ISO 10984-1-2009

VIP免费

阿拉丁 2024-09-09 8 297.6KB 20 页 12星币

侵权投诉

Reference number

ISO 10984-1:2009(E)

INTERNATIONAL

STANDARD

ISO

10984-1

First edition

2009-08-15

Timber structures — Dowel-type

fasteners —

Part 1:

Determination of yield moment

Structures en bois — Éléments de fixation de type cheville —

Partie 1: Détermination du moment plastique

ISO 10984-1:2009(E)

PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.

Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.

ISO copyright office

Case postale 56 • CH-1211 Geneva 20

Tel. + 41 22 749 01 11

Fax + 41 22 749 09 47

E-mail copyright@iso.org

Web www.iso.org

Published in Switzerland

ISO 10984-1:2009(E)

Contents Page

Foreword............................................................................................................................................................ iv

Introduction ........................................................................................................................................................ v

1 Scope ..................................................................................................................................................... 1

2 Terms and definitions........................................................................................................................... 1

3 Symbols ................................................................................................................................................. 2

4 Requirements ........................................................................................................................................ 2

5 Test method........................................................................................................................................... 2

6 Test report ............................................................................................................................................. 7

Annex A (informative) Fastener bending apparatus used for method A...................................................... 9

Bibliography ..................................................................................................................................................... 12

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #ISO

摘要：

ISO 10984-1-2009 是国际标准化组织发布的关于木结构用紧固件（如销钉类连接件）的测试方法标准，全称为《木结构紧固件—第1部分：销钉类紧固件承压强度确定》。该标准规定了实验室条件下测定木材与木基板材在承受嵌入式销钉类紧固件（如钉子、螺栓、螺钉等）时的承压强度与破坏模式的方法，适用于工程木结构连接设计和性能评估。通过标准化的加载速率、试件尺寸和记录要求，确保不同材料和构件之间测试结果的可比性与重复性。该标准是木结构工程、建筑设计和产品质量控制领域的重要参考文件，广泛应用于欧洲、亚洲及北

展开>> 收起<<

ISO 10984-1-2009.pdf

共20页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

ISO 10984-1-2009

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: