CAN CGSB 3.14-2013

VIP专免

Carl 2024-09-14 8 231.4KB 19 页 16星币

侵权投诉

CAN/CGSB-3.14-2013

Supersedes CAN/CGSB-3.14-2006

Propane for Fuel Purposes

ICS 75.160.20

National Standard of Canada

The CANADIAN GENERAL STANDARDS BOARD (CGSB),

under whose auspices this National Standard of Canada has been

developed is a government agency within Public Works and

Government Services Canada. CGSB is engaged in the production

of voluntary standards in a wide range of subject areas through the

media of standards committees and the consensus process. The

standards committees are composed of representatives of relevant

interests including producers, consumers and other users, retailers,

governments, educational institutions, technical, professional and

trade societies, and research and testing organizations. Any given

standard is developed on the consensus of views expressed by

such representatives.

CGSB has been accredited by the Standards Council of Canada as

a national standards-development organization. The standards that

it develops and offers as National Standards of Canada conform to

the criteria and procedures established for this purpose by the

Standards Council of Canada. In addition to standards it publishes

as national standards, CGSB produces standards to meet particular

needs, in response to requests from a variety of sources in both the

public and private sectors. Both CGSB standards and CGSB

national standards are developed in conformance with the policies

described in the CGSB Policy Manual for the Development and

Review of Standards.

CGSB standards are subject to review and revision to ensure that

they keep abreast of technological progress. Suggestions for their

improvement, which are always welcome, should be brought to

the notice of the standards committees concerned. Changes to

standards are issued either as separate amendment sheets or in

new editions of standards.

An up-to-date listing of CGSB standards, including details

on latest issues and amendments, and ordering instructions,

is found in the CGSB Catalogue, which is published annually

and is available without charge upon request. More information is

available about CGSB products and services at our Web site —

www.tpsgc-pwgsc.gc.ca/ongc-cgsb.

Although the intended primary application of this standard is

stated in its Scope, it is important to note that it remains the

responsibility of the users of the standard to judge its suitability

for their particular purpose.

The testing and evaluation of a product against this standard may

require the use of materials and/or equipment that could be

hazardous. This document does not purport to address all the

safety aspects associated with its use. Anyone using this standard

has the responsibility to consult the appropriate authorities and to

establish appropriate health and safety practices in conjunction

with any applicable regulatory requirements prior to its use.

CGSB neither assumes nor accepts any responsibility for any

injury or damage that may occur during or as the result of tests,

wherever performed.

Attention is drawn to the possibility that some of the elements of

this Canadian standard may be the subject of patent rights. CGSB

shall not be held responsible for identifying any or all such patent

rights. Users of this standard are expressly advised that

determination of the validity of any such patent rights is entirely

their own responsibility.

Further information on CGSB and its services and standards may

be obtained from:

The Manager

Standards Division

Canadian General Standards Board

Gatineau, Canada

K1A 1G6

The Standards Council of Canada (SCC) is the coordinating body

of the Canadian standardization network, which is composed of

people and organizations involved in the development, promotion

and implementation of standards. Through the collaborative

efforts of Canadian standardization network members,

standardization is helping to advance the social and economic

well-being of Canada and to safeguard the health and safety of

Canadians. The network’s efforts are overseen by SCC. The

principal objectives of SCC are to foster and promote voluntary

standardization as a means of advancing the national economy,

supporting sustainable development, benefiting the health, safety

and welfare of workers and the public, assisting and protecting the

consumer, facilitating domestic and international trade, and

furthering international cooperation in relation to standardization.

An important facet of the Canadian standards development system

is the use of the following principles: consensus; equal access and

effective participation by concerned interests; respect for diverse

interests and identification of those who should be afforded access

to provide the needed balance of interests; mechanism for dispute

resolution; openness and transparency; open access by interested

parties to the procedures guiding the standards development

process; clarity with respect to the processes; and Canadian

interest consideration as the initial basis for the development of

standards. A National Standard of Canada (NSC) is a standard

prepared or reviewed by an SCC-accredited SDO and approved

by the SCC according to NSC approval requirements. Approval

does not refer to the technical content of the standard, as this

remains the responsibility of the SDO. An NSC reflects a

consensus of a number of capable individuals whose collective

interests provide, to the greatest practicable extent, a balance of

representation of general interests, producers, regulators, users

(including consumers) and others with relevant interests, as may

be appropriate to the subject at hand. NSCs are intended to make a

significant and timely contribution to the Canadian interest.

Those who have a need to apply standards are encouraged to use

NSCs. These standards are subject to periodic review. Users of

NSCs are cautioned to obtain the latest edition from the SDO that

publishes the standard.

The responsibility for approving standards as NSCs rests with:

Standards Council of Canada

270 Albert Street, Suite 200

Ottawa, Ontario K1P 6N7, CANADA

How to order Publications:

by telephone — 819-956-0425 or

— 1-800-665-2472

by fax — 819-956-5740

by mail — CGSB Sales Centre

Gatineau, Canada

K1A 1G6

in person — Place du Portage

Phase III, 6B1

11 Laurier Street

Gatineau, Quebec

by email — ncr.cgsb-ongc@tpsgc-pwgsc.gc.ca

on the Web — www.tpsgc-pwgsc.gc.ca/ongc-cgsb

NATIONAL STANDARD OF CANADA CAN/CGSB-3.14-2013

Supersedes CAN/CGSB-3.14-2006

PROPANE FOR FUEL PURPOSES

CETTE NORME NATIONALE DU CANADA EST DISPONIBLE EN VERSIONS

FRANÇAISE ET ANGLAISE.

NATIONAL STANDARD OF CANADA CAN/CGSB-3.14-2006

Prepared by the Approved by the

Canadian General Standards Board Standards Council of Canada

Published May 2013 by the

Canadian General Standards Board

Gatineau, Canada K1A 1G6

as represented by the Minister of Public Works and Government Services,

the Minister responsible for the Canadian General Standards Board (2013).

No part of this publication may be reproduced in any form without the prior permission of the publisher.

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

CAN CGSB 3.14-2013 是加拿大通用标准委员会（CGSB）制定的一项关键柴油燃料标准，主要针对中等馏分柴油的质量、性能与环保要求进行详细规范。该标准适用于多种环境条件，确保柴油在低温、高海拔或极端气候下的稳定性与可靠性。它涵盖了硫含量、十六烷值、粘度、密度、闪点及冷滤点等核心技术指标，并对生物柴油掺混比例、添加剂使用提出了明确指导。该标准在加拿大具有强制性或推荐性地位，广泛应用于交通运输、农业机械、工程设备及发电机组等领域。遵循 CAN CGSB 3.14-2013 能有效保障发动

展开>> 收起<<

CAN CGSB 3.14-2013.pdf

共19页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

CAN CGSB 3.14-2013

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: