IEEE Std 149-2021

VIP免费
Carl 2024-09-06 90 9.5MB 207 页 20星币
侵权投诉
STANDARDS
IEEE Recommended Practice for
Antenna Measurements
IEEE Standards Antennas and Propagation Society
Developed by the
Antennas and Propagation Standards Committee
IEEE Std 149™-2021
(Revision of IEEE Std 149-1977)
IEEE Std 149™-2021
(Revision of IEEE Std 149-1977)
IEEE Recommended Practice for
Antenna Measurements
Developed by the
Antennas and Propagation Standards Committee
of the
IEEE Antennas and Propagation Society
Approved 23 September 2021
IEEE SA Standards Board
2
Abstract: The recommended practices for the measurement of antenna transmitting and
receiving properties are presented. Throughout this standard it is assumed that the antenna to be
measured can be treated as a passive, linear, and reciprocal device. A fundamental property of
any antenna is its radiation pattern. The measurement of radiation patterns in an antenna test
facility is discussed. The design of antenna test facilities is described along with instrumentation
requirements for the proper operation of the antenna facility, directions for the evaluation of an
(existing) range, and the operation of ranges is discussed. References are provided that are
illustrative of measurement techniques and in which details may be found.
Keywords: absorbers, accuracy, alignment, anechoic, antenna, antenna gain, antenna
measurements, calibration, chamber, compact range, EIRP, electromagnetic compatibility,
electromagnetic testing, EMC, equivalent isotropically radiated power, errors, evaluation,
facilities, far field, far-field range, gain/temperature, ground bounce, high power, IEEE 149,
impedance, instrumentation, inter-range comparison, measurement, near-field, near zone, noise,
outdoor range, passive, pattern, phase, polarization, probe, quiet zone, radar, radiation, radio
frequency, radome, range, receiver, reflector, safety, scale model, scanner, software, standard
gain horn, standard, tapered chamber, target support, techniques, test facility, test range, test
zone, three-antenna measurement, tracking, uncertainties, uncertainty analysis, verification
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2022 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 18 February 2022. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.
PDF: ISBN 978-1-5044-8017-8 STD24975
Print: ISBN 978-1-5044-8018-5 STDPD24975
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit https://www.ieee.org/about/corporate/governance/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
摘要:

IEEE Std 149-2021 是电气与电子工程师协会发布的最新版天线测量与控制标准,取代了之前的版本,为天线参数的测试方法与流程提供了统一、权威的技术规范。该标准覆盖从低频到毫米波频段的天线辐射方向图、增益、极化、阻抗及相位中心的测量技术与评估要求,适用于实验室、暗室及外场测试场景。文档详细介绍了远场、近场、紧缩场等主要测试方法的设计原则、误差源分析与校准流程,并新增了对MIMO天线、波束赋形阵列及毫米波天线的测量指南。遵循 IEEE Std 149-2021 能确保天线性能测试结果的可重

展开>> 收起<<
IEEE Std 149-2021.pdf

共207页,预览4页

还剩页未读, 继续阅读

声明:本文档系会员上传,若文档所含内容侵犯了您的版权或隐私,请立即通知,我们立即给予侵权申诉删除!
作者:Carl 分类:国外协会 价格:20星币 属性:207 页 大小:9.5MB 格式:PDF 时间:2024-09-06

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务
/ 207
客服
关注