SAE AMS 5625E-2018

VIP免费
Carl 2024-09-07 10 1013.87KB 7 页 20星币
侵权投诉
__________________________________________________________________________________________________________________________________________
SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely
voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”
SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and
suggestions.
Copyright © 2018 SAE International
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of SAE.
TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)
Tel: +1 724-776-4970 (outside USA)
Fax: 724-776-0790
Email: CustomerService@sae.org
SAE WEB ADDRESS: http://www.sae.org
SAE values your input. To provide feedback on this
Technical Report, please visit
http://standards.sae.org/AMS5625E
AEROSPACE
MATERIAL SPECIFICATION
AMS5625™
REV. E
Issued 1955-08
Revised 1990-01
Noncurrent 2000-03
Reaf. Nonc. 2013-04
Stabilized 2018-02
Superseding AMS5625D
Steel Bars, High Expansion
9.5Ni - 5.5Mn (0.55 - 0.65C)
Cold Finished
K91456
RATIONALE
AMS5625E stabilizes this document because it contains mature technology that is not expected to change and thus no
further revisions are anticipated.
STABILIZED NOTICE
AMS5625E has been declared "STABILIZED" by SAE AMS Committee F Corrosion Heat Resistant Alloys. This document
was stabilized because this document contains mature technology that is not expected to change and thus no further
revisions are anticipated. Previously this document was non-current. The last technical update of this document occurred
in January, 1990. Users of this document should refer to the cognizant engineering organization for disposition of any
issues with reports/certifications to this specification; including exceptions listed on the certification.
NOTE: In many cases, the purchaser may represent a sub tier supplier and not the cognizant engineering organization.
Downloaded from SAE International by Univ of Toronto, Thursday, December 23, 2021
SAE INTERNATIONAL
AMS5625™E
_________________________________________________________________________________________________
Downloaded from SAE International by Univ of Toronto, Thursday, December 23, 2021
SAE INTERNATIONAL
AMS5625™E
_________________________________________________________________________________________________
Downloaded from SAE International by Univ of Toronto, Thursday, December 23, 2021
摘要：

SAE AMS 5625E-2018 是一项由国际自动机工程师学会发布的最新修订版航空航天材料规范，专门针对耐腐蚀及耐高温的易切削不锈钢棒材、线材、锻件及结构件提出明确要求。该标准适用于在高达600°F（约316°C）环境下需要高强度和良好耐腐蚀性能的航空航天零部件制造，其核心材料为含硫的416型马氏体不锈钢。AMS 5625E修订版对化学成分、热处理工艺、拉伸性能及微观组织控制进行了更新与优化，以确保材料在航空发动机、液压系统及紧固件等关键应用中的可靠性与一致性。本规范取代了AMS 5625D

展开>> 收起<<
SAE AMS 5625E-2018.pdf

共7页,预览4页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：Carl 分类：国外协会 价格：20星币 属性：7 页 大小：1013.87KB 格式：PDF 时间：2024-09-07

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 7
评分 收藏
分享
立即下载 VIP免费下载
客服
关注