ANSI AAMI ISO 26782-2015 & cor1-2015

VIP专免

Carl 2024-09-14 15 840KB 41 页 18星币

侵权投诉

ANSI/AAMI/

ISO 26782:

2015 & Cor. 1:

2015

(Consolidated text)

Anaesthetic and respiratory

equipment — Spirometers

intended for the

measurement of time forced

expired volumes in humans

American

National

Standard

Objectives and uses of AAMI standards and

recommended practices

It is most important that the objectives and potential uses of an

AAMI product standard or recommended practice are clearly

understood. The objectives of AAMI's technical development

program derive from AAMI's overall mission: the advancement of

medical instrumentation. Essential to such advancement are (1) a

continued increase in the safe and effective application of current

technologies to patient care, and (2) the encouragement of new

technologies. It is AAMI's view that standards and recommended

practices can contribute significantly to the advancement of

medical instrumentation, provided that they are drafted with

attention to these objectives and provided that arbitrary and

restrictive uses are avoided.

A voluntary standard for a medical device recommends to the

manufacturer the information that should be provided with or on

the product, basic safety and performance criteria that should be

considered in qualifying the device for clinical use, and the

measurement techniques that can be used to determine whether the

device conforms with the safety and performance criteria and/or to

compare the performance characteristics of different products.

Some standards emphasize the information that should be provided

with the device, including performance characteristics, instructions

for use, warnings and precautions, and other data considered

important in ensuring the safe and effective use of the device in the

clinical environment. Recommending the disclosure of

performance characteristics often necessitates the development of

specialized test methods to facilitate uniformity in reporting;

reaching consensus on these tests can represent a considerable part

of committee work. When a drafting committee determines that

clinical concerns warrant the establishment of minimum safety and

performance criteria, referee tests must be provided and the reasons

for establishing the criteria must be documented in the rationale.

A recommended practice provides guidelines for the use, care,

and/or processing of a medical device or system. A recommended

practice does not address device performance per se, but rather

procedures and practices that will help ensure that a device is used

safely and effectively and that its performance will be maintained.

Although a device standard is primarily directed to the

manufacturer, it may also be of value to the potential purchaser or

user of the device as a frame of reference for device evaluation.

Similarly, even though a recommended practice is usually oriented

towards healthcare professionals, it may be useful to the

manufacturer in better understanding the environment in which a

medical device will be used. Also, some recommended practices,

while not addressing device performance criteria, provide

guidelines to industrial personnel on such subjects as sterilization

processing, methods of collecting data to establish safety and

efficacy, human engineering, and other processing or evaluation

techniques; such guidelines may be useful to health care

professionals in understanding industrial practices.

In determining whether an AAMI standard or recommended

practice is relevant to the specific needs of a potential user of the

document, several important concepts must be recognized:

All AAMI standards and recommended practices are voluntary

(unless, of course, they are adopted by government regulatory or

procurement authorities). The application of a standard or

recommended practice is solely within the discretion and

professional judgment of the user of the document.

Each AAMI standard or recommended practice reflects the

collective expertise of a committee of health care professionals and

industrial representatives, whose work has been reviewed

nationally (and sometimes internationally). As such, the consensus

recommendations embodied in a standard or recommended practice

are intended to respond to clinical needs and, ultimately, to help

ensure patient safety. A standard or recommended practice is

limited, however, in the sense that it responds generally to

perceived risks and conditions that may not always be relevant to

specific situations. A standard or recommended practice is an

important reference in responsible decision-making, but it should

never replace responsible decision-making.

Despite periodic review and revision (at least once every five

years), a standard or recommended practice is necessarily a static

document applied to a dynamic technology. Therefore, a standards

user must carefully review the reasons why the document was

initially developed and the specific rationale for each of its

provisions. This review will reveal whether the document remains

relevant to the specific needs of the user.

Particular care should be taken in applying a product standard

to existing devices and equipment, and in applying a recommended

practice to current procedures and practices. While observed or

potential risks with existing equipment typically form the basis for

the safety and performance criteria defined in a standard,

professional judgment must be used in applying these criteria to

existing equipment. No single source of information will serve to

identify a particular product as "unsafe". A voluntary standard can

be used as one resource, but the ultimate decision as to product

safety and efficacy must take into account the specifics of its

utilization and, of course, cost-benefit considerations. Similarly, a

recommended practice should be analyzed in the context of the

specific needs and resources of the individual institution or firm.

Again, the rationale accompanying each AAMI standard and

recommended practice is an excellent guide to the reasoning and

data underlying its provision.

In summary, a standard or recommended practice is truly

useful only when it is used in conjunction with other sources of

information and policy guidance and in the context of professional

experience and judgment.

INTERPRETATIONS OF AAMI STANDARDS

AND RECOMMENDED PRACTICES

Requests for interpretations of AAMI standards and recommended

practices must be made in writing, to the AAMI Vice President,

Standards Policy and Programs. An official interpretation must be

approved by letter ballot of the originating committee and

subsequently reviewed and approved by the AAMI Standards

Board. The interpretation will become official and representation of

the Association only upon exhaustion of any appeals and upon

publication of notice of interpretation in the "Standards Monitor"

section of the AAMI News. The Association for the Advancement

of Medical Instrumentation disclaims responsibility for any

characterization or explanation of a standard or recommended

practice which has not been developed and communicated in

accordance with this procedure and which is not published, by

appropriate notice, as an official interpretation in the AAMI News.

American National Standard ANSI/AAMI/ISO 26782:2015 & Cor. 1:2015

(Consolidated text)

Anaesthetic and respiratory equipment — Spirometers

intended for the measurement of time forced expired

volumes in humans

Approved 4 November 2015 by

AAMI

Approved 29 December 2015 by

American National Standards Institute

Abstract: Specifies requirements for SPIROMETERS intended for the assessment of pulmonary function in humans

weighing more than 10 kg. Applies to a SPIROMETER that measure timed forced expired volumes, either

as part of an integrated lung function device or as a stand-alone device, irrespective of the measuring

method employed.

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #ISO

摘要：

该文档标题为 ANSI AAMI ISO 26782-2015 & cor1-2015，是一项针对特定医疗设备或系统（通常涉及麻醉与呼吸设备领域）的国际标准化文件。该标准由美国国家标准学会（ANSI）、美国医疗器械促进协会（AAMI）与国际标准化组织（ISO）联合发布，主标准版本为2015年制定，并包含同年的第一号技术勘误（cor1-2015）。内容主要规定了相关设备的设计、性能、测试方法及安全要求，旨在确保医疗器械在全球范围内的互换性、可靠性与患者安全性。无论是制造商、检测机构、医疗监管人员还

展开>> 收起<<

ANSI AAMI ISO 26782-2015 & cor1-2015.pdf

共41页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

ANSI AAMI ISO 26782-2015 & cor1-2015

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: