normative

reference shall not imply that all of the requirements contained herein apply as a default. In the

absence of a normative reference, this standard shall be considered informative only. In case of a

conflict in requirements, the requirements of the relevant equipment standard shall prevail.

Keywords: common, IEEE C37.100.1, rated, rating, requirement, specification, switch,

switchgear, test

•

The Institute of Electrical and Electronics Engineers, Inc.

3 Park Avenue, New York, NY 10016-5997, USA

IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers,

Incorporated.

SECOND PRINTING: 20 June 2019 Missing Figure 2 in 7.3.6.2 added.

PDF: ISBN 978-1-5044-5447-6 STD23491

Print: ISBN 978-1-5044-5448-3 STDPD23491

IEEE prohibits discrimination, harassment, and bullying.

For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.

No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission

of the publisher.

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

IEEE Std C37.100-2018 是国际电气与电子工程师学会发布的关于高压开关设备和控制设备通用要求的最新标准，全称为“IEEE Standard Common Requirements for High-Voltage Switchgear and Controlgear”。该标准整合并取代了此前多个分散的标准条款，为额定电压超过1000伏的开关设备提供了统一的性能要求、测试方法、环境适应性条件及安全规范，适用于断路器、隔离开关、接地开关、负荷开关等高压设备的制造与检验。其核心内容包

展开>> 收起<<

IEEE Std C37.100.1-2018.pdf

共99页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

IEEE Std C37.100.1-2018

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: